Hydrotalcite-derived Co-containing mixed metal oxide catalysts for methanol incineration

The Co–Mg–Al mixed metal oxides were prepared by calcination of co-precipitated hydrotalcite-like precursors at various temperatures (600–800 °C), characterised with respect to chemical (AAS) and phase (XRD) composition, textural parameters (BET), form and aggregation of cobalt species (UV–vis-DRS) and their redox properties (H₂-TPR, cyclic voltammetry). Moreover, the process of thermal decomposition of hydrotalcite-like materials to mixed metal oxide systems was studied by thermogravimetric method combined with the analysis of gaseous decomposition products by mass spectrometry. Calcined hydrotalcite-like materials were tested as catalysts for methanol incineration. Catalytic performance of the oxides depended on cobalt content, Mg/Al ratio and calcination temperature. The catalysts with lower cobalt content, higher Mg/Al ratio and calcined at lower temperatures (600 or 700 °C) were less effective in the process of methanol incineration. In a series of the studied catalysts, the best results, with respect to high catalytic activity and selectivity to CO₂, were obtained for the mixed oxide with Co:Mg:Al molar ratio of 10:57:33 calcined at 800 °C. High activity of this catalyst was likely connected with the presence of a Co–Mg–Al spinel-type phases, containing easy reducible Co³⁺ cations, formed during high-temperature treatment of the hydrotalcite-like precursor.     

Efficient Solvent‐Free Synthesis of Benzothiazine‐Fused Pyrrolo[3,4‐c]coumarins: Cycloaddition Reactions between Coumarin‐Based Dihydrobenzothiazoles and Isocyanides

A new and unusual synthesis of benzothiazine‐fused pyrrolo[3,4‐c]coumarins, involving the ring‐opening of coumarin‐based dihydrobenzothiazoles and subsequent [4+1] cycloaddition reaction with isocyanides, was described. Thus, simple heating of various 3‐(2,3‐dihydro‐2‐methylbenzo[d]thiazol‐2‐yl)coumarins with isocyanides produced the title compounds in good yields under solvent‐free conditions.     

Synthesis of Novel α‐(Acyloxy)‐α‐(quinolin‐4‐yl)acetamides by a Three‐Component Reaction between an Isocyanide,Quinoline‐4‐carbaldehyde,and Arenecarboxylic Acids

Novel α‐(acyloxy)‐α‐(quinolin‐4‐yl)acetamides were synthesized by the Passerini three‐component reaction between an isocyanide, quinoline‐4‐carbaldehyde, and arenecarboxylic acids in H₂O. The reactions were carried out in one pot at room temperature with quantitative yields.     

Substituent effects in trans‐p,p′‐disubstituted azobenzenes: X‐ray structures at 100 K and DFT‐calculated structures

The crystal and molecular structures of two para‐substituted azobenzenes with π‐electron‐donating –NEt₂ and π‐electron‐withdrawing –COOEt groups are reported, along with the effects of the substituents on the aromaticity of the benzene ring. The deformation of the aromatic ring around the –NEt₂ group in N,N,N′,N′‐tetraethyl‐4,4′‐(diazenediyl)dianiline, C₂₀H₂₈N₄, (I), may be caused by steric hindrance and the π‐electron‐donating effects of the amine group. In this structure, one of the amine N atoms demonstrates clear sp²‐hybridization and the other is slightly shifted from the plane of the surrounding atoms. The molecule of the second azobenzene, diethyl 4,4′‐(diazenediyl)dibenzoate, C₁₈H₁₈N₂O₄, (II), lies on a crystallographic inversion centre. Its geometry is normal and comparable with homologous compounds. Density functional theory (DFT) calculations were performed to analyse the changes in the geometry of the studied compounds in the crystalline state and for the isolated molecules. The most significant changes are observed in the values of the N=N—C—C torsion angles, which for the isolated molecules are close to 0.0°. The HOMA (harmonic oscillator model of aromaticity) index, calculated for the benzene ring, demonstrates a slight decrease of the aromaticity in (I) and no substantial changes in (II).     

Size versus volume extensivity of a new class of density matrix functionals

Despite being size-extensive, the "second-generation" 1-matrix functionals for the electron-electron repulsion energy V(ee) yield vanishing correlation energy for the homogeneous electron gas. This failure is directly related to the idempotency condition imposed upon an auxiliary matrix that enters the expression for V(ee). In particular, the recently proposed Kollmar-Hess functional is not volume-extensive and thus is incapable of properly describing any delocalized system at its thermodynamic limit.     

Luminescent chemical waves in the Cu(II)-catalyzed oscillatory oxidation of SCN- ions with hydrogen peroxide

The oscillatory oxidation of thiocyanate ions with hydrogen peroxide, catalyzed by Cu2+ ions in alkaline media, was so far observed as occurring simultaneously in the entire space of the batch or flow reactor. We performed this reaction for the first time in the thin-layer reactor and observed the spatiotemporal course of the above process, in the presence of luminol as the chemiluminescent indicator. A series of luminescent patterns periodically starting from the random reaction center and spreading throughout the entire solution layer was reported. For a batch-stirred system, the bursts of luminescence were found to correlate with the steep decreases of the oscillating Pt electrode potential. These novel results open possibilities for further experimental and theoretical investigations of those spatiotemporal patterns, including studies of the mechanism of this chemically complex process.     

Photochemical molecular imprinting of cholesterol

Cinnamoylated photocrosslinkable cyclodextrin derivatives (BCC) were synthesized by the substitution of β-cyclodextrin (β-CD) with cinnamoyl chloride (CC) and crosslinked with either hexamethylenediisocyanate (HMDI) or toluenediisocyanate (TDI). Cyclodextrin rings were substituted with one or two cinnamoyl moieties, as found from mass spectrometry. The polymeric matrix with cholesterol molecular imprint was obtained on irradiation of molecular assembly formed by the cinnamoyl-functionalized β-cyclodextrin-cholesterol with light at 275 nm, absorbed exclusively by the cinnamoyl chromophores. Irradiation induced crosslinking due to the photodimerization of the cinnamoyl moieties. To determine the adsorption properties of the produced material imprinting was performed in the presence of tritiated cholesterol and the intensity of β radiation from the material was measured. The materials obtained by the adsorption of tritiated cholesterol by nonirradiated polymer were used as controls. It was found that the polymer photocrosslinked in the presence of cholesterol have shown a considerable higher adsorption capacity for cholesterol than the control materials. This confirmed successful formation of molecularly imprinted polymer (MIP) by photochemical crosslinking. The selectivity of imprinting was also confirmed using compounds of similar structures, i.e. ergosterol, dehydroergosterol, and Vitamin D.     

The wettability of poly(tetrafluoroethylene) by aqueous solutions of ternary surfactant mixtures

Contact angle measurements on poly(tetrafluoroethylene) (PTFE) surface were carried out for the systems containing ternary mixtures of cetyltrimethylammonium bromide (CTAB) and p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100) and Triton X-165 (TX165). The aqueous solution of ternary surfactant mixtures were prepared by adding the third surfactant to the binary mixture of the surfactants where the synergetic effect in the reduction of the surface tension of water was determined, to compare the influence of the third surfactants on the values of surface tension of this binary mixture and the values of the contact angle on PTFE. The obtained results and calculations indicate that the ternary mixtures of CTAB + TX165 (αCTAB = 0.2, γ_LV = 60 and 50 mN/m) + TX100 (C = 10⁻⁸ to 10⁻² M) have the biggest efficiency of the reduction of contact angle of water on PTFE in comparison to aqueous solutions of the single surfactants and their binary and ternary mixtures. Also in the case of all studied ternary mixtures of surfactants at concentrations of the bulk phase corresponding to unsaturated monolayer at water-air interface the adsorption of surfactants at PTFE-water interface is different than that at water-air interface, but is the same at concentrations near the critical micelle concentration (CMC). Thus the linear dependences between γ_LV cos θ − γ_LV and cos θ − 1/γ_LV, in the range of concentration studied for all systems confirm the same adsorption at two interfaces only at C near the CMC.