Determination of total chromium in fresh water by atomic absorption spectrometry following flotation preconcentration

A flotation method is proposed for the quantitative preconcentration and determination of total chromium by electrothermal atomic absorption spectrometry in fresh water samples, without previous reduction or oxidation of the chromium ion state. Hydrated iron(III) oxide and iron(III) tetramethylenedithiocarbamate were used as precipitating collectors. The detection limit of the method is 0.01 g/L.     

Optimization of the CHARMM additive force field for DNA: Improved treatment of the BI/BII conformational equilibrium

The B-form of DNA can populate two different backbone conformations: BI and BII, defined by the difference between the torsion angles ε and ζ (BI = ε-ζ < 0 and BII = ε-ζ > 0). BI is the most populated state, but the population of the BII state, which is sequence dependent, is significant and accumulating evidence shows that BII affects the overall structure of DNA, and thus influences protein-DNA recognition. This work presents a reparametrization of the CHARMM27 additive nucleic acid force field to increase the sampling of the BII form in MD simulations of DNA. In addition, minor modifications of sugar puckering were introduced to facilitate sampling of the A form of DNA under the appropriate environmental conditions. Parameter optimization was guided by quantum mechanical data on model compounds, followed by calculations on several DNA duplexes in the condensed phase. The selected optimized parameters were then validated against a number of DNA duplexes, with the most extensive tests performed on the EcoRI dodecamer, including comparative calculations using the Amber Parm99bsc0 force field. The new CHARMM model better reproduces experimentally observed sampling of the BII conformation, including sampling as a function of sequence. In addition, the model reproduces the A form of the 1ZF1 duplex in 75 % ethanol, and yields a stable Z-DNA conformation of duplex (GTACGTAC) in its crystal environment. The resulting model, in combination with a recent reoptimization of the CHARMM27 force field for RNA, will be referred to as CHARMM36.     

A microfluidic system enabling Raman measurements of the oxygenation cycle in single optically trapped red blood cells

Using a lab-on-a-chip approach we demonstrate the possibility of selecting a single cell with certain properties and following its dynamics after an environmental stimulation in real time using Raman spectroscopy. This is accomplished by combining a micro Raman set-up with optical tweezers and a microfluidic system. The latter gives full control over the media surrounding the cell, and it consists of a pattern of channels and reservoirs defined by electron beam lithography that is moulded into rubber silicon (PDMS). Different buffers can be transported through the channels using electro-osmotic flow, while the resonance Raman response of an optically trapped red blood cell (RBC) is simultaneously registered. This makes it possible to monitor the oxygenation cycle of the cell in real time and to investigate effects like photo-induced chemistry caused by the illumination. The experimental set-up has high potential for in vivo monitoring of cellular drug response using a variety of spectroscopic probes.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

d‐Secoestrone derivatives. VI. 17β‐Benzyl‐17α‐hydroxy‐3‐methoxyestra‐1,3,5(10)‐trien‐16‐one

The title mol­ecule, C₂₆H₃₀O₃, shows a novel chemical rearrangement of the substituents at position 17, i.e. an α‐­orientation of the hydroxy group and a β‐orientation of the bulky benzyl moiety. The packing arrangement consists of coils formed by O2?O3 hydrogen bonds along the c axis. The compound shows complete loss of oestrogenic activity, and neither does it exhibit an antagonistic effect.     

Bio-Templated Chiral Zeolitic Imidazolate Framework for Enantioselective Chemoresistive Sensing

Chiral metal–organic frameworks (MOFs) have gained rising attention as ordered nanoporous materials for enantiomer separations, chiral catalysis, and sensing. Among those, chiral MOFs are generally obtained through complex synthetic routes by using a limited choice of reactive chiral organic precursors as the primary linkers or auxiliary ligands. Here, we report a template-controlled synthesis of chiral MOFs from achiral precursors grown on chiral nematic cellulose-derived nanostructured bio-templates. We demonstrate that chiral MOFs, specifically, zeolitic imidazolate framework (ZIF), unc -[Zn(2-MeIm)₂, 2-MeIm=2-methylimidazole], can be grown from regular precursors within nanoporous organized chiral nematic nanocelluloses via directed assembly on twisted bundles of cellulose nanocrystals. The template-grown chiral ZIF possesses tetragonal crystal structure with chiral space group of P4₁, which is different from traditional cubic crystal structure of I-43 m for freely grown conventional ZIF-8. The uniaxially compressed dimensions of the unit cell of templated ZIF and crystalline dimensions are signatures of this structure. We observe that the templated chiral ZIF can facilitate the enantiotropic sensing. It shows enantioselective recognition and chiral sensing abilities with a low limit of detection of 39 μM and the corresponding limit of chiral detection of 300 μM for representative chiral amino acid, D- and L- alanine.     

Correlating Structure and KA2 Catalytic Activity of ZnII Hydrazone Complexes

Two new Zn(II) complexes bearing tridentate hydrazone-based ligands with NNO or NNS donor atoms were synthesised and characterised by elemental analysis, infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies, and single crystal X-ray diffraction methods. These complexes, together with four previously synthesised analogues, having hydrazone ligands with a NNO donor set of atoms, were successfully employed as catalysts in the ketone-amine-alkyne (KA²) coupling reaction, furnishing tetrasubstituted propargylamines, compounds with unique applications in organic chemistry. DFT calculations at the CAM-B3LYP/TZP level of theory were performed to elucidate the electronic structure of the investigated Zn(II) complexes, excellently correlating the structure of the complexes to their catalytic reactivity.     

Determination of acidic constants of some phenyl-hydroxyiminoethyl quinolinium compounds

Mixed acidic constants (pK _a ) of quinolinium oximes [1-(2-phenyl-2-hydroxyiminoethyl)-1-quinolinium chloride (F-1), 1-(2-phenyl-2-hydroxyiminoethyl)-1-isoquinolinium chloride (F-2), 1-(2-phenyl-2-hydroxyiminoethyl)-1-(4-methyl)-quinolinium chloride (F-3), and 1-(2-phenyl-2-hydroxyiminoethyl)-1-(6-methyl)-quinolinium chloride (F-4)] have been determined via their UV absorption spectra recorded in the series ofBritton-Robinson's buffer solutions in thepH region 8.74–11.28 (t=25±0.5°C, =0.2). The obtainedpK _a values are in good agreement with those achieved by applying graphical methods. The followingpK _a values have been obtained: 9.93 forF-1, 9.90 forF-2, and 10.02 forF-3 andF-4.On the basis of potentiometric titrations thermodynamic acidic constants (pK _a ) of compoundsF-1,F-2,F-3, andF-4 have been determined and they were found to be 9.82, 9.71, 9.91, and 9.86, respectively. The values obtained by transferringpK _a intopK _a are in good agreement with the values obtained spectrophotometrically.

---

Bestimmung der Aciditätskonstanten einiger Phenyl-hydroxyiminoethylchinolin-Verbindungen

Zusammenfassung Die Mischaciditätskonstanten (pK _a ) der Chinolin-Oxime 1-(2-Phenyl-2-hydroxyiminoethyl)-1-chinolinium chlorid (F-1), 1-(2-Phenyl-2-hydroxyiminoethyl)-1-isochinolium chlorid (F-2), 1-(2-Phenyl-2-hydroxyiminoethyl)-1-(4-methyl)-chinolinium chlorid (F-3) und 1-(2-Phenyl-2-hydroxyiminoethyl)-1-(6-methyl)-chinolinium chlorid (F-4) wurden durch ihre UV-Absorptionspektren in einer Reihe vonBritton-Robinson-Pufferlösungen impH-Intervall 8.74–11.28 (t=25±0.5°C; =0.2) bestimmt. Die berechnetenpK _a -Werte stimmen mit den über graphische Methoden erhaltenen Ergebnissen überein. DerpK _a -Wert beträgt 9.93 für die VerbindungF-1 und 9.90 fürF-2, sowie 10.02 fürF-3 andF-4.Auf Grund der potentiometrischen Titration wurden auch die thermodynamischen Aciditätskonstanten (pK _a ) berechnet: 9.82 fürF-1, 9.71 fürF-2, 9.91 fürF-3 und 9.86 fürF-4. Wenn man diese Konstanten in Mischaciditätskonstanten überträgt, erhält man Werte, die mit den durch spektrophotometrischen Bestimmungen erhaltenen Werten gut übereinstimmen.

     

The Influence of pH and Temperature on the Equilibrium and Dynamic Surface Tension of Aqueous Solutions of Sodium Oleate

For aqueous solutions of sodium oleate, the dynamic surface tension (using the maximum bubble pressure technique) and the equilibrium surface tensions (using the du Noüy ring method) were studied. Experiments were carried out within the pH range 7 to 13 and at temperatures from 20 to 60 degrees C. From the equilibrium surface tension studies at 25 degrees C, a wide variation in surface activity was found to occur in the premicellar concentration range, depending on pH and oleate concentration, and this was explained on the basis of the formation of strongly surface-active premicellar species. It was also shown that the critical micelle concentration (cmc) of the system increased with pH within the pH range 7-12. Dynamic surface tension experiments were carried out from 20 to 60 degrees C at concentrations beyond the cmc in alkaline solutions, and the adsorption kinetics at the air/solution interface were analyzed using established theoretical diffusion models. From these data, the effective diffusion coefficients (D(eff)) for the oleate species were determined and the presence of an interfacial activation barrier in the diffusion process was confirmed. It was found that the D(eff) values obtained within the temperature range from 40 to 60 degrees C at 2-3 mM were in general agreement with previously reported values for the oleate dimer obtained by pulse-gradient FT-NMR. Furthermore, D(eff) significantly increased with temperature and also increased with concentration at higher temperatures (>40 degrees C). Copyright 2001 Academic Press.     

Structural diversity of isothiocyanato Cd(II) and Zn(II) Girard’s T hydrazone complexes in solution and solid state: effect of H-bonding on coordination number and supramolecular assembly of Cd(II) complex in solid state

The isothiocyanato Zn(II) complex (1) and mixed isothiocyanato/thiocyanato Cd(II) complex (2) with the condensation product of 2-acetylpyridine and trimethylammoniumacetohydrazide chloride (Girard’s T reagent) (HLCl) were investigated both experimentally and theoretically. The crystal structures of both complexes showed tridentate N₂O coordination of hydrazine ligand. In complex 1 square-pyramidal coordination surrounding of Zn(II) consists of deprotonated hydrazone ligand and two isothiocyanato ligands, while in octahedral Cd(II) complex ligand is coordinated without deprotonation as a positively charged species and coordination geometry is completed with two N-coordinated and one S-coordinated NCS^? anions. NMR spectroscopy and molar conductivity results for Cd(II) and Zn(II) complexes indicated their instability in solution. DFT calculations were performed to explain coordination preference and stability of complexes 1 and 2 in solid state and in solution. The obtained Cd(II) complex is the first reported mononuclear pseudohalide/halide Cd(II) complex with quinoline-/pyridine-based hydrazone ligands possessing octahedral geometry in solid state. In this complex, H-bonding has significant impact on coordination number and supramolecular assembly in solid state.