Peculiar reduction of graphene oxide into graphene after diffusion in exponentially growing polyelectrolyte multilayers

In the present work, in situ reduction of graphene oxide (GO) into graphene was preformed, after diffusion in exponentially growing polyelectrolyte multilayers, using sodium citrate as the reducing agent. First, the graphene oxide was obtained by treating a commercial grade of Expanded Graphite (EG). Based on XRD and Raman spectroscopy results, a complete exfoliation of graphene nanopellets down to one layer was achieved during the oxidation process. Secondly, the diffusion of GO was carried out in an exponentially growing polyelectrolyte multilayer film made from poly(diallyldimethylammonium chloride) as the polycation and from poly(acrylic acid) as the polyanion. Electrical conductivity of the GO based films was measured during the reduction process as a function of time. The conductivity reached values of the order of 10(-4) S cm(-1), whereas the pristine polyelectrolyte multilayer was highly insulating (～10(-8) S cm(-1)). The conductivity also reached a maximal value after about 24 h of reduction and decreased for longer reduction duration. Some tentative explanations for this peculiar finding will be given.     

Effect of Ni on growth kinetics,microstructural evolution and crystal structure in the Cu(Ni)–Sn system

Abstract

The role of Ni addition in Cu on the growth of intermetallic compounds in the Cu–Sn system is studied based on microstructure, crystal structure and quantitative diffusion analysis. The diffraction pattern analysis of intermetallic compounds indicates that the presence of Ni does not change their crystal structure. However, it strongly affects the microstructural evolution and diffusion rates of components. The growth rate of (Cu,Ni)₃Sn decreases without changing the diffusion coefficient because of the increase in growth rate of (Cu,Ni)₆Sn₅. For 3 at.% or higher Ni addition in Cu, only the (Cu,Ni)₆Sn₅ phase grows in the interdiffusion zone. The elongated grains of (Cu,Ni)₆Sn₅ are found when it is grown from (Cu,Ni)₃Sn. This indicates that the newly formed intermetallic compound joins with the existing grains of the phase. On the other hand, smaller grains are found when this phase grows directly from Cu in the absence of (Cu,Ni)₃Sn indicating the ease of repeated nucleation. Grain size of (Cu,Ni)₆Sn₅ decreases with further increase in Ni content, which indicates a further reduction of activation barrier for nucleation. The relations for the estimation of relevant diffusion parameters are established considering the diffusion mechanism in the Cu(Ni)–Sn system, which is otherwise impossible in the phases with narrow homogeneity range in a ternary system. The flux of Sn increases, whereas the flux of Cu decreases drastically with the addition of very small amount of Ni, such as 0.5 at.% Ni, in Cu. Analysis of the atomic mechanism of diffusion indicates the contribution from both lattice and grain boundary for the growth of (Cu,Ni)₆Sn₅ phase.     

Amplification and second harmonic generation in non-linear fibre waveguides

Optical fibres with organic single-crystal cores offer the potential for efficient second harmonic generation (>50%) and high amplification gain (>35 dB) when centimetre-long devices are pumped by semiconductor lasers of just a few milliwatts of power output.     

Estimation of pioglitazone hydrochloride and metformin hydrochloride in tablets by derivative spectrophotometry and liquid chromatographic methods

Two simple and accurate methods of analysis to determine pioglitazone hydrochloride (PIO) and mefformin hydrochloride (MET) in combined dosage forms were developed using second-derivative spectrophotometry and reversed-phase liquid chromatography (LC). PIO and MET in combined preparations (tablets) were quantified using the second-derivative responses at 227.55 nm for PIO and 257.25 nm for MET in spectra of their solutions in a mixture of methanol and acetonitrile (30 + 70). The calibration curves were linear [correlation coefficient (r) = 0.9984 for PIO and 0.9986 for MET] in the concentration range of 8-40 microg/mL for PIO and 4-12 microg/mL for MET. In the LC method, analysis was performed on a Hypersil ODS-C18 column with 5 microm particle size using the mobile phase acetonitrile-water-acetic acid (75 + 25 + 0.3), adjusted to pH 5.5 with liquor ammonia, at a flow rate of 0.5 mL/min. Measurement was made at a wavelength of 230 nm. Both the drugs were well resolved on the stationary phase, and the retention times were 8.5 min for PIO and 16.0 min for MET. The calibration curves were linear (r = 0.9933 for PIO and 0.9958 for MET) in the concentration range of 4-20 microg/mL for PIO and MET. Both methods were validated, and the results were compared statistically. They were found to be accurate, precise, and specific. The methods were successfully applied to the estimation of PIO and MET in combined tablet formulations.