Lead Assays with Smartphone Detection Using a Monolithic Rod with 4-(2-Pyridylazo) Resorcinol

A monolithic rod of polyurethane foam–[4-(2-pyridylazo) resorcinol] (PUF–PAR) as a simple chemical sensor for lead assays with smartphone detection and image processing was developed. With readily available simple apparatus such as a plastic cup and a stirrer rod, the monolithic PUF rod was synthesized in a glass tube. The monolithic PUF–PAR rod could be directly loaded by standard/sample solution without sample preparation. A one-shot image in G/B value from a profile plot in ImageJ for a sample with triplicate results via a single standard calibration approach was obtained. A linear single standard calibration was: [G/B value] = −0.038[µg Pb²⁺] + 2.827, R² = 0.95 for 10–30 µg Pb²⁺ with a limit of quantitation (LOQ) of 33 µg L⁻¹. The precision was lower than 15% RSD. The proposed method was tested by an assay for Pb²⁺ contents in drinking water samples from Bangkok. The results obtained by the proposed method agree with those of ICP-OES and with 100–120% recovery, demonstrating that the method is useful for screening on-site water monitoring.     

A Simple Minimized System Based on Moving Drops for Antioxidant Analysis Using a Smartphone

In this paper, a novel antioxidant analysis is proposed using a simple minimized device based on moving drops as solution handling and a smartphone as a detector. This approach is based on the colorimetric determination of the scavenging activity against 2,2-diphenyl-1-picrylhydrazyl radical (DPPH^•), expressed as the half-maximal inhibitory concentration (IC₅₀), vitamin C equivalent antioxidant capacity (VCEAC), and Trolox equivalent antioxidant capacity (TEAC). A small drop of the positive control or the samples moves by eluting an ethanol drop down by the force of gravity to react with a DPPH^• drop in the detection zone. The color change of DPPH^• is monitored by a smartphone camera, and the color signals are processed using Adobe Photoshop software. The magenta-to-yellow ratio was successfully applied to evaluate the percentage of DPPH^• inhibition with no significant difference compared with the reference spectrophotometric method at a confidence level of 95%. The total phenolic content (TPC) was measured using the Folin–Ciocalteu assay. An application to Miang (fermented tea leaf extract) showed the consonant relationship between the scavenging activity of DPPH^• and TPC.     

The Effects of Streptozotocin-Induced Diabetes and Insulin Treatment on Carnitine Biosynthesis and Renal Excretion

Carnitine insufficiency is reported in type 1 diabetes mellitus. To determine whether this is accompanied by defects in biosynthesis and/or renal uptake, liver and kidney were obtained from male Sprague-Dawley rats with streptozotocin-induced diabetes. Diabetic rats exhibited the metabolic consequences of type 1 diabetes, including hypoinsulinemia, hyperglycemia, and increased urine output. Systemic hypocarnitinemia, expressed as free carnitine levels, was evident in the plasma, liver, and kidney of diabetic rats. Compared to control rats, the low free carnitine in the plasma of diabetic rats was accompanied by decreased expression of γ-butyrobetaine hydroxylase in liver and kidney, suggesting impaired carnitine biosynthesis. Expression of organic cation transporter-2 in kidney was also reduced, indicating impaired renal reabsorption, and confirmed by the presence of elevated levels of free carnitine in the urine of diabetic rats. Insulin treatment of diabetic rats reversed the plasma hypocarnitinemia, increased the free carnitine content in both kidney and liver, and prevented urinary losses of free carnitine. This was associated with increased expression of γ-butyrobetaine hydroxylase and organic cation transporter-2. The results of our study indicate that type 1 diabetes induced with streptozotocin disrupts carnitine biosynthesis and renal uptake mechanisms, leading to carnitine insufficiency. These aberrations in carnitine homeostasis are prevented with daily insulin treatment.     

An improved in vivo deuterium labeling method for measuring the biosynthetic rate of cytokinins

An improved method for determining the relative biosynthetic rate of isoprenoid cytokinins has been developed. A set of 11 relevant isoprenoid cytokinins, including zeatin isomers, was separated by ultra performance liquid chromatography in less than 6 min. The iP-type cytokinins were observed to give rise to a previously-unknown fragment at m/z 69; we suggest that the diagnostic (204-69) transition can be used to monitor the biosynthetic rate of isopentenyladenine. Furthermore, we found that by treating the cytokinin nucleotides with alkaline phosphatase prior to analysis, the sensitivity of the detection process could be increased. In addition, derivatization (propionylation) improved the ESI-MS response by increasing the analytes' hydrophobicity. Indeed, the ESI-MS response of propionylated isopentenyladenosine was about 34% higher than that of its underivatized counterpart. Moreover, the response of the derivatized zeatin ribosides was about 75% higher than that of underivatized zeatin ribosides. Finally, we created a web-based calculator (IZOTOP) that facilitates MS/MS data processing and offer it freely to the research community.     

A Simple Contactless Conductivity Detector Employing a Medium Wave Radio Integrated Circuit for the Signal Treatment

A new procedure has been tested for the treatment of the alternating signal coming from a contactless conductivity detection cell. The cell consists of a polyethylene (2 mm o.d., 1.5 mm i.d.) or polytetrafluoroethylene (1.6 mm o.d., 0.8 mm i.d.) tubing, with 5 mm wide tubular electrodes placed over the tubing and separated by a 5 mm gap. An unmodulated or an amplitude‐modulated AC voltage is applied to the cell and the AC current passing through the cell is treated by a TDA 1072A integrated circuit, obtaining a signal depending on the conductivity of the quiescent or flowing solution inside the cell. Under optimized conditions, the solution conductance can be measured within a range from ca. 10 to 700 μS cm^?1, corresponding to ca. 9×10^?5 to 5×10^?3 M KCl. The detector was used to measure the conductivities of various drinking waters and the values obtained were in a good agreement with those provided by a commercial contact conductometer. It has been found that the use of unmodulated input voltage is advantageous both experimentally, and from the point of view of the quality of the analytical characteristics. The integrated circuit tested is not, however, sufficiently sensitive for application to capillary detection cells with diameters of a few tens of μm, employed in microseparation procedures.     

Combined effects of mobile phase composition and temperature on the retention of homologous and polar test compounds on polydentate C8 column

Combined effects of temperature and mobile phase on the reversed phase chromatographic behavior of alkylbenzenes and simple substituted benzenes were investigated on a Blaze C₈ polydentate silica-based column, showing improved resistance against hydrolytic breakdown at temperatures higher than 60 °C, in comparison to silica-based stationary phases with single attachment sites. For better insight into the retention mechanism on polydentate columns, we determined the enthalpy and entropy of the transfer of the test compounds from the mobile to the stationary phase. The enthalpic contribution dominated the retention at 80% or lower concentrations of methanol in the mobile phase. Entropic effects are more significant in 90% methanol and in acetonitrile–water mobile phases. Anomalies in the effects of mobile phase on the enthalpy of retention of benzene, methylbenzene and polar benzene derivatives were observed, in comparison to regular change in enthalpy and entropy of adsorption with changing concentration of organic solvent and the alkyl length for higher alkylbenzenes. The temperature and the mobile phase effects on the retention are practically independent of each other and – to first approximation – can be described by a simple model equation, which can be used for optimization of separation conditions.     

Doped soap membranes selectively permeate a chiral isomer

Soap films can not only be made with sub-μm thickness, they can have intrinsic permeabilities comparable to many commercial membranes, permitting very high transmembrane flux. Soap films readily incorporate a wide range of modifiers to allow highly tailored selectivity: We show that incorporating α-cyclodextrin in an 890 nm thick Triton-X-100 film allows, in a single stage, a high degree of chirally selective transport (1.6:1) of α(+)-pinene over α(-)-pinene.     

Correlation of acoustic and optical emission signals produced at 1064 and 532 nm laser-induced breakdown spectroscopy (LIBS) of glazed wall tiles

An acoustic signal was used for the internal standardization of laser-induced breakdown spectroscopy (LIBS) of a glazed wall tile. For the LIBS analyses, 1064 nm and 532 nm wavelengths of the Nd:YAG laser were utilized. The tile was depth profiled by a single-spot ablation from the glaze into the substrate. Some lines of major elements Si(I) 252.418, Si(I) 252.851, Al(I) 257.509, Cr(I) 295.368, Al(I) 309.271 nm and Ti(II) 334.904 nm were monitored. The decrease in the optical emissions during the ablation was successfully compensated for by normalization to the square power of the acoustic signal in the interval of 290–340 nm. This approach failed for the lines between 250–270 nm. The results were the same for both lasing wavelengths despite different irradiances. The acquired profiles are in good agreement with the reference X-ray fluorescence measurement.