Evidence for dark energy from the cosmic microwave background alone using the Atacama Cosmology Telescope lensing measurements

For the first time, measurements of the cosmic microwave background radiation (CMB) alone favor cosmologies with w = -1 dark energy over models without dark energy at a 3.2-sigma level. We demonstrate this by combining the CMB lensing deflection power spectrum from the Atacama Cosmology Telescope with temperature and polarization power spectra from the Wilkinson Microwave Anisotropy Probe. The lensing data break the geometric degeneracy of different cosmological models with similar CMB temperature power spectra. Our CMB-only measurement of the dark energy density Ω(Λ) confirms other measurements from supernovae, galaxy clusters, and baryon acoustic oscillations, and demonstrates the power of CMB lensing as a new cosmological tool.     

Carbon Dioxide to Methanol: The Aqueous Catalytic Way at Room Temperature

Carbon dioxide may constitute a source of chemicals and fuels if efficient and renewable processes are developed that directly utilize it as feedstock. Two of its reduction products are formic acid and methanol, which have also been proposed as liquid organic chemical carriers in sustainable hydrogen storage. Here we report that both the hydrogenation of carbon dioxide to formic acid and the disproportionation of formic acid into methanol can be realized at ambient temperature and in aqueous, acidic solution, with an iridium catalyst. The formic acid yield is maximized in water without additives, while acidification results in complete (98 %) and selective (96 %) formic acid disproportionation into methanol. These promising features in combination with the low reaction temperatures and the absence of organic solvents and additives are relevant for a sustainable hydrogen/methanol economy.     

An approach to optimize the design of microfluidic chips for electrophoretic separations

The precise design and operational control of the separation process of liquid matrices is key to the performance of on-chip liquid analysis. Present research attempts from the engineering point of view to investigate of the process occurring in the microfluidic channels for chip design with the best separation efficiency. An one-dimensional model of electrokinetic sample motion was developed to simulate the separation process of sample containing amino acids (tryptophan, tyrosine, proline, methionine) that migrate in a buffer solution through a straight separation channel made of poly(methyl methacrylate) within a microfluidic chip under different conditions. On the basis of the simulations by the finite-difference method the effects of the channel size, the chip material, the applied voltage difference and the test solution pH on separation rate are discussed. It was found that for the channel length of 2 cm the resolution of peaks is optimal and the fastest time of amino acids separation is 4 s.     

Rheological representation of fractional order viscoelastic material models

We develop rheological representations, i.e., discrete spectrum models, for the fractional derivative viscoelastic element (fractional dashpot or springpot). Our representations are generalized Maxwell models or series of Kelvin-Voigt units, which, however, maintain the number of parameters of the corresponding fractional order model. Accordingly, the number of parameters of the rheological representation is independent of the number of rheological units. We prove that the representations converge to the corresponding fractional model in the limit as the number of units tends to infinity. The representations extend to compound fractional derivative models such as the fractional Maxwell model, fractional Kelvin-Voigt model, and fractional standard linear solid. Computational experiments show that the rheological representations are accurate approximations of the fractional order models even for a small number of units.     

The Chemical Composition of Oils and Cakes of Ochna serrulata (Ochnaceae) and Other Underutilized Traditional Oil Trees from Western Zambia

Currently, the negative effects of unified and intensive agriculture are of growing concern. To mitigate them, the possibilities of using local but nowadays underused crop for food production should be more thoroughly investigated and promoted. The soybean is the major crop cultivated for vegetable oil production in Zambia, while the oil production from local oil-bearing plants is neglected. The chemical composition of oils and cakes of a three traditional oil plant used by descendants of the Lozi people for cooking were investigated. Parinari curatellifolia and Schinziophyton rautanenii oils were chiefly composed of α-eleostearic (28.58–55.96%), linoleic (9.78–40.18%), and oleic acid (15.26–24.07%), whereas Ochna serrulata contained mainly palmitic (35.62–37.31%), oleic (37.31–46.80%), and linoleic acid (10.61–18.66%); the oil yield was high (39–71%). S. rautanenii and O. serrulata oils were rich in γ-tocopherol (3236.18 μg/g, 361.11 μg/g, respectively). The O. serrulata oil also had a very distinctive aroma predominantly composed of p-cymene (52.26%), m-xylene (9.63%), γ-terpinene (9.07%), o-xylene (7.97), and limonene (7.23%). The cakes remaining after oil extraction are a good source of essential minerals, being rich in N, P, S, K, Ca, and Mg. These plants have the potential to be introduced for use in the food, technical, or pharmaceutical industries.     

Synthesis of Composite Polystyrene/Silica Nanoparticles via Precipitation and Emulsion Polymerization Methods

Polystyrene/silica composite nanoparticles were synthesized via precipitation and emulsion polymerization methods, in the presence of a basic co‐monomer (e.g., 4‐VP and 1‐VID), and a colloidal aqueous silica solution. The effects of key process parameters, that is, solvent type, monomer/co‐monomer volume ratio and total monomers concentration for precipitation polymerization, and reaction temperature, pH value, initial silica‐sol concentration and initial monomer/co‐monomer molar ratio for emulsifier‐free emulsion polymerization on the particle morphology, silica content, and particle size distribution of the composite nanoparticles were experimentally investigated. Stable, spherical, and uniform in size composite nanoparticles were synthesized by both techniques. The average particle diameter varied from 108 to 182 nm for the emulsifier‐free emulsion polymerization and from 400 to 800 nm for the precipitation polymerization, while the silica content was as high as 38.3 wt.‐% for the former method and up to 15.5 wt.‐% for the later. The synthesized composite polymer/silica particles were then electrolytically co‐deposited with zinc on steel plates to improve the corrosion resistance of the metal's surface.

     

Direct Evidence for the Polymeric Nature of Polydopamine

Inspired by the adhesive proteins of mussels, polydopamine (pDA) has emerged as one of the most widely employed materials for surface functionalization. Despite numerous attempts at characterization, little consensus has emerged regarding whether pDA is a covalent polymer or a noncovalent aggregate of low molecular weight species. Here, we employed single‐molecule force spectroscopy (SMFS) to characterize pDA films. Retraction of a pDA‐coated cantilever from an oxide surface shows the characteristic features of a polymer with contour lengths of up to 200 nm. pDA polymers are generally weakly bound to the surface through much of their contour length, with occasional “sticky” points. Our findings represent the first direct evidence for the polymeric nature of pDA and provide a foundation upon which to better understand and tailor its physicochemical properties.     

Effect of gamma irradiation on antiradical activity of goji berry fruits (Lycium barbarum) evaluated by EPR spectroscopy

Antiradical activity of goji berry (Lycium barbarum) was evaluated by means of electron paramagnetic resonance spectroscopy. The goji berry samples were exposed to gamma-irradiation at doses 0.05, 2 and 10 kGy. The characteristic satellite lines from cellulose radicals can prove irradiation treatment. Their intensity increase after alcohol washing and lyophilization. The fading property of satellite lines show that identification of radiation treatment is possible for 50 days. The effect of irradiation on antiradical properties of goji berry extracts was investigated by radical scavenging activity using the stable free radical 1,1-diphenyl-2-picrylhydrazyl (DPPH). The percentages of scavenged DPPH radicals and IC₅₀ of the extracts of goji berry before and after irradiation were calculated. The antioxidant capacity was presented in Trolox Equivalents as well. It was found out that gamma irradiation of goji berry fruits increases its antiradical activity.

     

U(VI) adsorption by biochar fiber–MnO2 composites

The removal of U(VI) by biochar fibers from aqueous solutions has been investigated prior and after MnO₂ surface-deposition. The removal efficiency has been studied as a function of pH, U(VI) concentration, ionic strength, temperature and contact time. The fibers morphology and surface complexes were analyzed by SEM–EDX and FTIR, respectively. Evaluation of the experimental data indicates that the composite presents extraordinary adsorption capacity (q_max = 3.8 mmol g⁻¹, 904 mg g⁻¹), which is attributed to the formation of inner-sphere surface complexes, and that the adsorption reaction is a relatively fast, endothermic and entropy-driven process.

     

Bioinspired Design Provides High‐Strength Benzoxazine Structural Adhesives

A synthetic strategy to incorporate catechol functional groups into benzoxazine thermoset monomers was developed, leading to a family of bioinspired small‐molecule resins and main‐chain polybenzoxazines derived from biologically available phenols. Lap‐shear adhesive testing revealed a polybenzoxazine derivative with greater than 5 times improved shear strength on aluminum substrates compared to a widely studied commercial benzoxazine resin. Derivative synthesis identified the catechol moiety as an important design feature in the adhesive performance and curing behavior of this bioinspired thermoset. Favorable mechanical properties comparable to commercial resin were maintained, and glass transition temperature and char yield under nitrogen were improved. Blending of monomers with bioinspired main‐chain polybenzoxazine derivatives provided formulations with enhanced shear adhesive strengths up to 16 MPa, while alloying with commercial core–shell particle‐toughened epoxy resins led to shear strengths exceeding 20 MPa. These results highlight the utility of bioinspired design and the use of biomolecules in the preparation of high‐performance thermoset resins and adhesives with potential utility in transportation and aerospace industries and applications in advanced composites synthesis.