Adsorption of Ni(II) from model solutions using co-precipitated inorganic oxides

The aim of this work was to obtain an inorganic oxide system containing silica and magnesium oxide, and characterized by specific physicochemical properties, in particular well-defined adsorption parameters. The preparation process was carried out according to a co-precipitation method using solutions of sodium silicate and selected inorganic magnesium salt. The oxide system obtained (MgO·SiO₂) was used as a support (adsorbent) of nickel(II) ions, whose precursors were model solutions of nitrates. The effectiveness of the adsorption process was evaluated using many different analytical techniques, including atomic absorption spectroscopy, energy dispersive X-ray spectroscopy and equivalent point titration. Moreover the stability of adsorbent/adsorbate bonding was estimated. The oxide systems—adsorbents—used in the process were also analyzed according to their physicochemical properties, especially changes in adsorption parameters. The last part of the study involved evaluation of the kinetics of the adsorption process depending on time and the pH of the reaction system.     

A new type of cation‐exchange polymeric microspheres with pendant methylenethiol groups

Synthesis and characterization of the new styrene microspheres with pendant methylenethiol groups are presented. At the first stage, the polymeric matrices were obtained by the suspension–emulsion polymerization of monomers: styrene (St) with 2,3‐(2‐hydroxy‐3‐methacryloyloxypropoxy)naphthalene (NAF.DM) or (bis[4(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]sulfide (BES.DM) or divinylbenzene (DVB). At the second stage, the modification of the sythesized matrices was performed as follows: the matrices were reacted with paraformaldehyde in the presence of hydrochloric acid forming chloromethyl derivatives. Next, by reaction with thiourea, a thiouronium salt was obtained, and then the hydrolysis with NaOH solution and acidification with HCl were carried out. Finally, microspheres with –CH₂SH groups on their surface were obtained. The –SH group content (elemental analysis), thermal properties (thermogravimetric analysis), Fourier transform infrared as well as the swelling characteristics of the functional microspheres were examined. The surface texture was also visualized by the atomic force microscopy (AFM) method. The obtained polymers were screened towards sorption of Cu(II) ions. It was found that a better correlation between the experimental Cu(II) uptake and the theoretical curves predicted by the Langmuir or Freundlich models is obtained in the case of the DVB–St–SH polymer. In the case of the BES.DM–St–SH and 2,3‐NAF–St–SH ones, the Freundlich model corresponded quite well to the experimental data. Copyright © 2013 John Wiley & Sons, Ltd.     

The influence of oxidation number of sulfur on the polymerization and thermo-mechanical properties of dimethacrylate copolymers

Structure and characterization of the sulfur-containing monomers bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfide (S·DM), bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfinyl (SO·DM), bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfonyl (SO₂·DM), and their photopolymerization with N-vinyl-2-pyrrolidone (NVP) are presented. The monomers were obtained in the reaction of derivatives of aromatic diols with 2-(chloromethyl)oxirane in the two-phase liquid/liquid system, including organic and aqueous phases. Next, esterification of the obtained diglycidyl ether was carried out with the use of methacrylic acid. Photopolymerization of the compositions (S·DM, SO·DM, SO₂·DM and NVP) and the initiator (Irgacure 651) was carried out. The influence of oxidation number of sulfur on the properties of the obtained copolymers was studied. The following properties were determined: density, glass transition temperature, Young’s modulus, hardness and tensile strength. Additionally, dynamic-mechanical and thermal properties were investigated. Thermal properties of copolymers under different conditions (in air, in nitrogen and in helium) were tested.     

The effect of increase in concentration of Na(I) ions on biosorption of Cr(III) ions by Enteromorpha prolifera and Spirulina sp

In this study, the effect of the increase in the initial concentration of Na(I) ions in the solution during biosorption of Cr(III) ions by two edible algae: marine macroalga — Enteromorpha prolifera and microalga — Spirulina sp. was investigated. During biosorption, essential elements are exchanged with alkali and alkaline earth metal ions (e.g. Na(I) ions), which are naturally bound with the biomass. The goal of this study was to investigate the effect of the increase in concentration of Na(I) ions on biosorption performance. The equilibrium of the process is described by Langmuir equation. It was found that with the increase in the initial concentration of NaCl (from 132 to 7331 mg L^?1), there was a lower biosorption capacity of Enteromorpha prolifera (from 85.8 to 51.0 mg g^?1) and Spirulina sp. (74.2 to 20.7 mg g^?1) towards Cr(III) ions. It was also possible to determine the number of times the solution used in the biosorption process can be recycled and yet mantain high biosorption capacity. The determined numbers were: 16 for Enteromorpha prolifera and 19 for Spirulina sp.      

Use of direct immersion solid-phase microextraction on polyacrylate and polydimethylsiloxane stationary phases for simultaneous determination of the neutral and basic pharmaceuticals in wastewater

Direct immersion solid-phase microextraction has been optimized and applied to the simultaneous determination of the neutral and basic pharmaceuticals: caffeine, carbamazepine, clomipramine, chlorprothixene and clotrimazole at low concentrations in municipal wastewater. Two absorption type stationary phases: polydimethylsiloxane (PDMS) and polyacrylate (PA) have been found to be most effective for extraction of target analytes. The separation and detection were carried out by gas chromatograph coupled with mass spectrometer working in the selected ion monitoring mode. The method was validated for linearity, detection and quantitation limits, selectivity and precision. The average correlation coefficient of the calibration curves was 0.9933. The LOD values in influent and effluent wastewater were in the range of 10–145 ng L^?1 and 4–111 ng L^?1, respectively, which were a bit higher than those in the deionized water due to matrix effect. The high values of distribution coefficient (K _fs ) in PDMS/water and PA/water systems (log K _fs between 3.05 and 4.23) indicates the very high applicability of these stationary phases for determination of carbamazepine, clomipramine, chlorprothixene and clotrimazole in water samples.

Open image in new window

     

A study on adsorption of metals by activated carbon in a large-scale (municipal) process of surface water purification

Elements that enter the aquatic environment may pose a health risk to wildlife and humans. The aims of this study were: to determine how the introduction of activated carbon for a water purification system will improve the quality of the water produced; and to investigate the sorption of metals on activated carbons, including determination of the accumulation, as well as changes in concentrations of elements in carbons. The tests were carried out on three types of activated carbons with different granular structure. All samples were collected from Water Treatment Plant Goczalkowice, Poland. Concentrations of elements were measured using an optical emission spectrometer with inductively coupled plasma. The experiment showed that metals accumulating in the activated carbons during the operation included: Ca, Mn, Zn, and Cu. In each of the three types of carbons, it can distinguish such elements as Ba, Al, Cr, Ni, Ti, which are characterized by irregular accumulation during the operation of the filter. The introduction of carbon sorbent for water treatment largely contributed to improvement in the quality of raw material supplied to customers, mainly with regard to taste and smell, as well as to reduction of basic parameters: color, absorbance in the UV range and oxidability.      

Bis(diisopropylammonium) thiosulfate and bis(tert‐butylammonium) thiosulfate

Two new dialkylammonium thiosulfates, namely bis(diisopropylammonium) thiosulfate, 2C₆H₁₆N⁺·S₂O₃²⁻, (I), and bis(tert‐butylammonium) thiosulfate, 2C₄H₁₂N⁺·S₂O₃²⁻, (II), have been characterized. The secondary ammonium salt (I) crystallizes with Z = 4, while the primary ammonium salt (II), with more hydrogen‐bond donors, crystallizes with Z = 8 and a noncrystallographic centre of inversion. In both salts, the organic cations and thiosulfate anions are linked within extensive N—H...O and N—H...S hydrogen‐bond networks, forming extended two‐dimensional layers. Layers are parallel to (10) in (I) and to (002) in (II), and have a polar interior and a nonpolar hydrocarbon exterior. The layered structure and hydrogen‐bond motifs observed in (I) and (II) are similar to those in related ammonium sulfates.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Facile Synthesis of bis‐α‐Aminoalkylphosphinates

Herein we report a facile synthesis of esters of bis‐α‐aminoalkylphosphinic acids obtained by an addition of Cbz‐protected phosphinic analogues of amino acid methyl esters to an appropriate imine in refluxing benzene. Complete deprotection of the esters could be achieved in one step by the action of 30% HBr in acetic acid.