Synthesis of polypyrrole nanoparticles by batch and semicontinuous heterophase polymerizations

Nanoparticles of semiconducting polypyrrole (PPy) were synthesized by batch heterophase (BHP) and semicontinuous heterophase polymerization (SHP) using ferric chloride (FeCl₃), potassium persulfate (KPS), or ammonium persulfate (APS) as the oxidizing agent, sodium dodecyl sulfate (SDS) as surfactant, and ethanol (EtOH) or iso-pentyl alcohol (iC₅OH) as co-surfactants. In all cases, the molar ratios of monomer/oxidizing agent were 1/1. Pyrrol polymerization by BHP and SHP allowed using much lower percentages of surfactant than those employed in microemulsion polymerization of this monomer. The effects of temperature, oxidizing agent, and co-surfactant on conductivity were studied. The polymers were analyzed by transmission electron microscopy (TEM), UV/Visible and Fourier transform infrared (FTIR) spectroscopies, and cyclic voltammetry. Higher PPy conductivities were obtained by polymerizing at 0 °C with FeCl₃ as the oxidizing agent, in the presence of iC₅OH as co-surfactant. When the reaction was carried out by SHP with low reaction times, smaller particles with similar conductivities were obtained compared to those obtained by BHP; the conductivity of PPy decreases with increasing polymerization time, which can be explained by PPy overoxidation.     

Analysis of the Lipidome of Xenografts Using MALDI-IMS and UHPLC-ESI-QTOF

Human tumor xenografts in immunodeficient mice are a very popular model to study the development of cancer and to test new drug candidates. Among the parameters analyzed are the variations in the lipid composition, as they are good indicators of changes in the cellular metabolism. Here, we present a study on the distribution of lipids in xenografts of NCI-H1975 human lung cancer cells, using MALDI imaging mass spectrometry and UHPLC-ESI-QTOF. The identification of lipids directly from the tissue by MALDI was aided by the comparison with identification using ESI ionization in lipid extracts from the same xenografts. Lipids belonging to PCs, PIs, SMs, DAG, TAG, PS, PA, and PG classes were identified and their distribution over the xenograft was determined. Three areas were identified in the xenograft, corresponding to cells in different metabolic stages and to a layer of adipose tissue that covers the xenograft.

Pt supported on carbon nanofibers as electrocatalyst for low temperature polymer electrolyte membrane fuel cells

Carbon nanofibers synthesized via the thermo catalytic decomposition of methane were investigated for the first time as an electrocatalyst support in PEMFC cathodes. Their textural and physical properties make them a highly efficient catalyst support for cathodic oxygen reduction in low temperature PEMFC. Tests performed in MEAs showed that Pt supported on carbon nanofibers exhibited an enhancement of ca. 94% in power density at 0.600 V, in comparison with a commercial catalyst supported on conventional carbon black, Pt/Vulcan XC-72R.     

Diastereoselective multicomponent Amine-Aldehyde-Dienophile (AAD) process for the synthesis of polysubstituted cyclohex-2-enylamines

The multicomponent Amine-Aldehyde-Dienophile reaction is optimized employing benzyl or 4-methoxybenzylamine. The interest of the transformation consist in the synthesis of polysubstituted cyclohex-2-enylamines. The study of the scope of this AAD process is carried out, as well as the diastereoselective version, employing commercially available chiral benzylic amines and a maleimide with the chiral information at the N-substituent. VCD spectroscopy is a very useful tool for the determination of the absolute configuration of the isolated enantiomerically enriched compounds.     

Electrochemical and photochemical approaches for the synthesis of the C28–C38 fragment of okadaic acid

Okadaic acid, a potent and selective inhibitor of Protein Phosphatases 1 and 2A (PP1 and PP2A), is widely used as a probe for various biochemical processes. We describe herein two innovative methods for the synthesis of the terminal C28–C38 fragment of the natural polyether. Suárez photochemical oxidative cyclization and electrochemical oxidation of malonates to their ketals equivalents have been successfully applied for the assembly of the key spiroketal core.     

Ferrocenyl‐Ended Thieno–Vinylene Oligomers: Donor–Acceptor Polarization and Mixed‐Valence Properties with Emphasis on the Raman Mapping of Localized‐to‐Delocalized Transitions

What's your role? New oligothiophene–vinylene compounds have been synthesized to study the role of the conjugated chain in two different cases (see scheme; MV=mixed valence). The electronic and molecular structures were analyzed by means of electronic, X‐ray photoelectron, and Raman spectroscopy, together with thermo spectroscopy, electrochemistry, and DFT calculations.

     

“Helter‐Skelter‐Like” Perylene Polyisocyanopeptides

Exciton migration! Spectroscopic analyses and extensive molecular dynamics studies revealed a well‐defined 4₁ helix in which the perylene molecules (see figure) form four “helter‐skelter‐like” overlapping pathways along which excitons and electrons can rapidly migrate.

     

Structural Analysis of Zincocenes with Substituted Cyclopentadienyl Rings

New zincocenes [ZnCp′₂] ( 2 – 5 ) with substituted cyclopentadienyl ligands C₅Me₄H, C₅Me₄tBu, C₅Me₄SiMe₂tBu and C₅Me₄SiMe₃, respectively, have been prepared by the reaction of ZnCl₂ with the appropriate Cp′‐transfer reagent. For a comparative structural study, the known [Zn(C₅H₄SiMe₃)₂] ( 1 ), has also been investigated, along with the mixed‐ring zincocenes [Zn(C₅Me₅)(C₅Me₄SiMe₃)] ( 6 ) and [Zn(C₅Me₅)(C₅H₄SiMe₃)] ( 7 ), the last two obtained by conproportionation of [Zn(C₅Me₅)₂] with 5 or 1 , as appropriate. All new compounds were characterised by NMR spectroscopy, and by X‐ray methods, with the exception of 7 , which yields a side‐product ( C ) upon attempted crystallisation. Compounds 5 and 6 were also investigated by ¹³C CPMAS NMR spectroscopy. Zincocenes 1 and 2 have infinite chain structures with bridging Cp′ ligands, while 3 and 4 exhibit slipped‐sandwich geometries. Compounds 5 and 6 have rigid, η⁵/η¹(σ) structures, in which the monohapto C₅Me₄SiMe₃ ligand is bound to zinc through the silyl‐bearing carbon atom, forming a Zn? C bond of comparable strength to the Zn? Me bond in ZnMe₂. Zincocene 5 has dynamic behaviour in solution, but a rigid η⁵/η¹(σ) structure in the solid state, as revealed by ¹³C CPMAS NMR studies, whereas for 6 the different nature of the Cp′ ligands and of the ring substituents of the η¹‐Cp′ group (Me and SiMe₃) have permitted observation for the first time of the rigid η⁵/η¹ solution structure. Iminoacyl compounds of composition [Zn(η⁵‐C₅Me₄R)(η¹‐C(NXyl)C₅Me₄R)] resulting from the reactions of some of the above zincocenes and CNXyl (Xyl=2,6‐dimethylphenylisocyanide) have also been obtained and characterised.     

Dihydroxyacetone Phosphate Aldolase Catalyzed Synthesis of Structurally Diverse Polyhydroxylated Pyrrolidine Derivatives and Evaluation of their Glycosidase Inhibitory Properties

The chemoenzymatic synthesis of a collection of pyrrolidine‐type iminosugars generated by the aldol addition of dihydroxyacetone phosphate (DHAP) to C‐α‐substituted N‐Cbz‐2‐aminoaldehydes derivatives, catalyzed by DHAP aldolases is reported. L ‐Fuculose‐1‐phosphate aldolase (FucA) and L ‐rhamnulose‐1‐phosphate aldolase (RhuA) from E. coli were used as biocatalysts to generate configurational diversity on the iminosugars. Alkyl linear substitutions at C‐α were well tolerated by FucA catalyst (i.e., 40–70 % conversions to aldol adduct), whereas no product was observed with C‐α‐alkyl branched substitutions, except for dimethyl and benzyl substitutions (20 %). RhuA was the most versatile biocatalyst: C‐α‐alkyl linear groups gave the highest conversions to aldol adducts (60–99 %), while the C‐α‐alkyl branched ones gave moderate to good conversions (50–80 %), with the exception of dimethyl and benzyl substituents (20 %). FucA was the most stereoselective biocatalyst (90–100 % anti (3R,4R) adduct). RhuA was highly stereoselective with (S)‐N‐Cbz‐2‐aminoaldehydes (90–100 % syn (i.e., 3R,4S) adduct), whereas those with R configuration gave mixtures of anti/syn adducts. For iPr and iBu substituents, RhuA furnished the anti adduct (i.e., FucA stereochemistry) with high stereoselectivity. Molecular models of aldol products with iPr and iBu substituents and as complexes with the RhuA active site suggest that the anti adducts could be kinetically preferred, while the syn adducts would be the equilibrium products. The polyhydroxylated pyrrolidines generated were tested as inhibitors against seven glycosidases. Among them, good inhibitors of α‐L ‐fucosidase (IC₅₀=1–20 μM ), moderate of α‐L ‐rhamnosidase (IC₅₀=7–150 μM ), and weak of α‐D ‐mannosidase (IC₅₀=80–400 μM ) were identified. The apparent inhibition constant values (K_i) were calculated for the most relevant inhibitors and computational docking studies were performed to understand both their binding capacity and the mode of interaction with the glycosidases.     

Gold‐ or Platinum‐Catalyzed Cascade Processes of Alkynol Derivatives Involving Hydroalkoxylation Reactions Followed by Prins‐Type Cyclizations

An efficient method for the synthesis of [3.3.1]bicyclic compounds from easily available alkynol derivatives has been developed. The reaction is based on a gold‐ or platinum‐catalyzed tandem process that involves an intramolecular hydroalkoxylation of a triple bond followed by a Prins‐type cyclization. The reaction has been carried out with differently substituted alkynol derivatives and oxygen‐, nitrogen‐, and carbon‐centered nucleophiles. The incorporation of halogen atoms as nucleophiles and elimination reactions has also been studied. Enantiomerically pure [3.3.1]bicyclic systems were easily synthesized from the chiral pool.