Cellulose-based materials as scaffolds for tissue engineering

Two types of cellulose-based materials, 6-carboxycellulose with 2.1 or 6.6 wt% of –COOH groups, were prepared and tested for potential use in tissue engineering. The materials were functionalized with arginine, i.e. an amino acid with a basic side chain, or with chitosan, in order to balance the relatively acid character of oxidized cellulose molecules, and were seeded with vascular smooth muscle cells (VSMC). The cell adhesion and growth were then evaluated directly on the materials, and also on the underlying polystyrene culture dishes. Of these two types of studied materials, 6-carboxycellulose with 2.1 wt% of –COOH groups was more appropriate for cell colonization. The cells on this material achieved an elongated shape, while they were spherical in shape on the other materials. The number of cells and the concentration (per mg of protein) of contractile proteins alpha-actin and SM1 and SM2 myosins, i.e. markers of the phenotypic maturation of VSMC, were also significantly higher on this material. Functionalization of the material with arginine and chitosan further improved the phenotypic maturation of VSMC. Chitosan also improved the adhesion and growth of these cells. In comparison with the control polystyrene dishes, the proliferation of cells on our cellulose-based materials was relatively low. This suggests that these materials can be used in applications where high proliferation activity of cells is not desirable, e.g. proliferation of VSMC on vascular prostheses. Alternatively, the cell proliferation might be enhanced by another more efficient modification, which would require further research.     

Reaction Kinetics and Reduced Shrinkage Stress of Thiol-Yne-Methacrylate and Thiol-Yne-Acrylate Ternary Systems

Thiol-yne-methacrylate and thiol-yne-acrylate ternary systems were investigated for polymerization kinetics and material properties and compared to the analogous pure thiol-yne and (meth)acrylate systems. Both thiol-yne-methacrylate and thiol-yne-acrylate systems were demonstrated to reduce polymerization induced shrinkage stress while simultaneously achieving high glass transition temperatures (T(g)) and modulius. Formulations with 70 wt% methacrylate increased the T(g) from 51 ± 2 to 75 ± 1 °C and the modulus from 1800 ± 100 to 3200 ± 400 MPa (44% increase) over the pure thiol-yne system. Additionally, the shrinkage stress was 1.2 ± 0.2 MPa, which is lower than that of the pure methacrylate, binary thiol-yne and thiol-ene-methacrylate control systems which are all > 2 MPa. Interestingly, with increasing methacrylate or acrylate concentration, a decrease and subsequent increase in the shrinkage stress values were observed. A minimum shrinkage stress value (1.0 ± 0.2 MPa) was observed in the 50 wt% methacrylate and 70 wt% acrylate systems. This tunable behavior results from the competitive reaction kinetics of the methacrylate or acrylate homopolymerization versus chain transfer to thiol and the accompanying thiol-yne step-growth polymerization. The crosslinking density of the networks and the amount of volumetric shrinkage that occurs prior to gelation relative to the total volumetric shrinkage were determined as two key factors that control the final shrinkage stress of the ternary systems.     

Contact mechanics of nanometer-scale molecular contacts: correlation between adhesion, friction, and hydrogen bond thermodynamics

Using a scanning force microscope, adhesion forces have been measured between carboxylic acid terminated self-assembled monolayers in different nonpolar solvents or in two-component liquid mixtures consisting of a polar solvent (ethyl acetate or acetone) in heptane. The adhesion forces measured in pure acetone and ethyl acetate were small (0.24 nN) but increased logarithmically as the concentration of the polar solvent decreased to reach a maximum value (2.77 nN), equal to that measured in pure heptane, and for lower concentrations of polar solvent, the adhesion force remained constant. This behavior is identical to that observed for association constants measured for the formation of 1:1 H-bonded complexes between dilute solutes in solvent mixtures. The transition between the solvent-dependent and -independent regimes occurs at a polar solvent concentration corresponding to 1/K(S), where K(S) is the equilibrium constant for solvation of a carboxylic acid by the polar solvent in heptane. A simple model, in which the solvation of the carboxylic acid groups may be estimated by considering the concentration and polarity of functional groups in the liquid, accurately predicts values of K(S) that were found to correlate very well with the observed solvent-dependence of the adhesion force. Friction-load relationships were measured using friction-force microscopy. In pure acetone and ethyl acetate, a linear friction-load relationship was observed, in agreement with Amontons' law. However, as the concentration of polar solvent was reduced, a nonlinear relationship was observed and the friction-load relationship was found to fit the Derjaguin-Müller-Toporov (DMT) model for single asperity contacts. For pure heptane and a range of other nonpolar liquids with identical dielectric constants, the friction-load relationship was described by DMT mechanics. Exceptionally, for perfluorodecalin, Johnson-Kendall-Roberts mechanics was observed. These observations may be rationalized by treating the friction force as the sum of load-dependent and shear contributions. Under conditions of low adhesion, where the carboxylic acid surface is solvated by polar solvent molecules, the shear term is negligible and the sliding interaction is dominated by load-dependent friction. As the degree of solvation of the carboxylic acid groups decreases and the adhesion force increases, the shear friction contribution increases, dominating the interaction for media in which the adhesion force is greater than ca. 0.6 nN.     

Permeability of anti-fouling PEGylated surfaces probed by fluorescence correlation spectroscopy

The present work reports on in situ observations of the interaction of organic dye probe molecules and dye-labeled protein with different poly(ethylene glycol) (PEG) architectures (linear, dendron, and bottle brush). Fluorescence correlation spectroscopy (FCS) and single molecule event analysis were used to examine the nature and extent of probe-PEG interactions. The data support a sieve-like model in which size-exclusion principles determine the extent of probe-PEG interactions. Small probes are trapped by more dense PEG architectures and large probes interact more with less dense PEG surfaces. These results, and the tunable pore structure of the PEG dendrons employed in this work, suggest the viability of electrochemically-active materials for tunable surfaces.     

DMSO-enhanced MALDI MS imaging with normalization against a deuterated standard for relative quantification of dasatinib in serial mouse pharmacology studies

Matrix-assisted laser desorption/ionization mass spectrometry imaging is an emerging powerful technique in drug metabolism and pharmacokinetics research. Despite recent progress in mass-spectrometry-based localization and relative quantification of small-molecule drugs and their metabolites in tissue, improved methods for drug extraction/ionization are required. Furthermore, relative quantification of drugs by mass spectrometry imaging in larger rodent cohorts is a necessary proof-of-concept study to demonstrate the utility of such a workflow in an industrial setting. Using as an example the tyrosine kinase inhibitor dasatinib, a leukemia drug, we demonstrate that inclusion of dimethyl sulfoxide in standard matrix solutions significantly improves ion intensity in mass spectrometry images and reveals enrichment of the drug in mouse kidney medulla. We furthermore show in a time-course study in multiple mice that normalization against a deuterated internal standard, dasatinib-D ₈, which is applied together with the matrix, makes possible relative quantification of the drug that correlates well with canonical liquid chromatography–tandem mass spectrometry based drug quantification.     

A Magnetically Drivable Nanovehicle for Curcumin with Antioxidant Capacity and MRI Relaxation Properties

Curcumin possesses wide‐ranging anti‐inflammatory and anti‐cancer properties and its biological activity can be linked to its potent antioxidant capacity. Superparamagnetic maghemite (γ‐Fe₂O₃), called surface‐active maghemite nanoparticles (SAMNs) were surface‐modified with curcumin molecules, due to the presence of under‐coordinated Fe^III atoms on the nanoparticle surface. The so‐obtained curcumin‐modified SAMNs (SAMN@curcumin) had a mean size of 13±4 nm. SAMN@curcumin was characterized by transmission and scanning electron microscopy, UV/Vis, FTIR, and Mössbauer spectroscopy, X‐ray powder diffraction, bulk susceptibility (SQUID), and relaxometry measurements (MRI imaging). The high negative contrast proclivity of SAMN@curcumin to act as potential contrast agent in MRI screenings was also tested. Moreover, the redox properties of bound curcumin were probed by electrochemistry. SAMN@curcumin was studied in the presence of different electroactive molecules, namely hydroquinone, NADH and ferrocyanide, to assess its redox behavior. Finally, SAMN@curcumin was electrochemically probed in the presence of hydrogen peroxide, demonstrating the stability and reactivity of bound curcumin.     

Surface modification of oxidized cellulose haemostat by argon plasma treatment

In this paper we focused on cold plasma treatment of oxidized cellulose haemostat. Oxidized cellulose was modified in inert argon plasma. The changes of surface composition were examined by XPS and FTIR. Surface morphology of fibres was studied by SEM. Gravimetry was used to study ablation and water absorption. Antibacterial effect of pristine and plasma treated samples was examined by growth of Escherichia coli and Staphylococcus epidermidis. Behaviour of pristine and plasma treated samples in water, physiological saline solution and phosphate buffered saline was observed by changes in the pH of their solutions. Modification of oxidized cellulose by inert argon plasma caused significant changes in the chemical composition of its surface layers as well as changes in morphology of those layers while maintaining or improving the antibacterial properties. We found out that modification by inert argon plasma improves the properties necessary for haemostatic function of oxidized cellulose.     

OR and the management of electronic services

This review paper is meant to provide some insight to the relation between operations research and the management of electronic services. We use the term electronic services, within the broader e-business context, to refer to any service that is delivered to the customer via electronic means, mainly the Internet as a new channel to communicate with customers, but also through mobile and other digital communications. During the last years we have experienced an explosion in the development of electronic services, which is creating abundant opportunities for operations research (OR) applications, required to empower several types of technology-mediated interactions, exploit the large-scale digital data sources, and automate the recurring operational decisions. In this paper we summarise the various aspects in which operations research may support the management of electronic services, taking into account the different characteristics of alternative electronic media, such as the Internet, mobile communications, interactive television etc.