Optimization of Ultrasound-Assisted Extraction of Phenolics from Sideritis raeseri Using Response Surface Methodology

In this study we define the optimal conditions for ultrasound-assisted extraction of bioactive polyphenols from S. raeseri aerial parts using response surface methodology. The influence of ethanol concentration (10–90%), extraction temperature (20–80 °C), extraction time (10–60 min), and solid-to-solvent ratio (1:10–1:50) on total phenolic content as well as on content of individual flavonoids, and hypolaetin and isoscutellarein derivatives was studied. For the experimental design, a central composite design was chosen. In the obtained extracts, the following ranges of targeted compounds were detected: total phenol from 19.32 to 47.23 mg GAE/g dw, HYP from 1.05 to 11.46 mg/g dw, ISC 1 from 0.68 to 10.68 mg/g dw, and ISC 2 from 0.74 to 15.56 mg/g dw. The optimal extraction conditions were set as: ethanol concentration of 65%, extraction time of 50 min, extraction temperature of 63 °C, and solid-to-solvent ratio of 1:40. Contents of TP, HYP, ISC 1, and ISC 2 in optimal extracts were 47.11 mg GAE/g dw, 11.73 mg/g dw, 9.54 mg/g dw, and 15.40 mg/g dw, respectively. Experimentally set values were in good agreement with those predicted by the response surface methodology model, indicating suitability of the used model, as well as the success of response surface methodology in optimizing the conditions of the extraction.     

The Sokolov case,integrable Kirchhoff elasticae,and genus 2 theta functions via discriminantly separable polynomials

We use the discriminantly separable polynomials of degree 2 in each of three variables to integrate explicitly the Sokolov case of a rigid body in an ideal fluid and integrable Kirchhoff elasticae in terms of genus 2 theta functions. The integration procedure is a natural generalization of the one used by Kowalevski in her celebrated 1889 paper. The algebraic background for the most important changes of variables in this integration procedure is associated to the structure of the two-valued groups on an elliptic curve. Such two-valued groups have been introduced by V.M. Buchstaber.     

Complete determination of plant tissues based only on auto‐fluorescence and the advanced image analysis – study of needles and stamens

Proper determination of tissues is one of the challenging problems in modern medicine and histology. Currently, interpretation of the results mainly depends on the experience of a histologist, leading to high percentage of results misinterpretation. Bearing in mind potential application, we proposed the set of procedures that allow us to obtain precise, mathematically determined parameters for tissue discrimination. First, the method was tested on simulated set of images and compared with several other algorithms. As the set of experimentally obtained input data, auto‐fluorescence images of needle cross sections (Picea omorika) and stamens of common centaury (Centaurium erythraea) were used. Determination of cell types is based on inherent features of plant cells – auto‐fluorescence. As each cell type consists of various fluorescent components in different quantities for each type of tissue, its integral emission spectrum can be used as the fingerprint for identification. Cross sections were imaged using four sets of filters for detection of fluorescence (both excitation and emission). Such filter set is standard equipment for most fluorescence microscopes. One additional image was transmission image using the same optics. By applying ℓ₀‐norm‐constrained nonnegative matrix factorization in a space induced by explicit feature maps, it is possible to identify up to 11 tissues in needles and five in stamens (actual number of tissues). In comparison to other image analysis methods, the greatest advantage is the fact that the number of extracted components significantly exceeds the number of initial images while most other techniques can extract only as much components as the number of initial images. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,anti-oxidant activity,and cytotoxicity of salicyloyl derivatives of estra-1,3,5(10)-triene and androst-5-ene

Since many estrane and androstane derivatives exhibit cytotoxic, anti-oxidant, or anti-hormone activity, new steroidal derivatives were synthesised from appropriate estrogen or androgen precursors in order to obtain potential therapeutics for the treatment of steroid-dependent diseases. Starting from estradiol (I), 6-oxo derivatives V and VII were prepared. 17β-Salicyloyl-6-oxo derivatives VI and VIII were synthesised by the reaction of compounds V or VII with methyl salicylate in the presence of sodium. 17β-Salicyloyloxy estradiol IX was prepared from estradiol. Beckmann fragmentation of 16-oxyimino alcohols XII and XIII with methyl salicylate yielded corresponding D-seco derivatives XIV and XV. Simultaneous fragmentation and acylation of compound XII resulted in 3β-salicyloyl-D-seco derivative XVI which was also obtained from compound XIV. Anti-oxidant assays of the newly synthesised compounds V-IX, XIV, and XVI indicated a stronger capacity for hydroxyl radical scavenging, and a weaker capacity for DPPH radical scavenging, compared with the standard anti-oxidants BHA and BHT. Compounds V, XIV, and XVI showed higher or the same activity as BHT. The cytotoxicity of new compounds was evaluated against human breast and prostate carcinoma cells. Compound VI exhibited strong cytotoxicity against MDA-MB-231 cells; compound XIV exhibited strong cytotoxicity against PC-3 cell line, while compound VII moderately inhibited the growth of PC-3 cells.     

Synthesis, X-ray structural analysis, and cytotoxic activity of some new androstane d-homo lactone derivatives

A series of d-homo lactones 4?C10 from dehydroepiandrosterone 1 via 16-hydroximino derivatives 2 and 3 were synthesized. The d-homo lactone 4 was transformed by the Oppenauer oxidation to obtain compound 5. The (Z)-2-hydroxymethylene-4-en-3-one compound 6, was obtained through reaction of 4-en-3-one compound 5 with ethyl formate and sodium hydride. The epoxides 8 and 9 were prepared from compound 7 by oxidation with m-chloroperbenzoic acid. Compound 10 was obtained by treating epoxides 8 and 9 with chromium(VI)-oxide. The structure of compounds 6 and 10 were confirmed by X-ray structural analysis. These derivatives were screened for antitumor activity against three tumor cell lines (human breast adenocarcinoma ER+, MCF-7, human breast adenocarcinoma ER?, MDA-MB-231, prostate cancer AR?, PC-3), and one human non-tumor cell line, MRC-5. Compounds 4, 7, 8, and 10 exhibited significant antitumor activity against MDA-MB-231 cells, while compound 5 showed strong cytotoxicity against MDA-MB-231. No compounds displayed toxicity against MRC-5 cells.     

A PAMPA assay as fast predictive model of passive human skin permeability of new synthesized corticosteroid C-21 esters

The permeation properties of twenty newly synthesized α-alkoxyalkanoyl and α-aryloxyalkanoyl C-21 esters of standard corticosteroids: Fluocinolone acetonide, dexamethasone, triamcinolone acetonide and hydrocortisone were established using a PAMPA assay (70% silicone oil and 30% isopropyl myristate). The data were compared with parent corticosteroids with addition of mometasone furoate and hydrocortisone acetate. All newly synthesized corticosteroid C-21 esters have effective permeability coefficients higher then -6, mostly followed with high values of retention factors and low permeation. The examined compounds were grouped through relationship between obtained retention factors and permeation parameters (groups I-III). The classification confirmed group I (membrane retentions as well as permeation lower then 30%) for all corticosteroid standards except mometasone furoate, a potent topical corticosteroid which, with high membrane retention (81%) and low permeation (7.7%) fits into group III. The largest number of new synthesized corticosteroids C-21 esters, among them all fluocinolone acetonide C-21 esters, have high membrane retentions (32.4%-86.5%) and low permeations (1.3%-27.1%), fitting in group III. The classification was related to previously obtained anti-inflammatory activity data for the fluocinolone acetonide C-21 esters series. According to the PAMPA results the new synthesized esters could be considered as potential new prodrugs with useful benefit/risk ratio.     

Tunable growth factor delivery from injectable hydrogels for tissue engineering

Current sustained delivery strategies of protein therapeutics are limited by the fragility of the protein, resulting in minimal quantities of bioactive protein delivered. In order to achieve prolonged release of bioactive protein, an affinity-based approach was designed which exploits the specific binding of the Src homology 3 (SH3) domain with short proline-rich peptides. Specifically, methyl cellulose was modified with SH3-binding peptides (MC-peptide) with either a weak affinity or strong affinity for SH3. The release profile of SH3-rhFGF2 fusion protein from hyaluronan MC-SH3 peptide (HAMC-peptide) hydrogels was investigated and compared to unmodified controls. SH3-rhFGF2 release from HAMC-peptide was extended to 10 days using peptides with different binding affinities compared to the 48 h release from unmodified HAMC. This system is capable of delivering additional proteins with tunable rates of release, while maintaining bioactivity, and thus is broadly applicable.     

Quantitative adsorption and local structures of gallium(III) at the water-alpha-FeOOH interface

The adsorption of Ga(III) at the water-alpha-FeOOH (goethite) interface has been investigated by means of quantitative adsorption experiments, extended X-ray absorption fine structure (EXAFS) spectroscopy, and surface complexation modeling. Under the conditions studied, pH range 3-11 and surface coverages of 0.9-3.2 micromol/m2, Ga(III) was found to adsorb strongly to alpha-FeOOH, and the surface species were more resistant toward hydrolysis and formation of soluble Ga(OH)4- than either solid gallium hydroxides or soluble polynuclear complexes. The EXAFS measurements revealed the presence of octahedral Ga(III) complexes at the water-alpha-FeOOH interface, with practically no structural variations as a function of pH or total gallium concentration. Analysis of the first coordination shell required an anharmonic model indicating a distorted geometry of the GaO6 octahedra, with mean Ga-O distances at 1.96-1.98 angstroms. A method based on the continuous Cauchy wavelet transforms (CCWT) was used to identify backscattering atoms in the higher coordination shells. This analysis indicated predominately Fe backscattering, and the quantitative data fitting resulted in three Ga-Fe paths at 3.05, 3.2, and 3.55 angstroms, which correspond to two edge-sharing and one corner-sharing linkage, respectively. The collective results from EXAFS spectroscopy showed that Ga(III) adsorbs to Fe equivalent sites at the surface alpha-FeOOH as an extension of the rows of Fe octahedra in the bulk structure. This interpretation was further corroborated by a Ga-Fe-Fe multiple scattering path at 6.13 angstroms. The quantitative adsorption and proton data were modeled using a surface complexation formalism based on a 1 pK(a) constant capacitance model. In agreement with the EXAFS results, the model obtained included one predominating surface complex with the stoichiometry [triple bond]FeOGa(OH)2(-0.5) and the stability constant log beta(intr.) = -2.55 +/- 0.04 ([triple bond]FeOH(-0.5) + Ga3+ + 2H2O <--> [triple bond]FeOGa(OH)2(-0.5) + 3H+).     

Probability for Type I errors in gamma-ray spectrometric measurements of drinking water samples

In gamma-ray spectra, acquired in the absence of the sample, peaks occur which belong to the spectrometer background. When samples are measured, which contain radionuclides that appear in the background also and have activities near the detection level, the background contributes substantially to the peak areas. In the extreme case, when the contribution of the sample is much smaller than the contribution of the background, the peak area attributed to the radionuclide within a sample has the same probability of being positive or negative. Therefore, to interpret the results obtained from measurements of low-activity samples, the performance of the spectrum analysis procedure near the detection level must be known. To test the performance of the spectrum analysis procedure at low activities, the spectrometer background spectra were analyzed as if they had been water samples, prepared as dry residue obtained by evaporation of 50 L of water. The probabilities for false positives together with their decision thresholds are given for radionuclides appearing in the background spectra. For some of the radionuclides that do not appear in the background spectra, probabilities for false detection are given as well.     

Mathematical Analysis of the Formation of Molecule Sizes on a Spinning Disc Reactor

A mathematical analysis of the behaviour of the molecular weights of addition polymers during a polymerisation process is described. Spinning disc reactor (SDR) technology has been shown to yield significant improvements in terms of polymerisation rates whilst retaining close control of the molecular weights and the molecular weight distributions^[1,2]. However, understanding of the kinetics of the polymerisation process on a SDR remains unresolved. One of the questions to be addressed concerns the sizes of the macromolecules preferably formed during the polymerisation process. To address this question, a mathematical analysis of the observed trends in number and weight average molecular weight, monomer concentration and polydispersity during the polymerisation process on a SDR has been undertaken. To validate the results, experimental data obtained from benzoyl peroxide initiated free radical polymerisation of styrene on a SDR^[2] was used. It was concluded that most of the monomers consumed are in the growth of smaller size chains.