Electrical Properties Investigation in PA12/PANI Composites

Summary: Volume conducting PA-12 based composites powders were chemically prepared by in situ polymerization and aniline doping at room temperature. These kinds of polyamide / PANI composites were investigated regarding their electrical properties. Their ac and dc electrical properties measured in the frequency range of 10⁻²–10⁷ Hz are reported and the frequency dependence of electrical conductivity was investigated as a function of PANI concentration leading to the determination of the conductivity. The experimental conductivity was found to increase continuously with PANI content and explained by percolation theory with a relatively low percolation threshold of about 0.4 wt.%. The dielectric behavior of various PANI polymer composites has been characterized by the critical frequency ω_c (denoting the crossover from the dc plateau of the conductivity to its frequency dependent ac behaviour). Modelling the conductivity behavior versus volume fraction using Slupkowski approach has revealed that the considered parameters are not sufficient to describe the electrical conductivity behavior.     

New Method for Covalent Fluorescent Biomolecule Labeling with Hemicyanine Dye

Fluorescent chromophore, alkylamino-(tetra-hydronaphthalenylidene)- benzothiazolium derivatives (HBTN dyes), are proposed as covalent labels for proteins via aliphatic amino groups. Spectral-luminescent properties of 3-methyl-2-{(E)-[7-(methylamino)-4,4a,5,6-tetra-hydronaphthalen-2(3H)-ylidene]methyl}-1,3-benzothiazol-3-ium chloride (HBTN, R=Me) and its predecessor, 2-[(E)-(7-methoxy-4,4a,5,6-tetrahydronaphthalen-2(3H)-ylidene)methyl]-3-methyl-1,3-benzothia-zol-3-ium chloride (ABTN), are studied for free dyes and in the presence of DNA and BSA. Considerable spectral-luminescent changes accompany the transformation of ABTN into HBTN that allows monitoring conjugation reaction. In presence of DNA and BSA the HBTN increases its emission in 15 and 4 times respectively and becomes strongly fluorescent. The conditions for labeling are developed and a model conjugate of HBTN dye with BSA is synthesized. It was shown that using of HBTN dye as a fluorescent label allows detection by eye of about 3 μg/band of BSA on polyacrylamide gel upon UV-irradiation.     

Nanomechanical testing of ODS steels irradiated with 1 MeV/amu heavy ions

Development of oxide dispersion strengthened (ODS) steels, as candidates for fuel claddings for Gen IV nuclear reactors, requires a comprehensive study of their behaviour under operating conditions. In this work, 1.2 MeV/amu Kr and Xe irradiation was used to simulate fission fragment impact. New irradiation approaches with respect to a non-homogeneous damage profile under ion irradiation were proposed. Hardness profiles of irradiated ODS steels were obtained by continuous stiffness measurements with subsequent analysis of size effects according to the Nix–Gao model. It was found, that heavy ion irradiation leads to hardness saturation in ODS steels in a damage dose range of 0.1–1 dpa. Observed hardening is about 20% and is not connected with the radiation stability of Y–Ti–O and Y–Al–O oxide particles in ODS steels as it was studied by TEM.     

Authentication of Rhodiola rosea,Rhodiola quadrifida and Rhodiola rosea liquid extract from the Ukrainian market using HPTLC chromatographic profiles

Abstract

Rhodiola rosea and Rhodiola quadrifida are widely distributed and sold in Eastern Europe. The purpose of this paper was to identify R.rosea, R.quadrifida and Rhodiola rosea liquid extract (RRLE) in the Ukrainian market and bring out adulteration cases using chromatographic characterisation by HPTLC. The multiple samples of R.rosea, R.quadrifida and RRLE were compared; the optimal chromatographic conditions for identification of R.rosea and RRLE based on the presence of rosavins and salidroside as well as for identification of R.quadrifida based on the presence of salidroside were proposed; the specific HPTLC fingerprints were obtained; the acceptance criteria for each product were set. The adulteration cases for R.rosea and RRLE samples were established. The dependence on handling R.rosea and presence of rosavins was determined. It was assumed that low-quality raw materials or inefficient technology process were used for RRLE. The consistency of HPTLC fingerprints for R.quadrifida samples was established.     

Reversible control of free energy and topography of nanostructured surfaces

We describe a facile method for the formation of dynamic nanostructured surfaces based on the modification of porous anodic aluminum oxide with poly(N-isopropyl acrylamide) (PNIPAAm) via surface-initiated atom transfer radical polymerization. The dynamic structure of these surfaces was investigated by atomic force microscopy (AFM), which showed dramatic changes in the surface nanostructure above and below the aqueous lower critical solution temperature of PNIPAAm. These changes in surface structure are correlated with changes in the macroscopic wettability of the surfaces, which was probed by water contact angle measurements. Principal component analysis was used to develop a quantitative correlation between AFM image intensity histograms and macroscopic wettability. Such correlations and dynamic nanostructured surfaces may have a variety of uses.     

Polynomial Time Approximation Scheme for Two Parallel Machines Scheduling with a Common Due Date to Maximize Early Work

We study the scheduling problem with a common due date on two parallel identical machines and the total early work criterion. The problem is known to be NP-hard. We prove a few dominance properties of optimal solutions of this problem. Their proposal was inspired by the results of some auxiliary computational experiments. Test were performed with the dynamic programming algorithm and list algorithms. Then, we propose the polynomial time approximation scheme, based on structuring problem input. Moreover, we discuss the relationship between the early work criterion and the related late work criterion. We compare the computational complexity and approximability of scheduling problems with both mentioned objective functions.     

Synthesis of α-CF3- and α-CCl3 substituted nitrogen heterocycles by aza Diels-Alder and cyclocondensation reactions

Convenient synthetic approaches for α-CF₃- and α-CCl₃ substituted pyridines, hydrogenated pyridines, azanorbornenes, 4H-1,2,4-thiadiazine- and 2H-1,2,6-thiadiazine-1,1-dioxides were developed on the basis of cycloaddition and cyclocondensation reactions of trihaloethaneimines and imidoyl chlorides.     

Multiple Andreev reflections as a transport problem in energy space

We present an approach for analysing the dc current in voltage biased quantum superconducting junctions. By separating terms from different n -particle processes, we find that the n -particle current can be mapped on the problem of wave transport through a potential structure with n barriers. We discuss the relation between resonances in such structures and the subgap structures in the current–voltage characteristics. At zero temperature we find, exactly, that only processes creating real excitations contribute to the current. Our results are valid for a general SXS junction, where the X region is an arbitrary nonsuperconducting region described by an energy-dependent transfer matrix.     

Unravelling free volume in branched-cation ionic liquids based on silicon

The branching of ionic liquid cation sidechains utilizing silicon as the backbone was explored and it was found that this structural feature leads to fluids with remarkably low density and viscosity. The relatively low liquid densities suggest a large free volume in these liquids. Argon solubility was measured using a precise saturation method to probe the relative free volumes. Argon molar solubilities were slightly higher in ionic liquids with alkylsilane and siloxane groups within the cation, compared to carbon-based branched groups. The anion size, however, showed by far the dominant effect on argon solubility. Thermodynamic solvation parameters were derived from the solubility data and the argon solvation environment was modelled utilizing the polarizable CL&Pol force field. Semiquantitative analysis was in agreement with trends established from the experimental data. The results of this investigation demonstrate design principles for targeted ionic liquids when optimisation for the free volume is required, and demonstrate the utility of argon as a simple, noninteracting probe. As more ionic liquids find their way into industrial processes of scale, these findings are important for their utilisation in the capture of any gaseous solute, gas separation, or in processes involving the transformation of gases or small molecules.

The branching of ionic liquid cation sidechains utilizing silicon as the backbone was explored and it was found that this structural feature leads to fluids with remarkably low density and viscosity.