QSAR Studies on the COX-2 Inhibition by 3,4-Diarylcycloxazolones Based on MEDV Descriptor

Selective inhibition of cyclooxygenase-2 (COX-2) might avoid the side effects of current available nonsteroidal antiinflammatory drugs while retaining their therapeutic efficacy. A novel variable selection and modeling method based on prediction is developed to construct the quantitative structure-activity relationships (QSAR) between the molecular electronegativity distance vector (MEDV) based on 13 atomic types and the biological activities of a set of selective cyclooxygenase-2 inhibitory molecules, 3,4-diarylcycloxazolones (DAA) plus indomethacin,naproxen, and celecoxib. Using multiple linear regression, a 5-variable linear model is developed with the calibrated correlation coefficient of 0.9271 and root mean square error of 0.17 in modeling stage and the validated correlation coefficient of 0.9030 and root mean square error of 0.20 in leave-one-out validation step, respectively. To further test the predictive ability of the model, 20 DAA compounds are picked up to construct a training set which is used to build a QSAR model and then the model is employed to predict the biological activities of the balance compounds. The predicted correlation coefficient and root mean square error are 0.9332 and 0.19, respectively.     

Biosensors based on enzyme field-effect transistors for determination of some substrates and inhibitors

This paper is a review of the authors' publications concerning the development of biosensors based on enzyme field-effect transistors (ENFETs) for direct substrates or inhibitors analysis. Such biosensors were designed by using immobilised enzymes and ion-selective field-effect transistors (ISFETs). Highly specific, sensitive, simple, fast and cheap determination of different substances renders them as promising tools in medicine, biotechnology, environmental control, agriculture and the food industry.The biosensors based on ENFETs and direct enzyme analysis for determination of concentrations of different substrates (glucose, urea, penicillin, formaldehyde, creatinine, etc.) have been developed and their laboratory prototypes were fabricated. Improvement of the analytical characteristics of such biosensors may be achieved by using a differential mode of measurement, working solutions with different buffer concentrations and specific agents, negatively or positively charged additional membranes, or genetically modified enzymes. These approaches allow one to decrease the effect of the buffer capacity influence on the sensor response in an aim to increase the sensitivity of the biosensors and to extend their dynamic ranges.Biosensors for the determination of concentrations of different toxic substances (organophosphorous pesticides, heavy metal ions, hypochlorite, glycoalkaloids, etc.) were designed on the basis of reversible and/or irreversible enzyme inhibition effect(s). The conception of an enzymatic multibiosensor for the determination of different toxic substances based on the enzyme inhibition effect is also described.We will discuss the respective advantages and disadvantages of biosensors based on the ENFETs developed and also demonstrate their practical application.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.     

Simultaneous spectrophotometric determination of La, Ho, Mn 5-Br-PADAP complexes using multivariate calibration with partial least-squares (PLS) data evaluation

A simple and fast analytical pocedure is proposed for the simultaneous spectrophotometric determination of lanthanum, holmium and manganese in synthetic ceramics, (La(0.8-x) Hox Sr0.2 MnO3), by using the partial least-squares (PLS) method. As chromogenic agent 5-Br-PADAP [2-(5-bromo-2-pyridylazo)-5-diethylaminophenol] was used, which form colored complexes with the three elements studied. To avoid metal hydrolysis, a mixture of ethanol and Triton X-100 at pH 9.5 was used for all experiments. A set of 17 calibration solutions measured throughout the 400-700 nm wavelength range was used in the calibration step. The concentration range for Mn(II) was 1-12 x 10(-6) mol L-1, while the range for the rare earth elements La(III) and Ho(III) was 2-8 x 10(-6) mol L-1. In order to demonstrate the applicability of the proposed method, a set of artificial samples containing the three analytes in variable proportions was prepared and analyzed. The analytical results obtained were quite acceptable with relative errors not greater than 7% in most cases.     

Multifold curdlan gel formation by dialysis into aqueous solutions of metal salts

We have found that the dialysis of curdlan dissolved in alkaline solution into aqueous solutions of metal salts yielded multifold gel structures. Aqueous sodium chloride and potassium chloride as well as pure water induced isotropic gels. Aqueous calcium salts induced liquid crystalline gel with refractive index gradient/amorphous gel alternative structure. Aqueous salts of trivalent aluminum and ferric cations induced a rigid liquid crystalline gel, which shrank above a threshold concentration of each salt. On the other hand, Liesegang ring-like pattern was observed with aqueous solutions of mixed salts of calcium chloride and magnesium chloride. The patterns have been classified to discuss the mechanism of forming the variety of structures.     

Direct qualitative analysis of triacylglycerols by electrospray mass spectrometry using a linear ion trap

Triacylglycerols (TAGs) isolated from a biological sample provide a challenge for mass spectrometric analysis because of the complexity of naturally occurring TAGs, which may contain different fatty acyl substituents resulting in a large number of molecular species having the identical elemental composition. We have investigated the use of mass spectrometry to obtain unambiguous information as to the individual TAG molecular species present in a complex mixture of triacylglycerols using a linear ion trap mass spectrometer. Ammonium adducts of TAGs, [M+NH4]+, were generated by electrospray ionization, which permitted the molecular weight of each TAG molecular species to be determined. The mechanisms involved in the decomposition of the [M+NH4]+ and subsequent fragment ions were investigated using deuterium labeling, MS/MS, and MS3 experiments. Collision induced decomposition of [M+NH4]+ ions resulted in the neutral loss of NH3 and an acyl side-chain (as a carboxylic acid) to generate a diacyl product ion. MS/MS data were used to identify each acyl group present for a given [M+NH4]+ ion, and this information could be combined with molecular weight data to identify possible TAG molecular species present in a biological extract. Subsequent MS3 experiments on the resultant diacyl product ions, which gave rise to acylium (RCO+) and related ions, enabled unambiguous TAG molecular assignments. These strategies of MS, MS/MS, and MS3 experiments were applied to identify components within a complex mixture of neutral lipids extracted from RAW 264.7 cells.     

含有机配体的活性双过氧钒配合物与组氨酸的相互作用研究

在合成和表征了4种具有较强生物活性双过氧钒配合物K_3[VO(O_2)_2(ox)]· 2H_2O，Na[VO(O_2)_2(bipy)]·5H_2O，K[VO(O_2)_2(phen)]·3H_2O和K_2[VO (O_2)_2(pic)]·2H_2O[分别缩写为pV(ox)，pV(bipy)，pV(phen)和pV(pic)，其中 ox为草酸根，bipy为2,2'-联吡啶，phen为邻菲咯啉，pic为2-羧酸吡啶负离子]的 基础上，利用多种NMR技术和电喷雾质谱（ESI-MS）研究了这4种含有机配体双过氧 钒酸合物与组氨酸（His）在溶液中的相互作用以及反应物浓度、时间、pH等对相 互作用体系的影响。~(51)V NMR跟踪监测的结果表明：双过氧钒配合物pV(ox)和 pV(pic)与His在中性水溶液中存在强配位相互作用，而pV(bipy)和pV(phen)与His 在中性水溶液中无明显作用。我们还利用谱学方法确定了pV(ox)和His相互作用后 所生成产物是pV(ox)分别与His在中性水溶液中无明显作用。我们还利用谱学方法 确定了pV(ox)和His相互作用后所生成产物是pV(ox)分别与His咪唑基上的3-N和1- N配位的一对异构体。     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropylene

The relationships between structure and properties have been established for isotactic polypropylene, iPP, homopolymers synthesized by metallocene catalyst systems. These iPPs exhibit different isotacticity degrees and molecular weights, and several thermal treatments during their processing have been applied. The most important factor affecting the structure and properties of these polymers is the isotacticity content. The thermal treatment, i.e., the rate of cooling from the melt, is also important and a clear molecular weight effect has been also found for the sample with lowest M_w. These factors affect the thermal properties, the degree of crystallinity and, therefore, the structural parameters and the viscoelastic behavior. A slow cooling from melt favors the formation of the γ phase instead of the α modification. The storage modulus, Young modulus and microhardness values increase as crystallinity does, independently of the origin of this increase: higher isotacticity or application of a slow crystallization from the melt.