Spontaneous formation of liquid crystalline phases and phase transitions in highly concentrated plasmid DNA

The liquid crystalline (LC) properties of two supercoiled plasmid DNA samples, pBSK (2958 bp) and pGEM (3000 bp), have been studied using polarised light microscopy (PLM), circular dichroism (CD) and UV–Vis spectroscopy. The influence of methods of isolation on plasmid LC behaviour is described, and using PLM we have demonstrated the spontaneous formation of cholesteric fingerprint-like textures. Preliminary studies of LC phase transitions in pGEM show the irreversibility of LC phase formation, as a consequence of changes in the tertiary structure of supercoiled plasmids. Using UV–Vis spectroscopy a hyperchromic effect was observed with increasing temperature. The CD spectra clearly showed structural changes, and probably mismatching of DNA bases, during cooling. Finally, we have observed an irreversible phase transition in plasmid DNA which is very different from that previously reported in linear DNA.     

Application of Internal Standard for Micro Extraction– Spectrophotometric Determination of Bismuth in Pharmaceutical Formulations

 A micro extraction – spectrophotometric procedure is developed for the determination of bismuth in pharmaceutical formulations. The procedure is based on the extraction of tetraiodobismuthate(III) ion paired with benzyltributylammonium cation into chloroform. The application of Nile Blue as internal standard (IS) enabled good analytical performance for micro-scale analysis. The ratio between the absorbances measured at 491 nm (bismuth complex) and at 632 nm (IS) was taken as the analytical signal. The procedure was carried out in Eppendorf tubes, lowering significantly the use of reagents and the volume of organic solvent. In the calibration range up to 60 mgċl⁻¹, the linear regression coefficient was 0.9999, the CV for 15 mgċl⁻¹ and for 50 mgċl⁻¹ Bi were 1.6% and 0.7% respectively. The results obtained in the analysis of pharmaceutical formulations were in good agreement with the results of EDTA titration method. Received November 25, 1999. Revision February 14, 2000.     

Estimation of the lipophilicity of antiarrhythmic and antihypertensive active 1-substituted pyrrolidin-2-one and pyrrolidine derivatives

The lipophilicity of some antiarrhythmic and antihypertensive active 1-[2-hydroxy- or 1-[2-acetoxy-3-(4-aryl-1-piperazinyl)propyl]pyrrolidin-2-one derivatives (1-12) has been investigated. Their lipophilicity (R(MO) and log k') was determined by reversed-phase thin-layer chromatography and reversed-phase high-performance liquid chromatography with mixtures of acetonitrile and Tris buffer as mobile phases. The partition coefficients of compounds 1-12 (log P(ScilogP)) were also calculated with the ScilogP program. Comparison of R(MO), log k' and calculated log D(7.0 ScilogP) values enabled calculation of clog D(7.0 TLC) and clog D(7.0 HPLC) values. Preliminary quantitative structure-activity relationship studies indicated that for active compounds there is a dependence between affinity for alpha(2)-adrenoceptors and their clog D(7.0 HPLC) values.     

Determination of aluminium and chromium in serum by atomic absorption spectrometry

Summary The optimal conditions for the determination of aluminium and chromium in blood serum are proposed. Several sample pretreatment procedures for the purpose are compared. The best results are obtained by sample dilution with nitric acid (0.1 mol/l) and addition of Mg(NO₃)₂ as modifier with a magnesium concentration of 0.2 mg/ml. This procedure has been used for studying the intestinal intake of aluminium by patients after oral administration of aluminium compounds.     

Unlocking a (Pseudo)-Mechanically Interlocked Molecule with a Coronene “Shoehorn”

Mechanically interlocked molecules (MIMs) have gained increasing interest during the last decades, not only because of their aesthetic appeal, but also because their unique properties have allowed them to find applications in nanotechnology, catalysis, chemosensing and biomedicine. Herein we describe how a pyrene molecule with four octynyl substituents can be easily encapsulated within the cavity of a tetragold(I) rectangle-like metallobox, by template formation of the metallo-assembly in the presence of the guest. The resulting assembly behaves as a mechanically interlocked molecule (MIM), in which the four long limbs of the guest protrude from the entrances of the metallobox, thus locking the guest inside the cavity of the metallobox. The new assembly resembles a metallo-suit[4]ane, given the number of protruding long limbs and the presence of the metal atoms in the host molecule. However, unlike normal MIMs, this molecule can release the tetra-substituted pyrene guest by the addition of coronene, which can smoothly replace the guest in the cavity of the metallobox. Combined experimental and computational studies allowed the role of the coronene molecule in facilitating the release of the tetrasubstituted pyrene guest to be explained, through a process that we named “shoehorning”, as the coronene compresses the flexible limbs of the guest so that it can reduce its size to slide in and out the metallobox.     

Unexpected Factors Affecting the Kinetics of Guest Molecule Release from Investigation of Binary Chemical Systems Trapped in a Single Void of Mesoporous Silica Particles

In this work, we present results for loading of well-defined binary systems (cocrystal, solid solution) and untreated materials (physical mixtures) into the voids of MCM-41 mesoporous silica particles employing three different filling methods. The applied techniques belong to the group of “wet methods” (diffusion supported loading – DiSupLo ) and “solvent-free methods” (mechanical ball-mill loading – MeLo , thermal solvent free – TSF ). As probes for testing the guest1-guest2 interactions inside the MCM-41 pores we employed the benzoic acid ( BA ), perfluorobenzoic acid ( PFBA ), and 4-fluorobenzoic acid ( 4-FBA ). The guests intermolecular contacts and phase changes were monitored employing magic angle spinning (MAS) NMR Spectroscopy techniques and powder X-ray diffraction (PXRD). Since mesoporous silica materials are commonly used in drug delivery system research, special attention has been paid to factors affecting guest release kinetics. It has been proven that not only the content and composition of binary systems, but also the loading technique have a strong impact on the rate of guests release. Innovative methods of visualizing differences in release kinetics are presented.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetics and Characterization of Degradation Products of Dihydralazine and Hydrochlorothiazide in Binary Mixture by HPLC-UV,LC-DAD and LC–MS Methods

Dihydralazine and hydrochlorothiazide were stored at high temperature and humidity, under UV/Vis light and different pH, as individual drugs and the mixture. Then, a sensitive and selective HPLC-UV method was developed for simultaneous determination of dihydralazine and hydrochlorothiazide in presence of their degradation products. Finally, the degradation products were characterized through LC-DAD and LC–MS methods. Dihydralazine was sensitive to high temperature and humidity, UV/Vis light and pH?≥?7. At the same time, it was resistant to acidic conditions. Hydrochlorothiazide was sensitive to high temperature and humidity, UV/Vis light and changes in pH. Its highest level of degradation was observed in 1 M HCl. Degradation of the drugs was higher when they were stressed in the mixture. In the case of dihydralazine, the percentage degradation was 5–15 times higher. What is more, dihydralazine became sensitive to acidic conditions. Hydrochlorothiazide was shown to be more sensitive to UV/Vis light and pH?>?4. Degradation of dihydralazine and hydrochlorothiazide followed first-order kinetics. The quickest degradation of dihydralazine was found to be in 1 M NaOH while of hydrochlorothiazide was in 1 M HCl (individual hydrochlorothiazide) or at pH 7–10 (hydrochlorothiazide in the mixture). A number of new degradation products were detected and some of them were identified by our LC-DAD and LC–MS methods. In the stressed individual samples, (phenylmethyl)hydrazine and 1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide were observed for the first time. Interactions between dihydralazine and hydrochlorothiazide in the mixture were confirmed by additional degradation products, e.g., 2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1,4-trioxide.     

Silver nanoparticles formed in bio- and chemical syntheses with biosurfactant as the stabilizing agent

In this work, the comparison of the physical properties of silver nanoparticles (AgNPs) obtained via the reduction of silver nitrate (AgNO₃) in biological and chemical (model) syntheses supplemented with the biosurfactant surfactin is described. In the studies, two strains of Bacillus subtilis (denoted T’1 and I’1a) were used. The biological synthesis of AgNPs was performed using supernatants obtained from cultures of bacteria growing on brewery effluents, molasses, and Luria–Bretani (LB) medium. In model experiments, ascorbic acid served as the reductant; surfactin acted as the stabilizing agent. The surfactin concentrations were adjusted to 5 and 30?mg/L, which corresponded to minimum and maximum surfactin concentrations as measured in the supernatants obtained from the B. subtilis cultures. The chemical synthesis was carried out at acidic as well as alkaline pH. Dynamic light scattering (DLS) revealed that in model and biological samples, single AgNPs were accompanied by aggregated structures. Transmission electron microscopy showed that the contribution of the aggregates in bacterial supernatants and in chemical synthesis is negligible under acidic conditions. However, in the alkaline environment, this contribution predominates. In the model experiments, smaller nanoparticles were formed with higher concentrations of surfactant. The presence of surfactin significantly increased the stability of AgNPs in both bio- and chemical syntheses.