Simultaneous reversed-phase extraction of lipoxygenase and cyclooxygenase metabolites of arachidonic acid in nasal secretions: methodological aspects

An improved analytical method for the simultaneous solid-phase extraction of arachidonic acid metabolites in biological samples is described. The major aim of the work was to define the cause of the different recoveries reported in the literature for leukotrienes and hydroxyeicosatetraenoic acids. We used nasal lavages to carry out a comparative study of solid-phase extraction parameters of practical importance in securing good recoveries of leukotrienes and hydroxyeicosatetraenoic acids from biological samples. We evaluated the influence of the pH of the sample, the pH of the water used to wash the extraction cartridge before elution of the adsorbed analytes, the comparative behaviour of commercially available octadecyl adsorbents and the influence of the concentration-evaporation step on final recoveries. Data thus obtained show that there is no significant difference in results when the samples and the water used to wash the cartridge before analyte elution are adjusted to pH values ranging between 4.0 and 7.4. Below pH 4.0, losses may be significant. Furthermore, recoveries can be very much dependent on the type of solid-phase cartridge material and on the eluent evaporation method, especially with regard to aqueous phase removal.     

Enhancement of the fluorescence of the blue fluorescent proteins by high pressure or low temperature

Green fluorescent proteins bearing the Y66H mutation exhibit strongly blue-shifted fluorescence excitation and emission spectra. However, these blue fluorescent proteins (BFPs) have lower quantum yields of fluorescence (Phi(f) approximately 0.20), which is believed to stem from the increased conformational freedom of the smaller chromophore. We demonstrate that suppression of chromophore mobility by increasing hydrostatic pressure or by decreasing temperature can enhance the fluorescence quantum yield of these proteins without significantly affecting their absorption properties or the shape of the fluorescence spectra. Analysis of the fluorescence lifetimes in the picosecond and nanosecond regimes reveals that the enhancement of the fluorescence quantum yield is due to the inhibition of fast quenching processes. Temperature-dependent fluorescence measurements reveal two barriers ( approximately 19 and 3 kJ/mol, respectively) for the transition into nonfluorescing states. These steps are probably linked with dissociation of the hydrogen bond between the chromophore and His148 or an intervening water molecule and to the barrier for chromophore twisting in the excited state, respectively. The chromophore's hydrogen-bond equilibrium at room temperature is dominated by entropic effects, while below approximately 200 K the balance is enthalpy-driven.     

Design and synthesis of antagonists of substance P

Synthesis and bioassay of about 65 analogs of substance P (SP) over five years yielded the antagonist [D-Arg1,D-Trp7,9,Leu11]-SP, which was named Spantide, and which was used by many investigators as a "tool". Spantide served as a reference antagonist for the design of 47 new peptides toward the goal of more potent inhibitors. Designs emphasized analogs with D-Trp7, D-Trp9, D-Trp10, D-pClPhe10, Nle11, Leu11, Ile11 and Met11, etc. Twenty-one/47 antagonists were superior in potency to that of Spantide, the best was [D-Arg1,D-Na1(5), D-Trp7,9,Nle11]-SP which required a 255-fold increase in SP concentration to give 50% of the maximum response at a concentration of 10(-5)M of the antagonist; this potency is ca. 5 times that of Spantide. For certain, but not all pairs of undecapeptides and truncated analogs, the undecapeptides may be significantly more potent than the truncated counterparts.     

Femtosecond laser fabrication of high‐Q whispering gallery mode microresonators via two‐photon polymerization

Whispering gallery mode microresonators have been triggering considerable advances in science due to their ability to confine light within small dielectric volumes, which makes them suitable for a wide range of applications. Lithographic approaches have been the dominant technique for fabricating microresonators; however, they restrict the choice of materials due to their multistep processing nature. As an alternative, they report the direct laser fabrication of acrylic based hollow microcylinder resonators, via two‐photon polymerization, with good structural integrity and sidewall roughness of 1.5 nm, which make them promising candidates for photonic applications in the near‐infrared. Such polymeric microresonators exhibit finesse close to 10³ and a quality factor of 1 10⁵, a performance achieved without any additional processing step, which would restrict the choices of materials to be incorporated into the polymeric resonator. This advantage thereby broadens the widespread use of the polymeric microresonators, making them an excellent platform for lasing and nonlinear optics studies in the near‐infrared. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 569–574     

Microwave‐Assisted Tandem Organocatalytic Peptide‐Coupling Intramolecular aza‐Michael Reaction: α,β‐Unsaturated N‐Acyl Pyrazoles as Michael Acceptors

Conjugated N‐acyl pyrazoles have been successfully employed in the organocatalytic enantioselective intramolecular aza‐Michael reaction as ester surrogates. Bifunctional squaramides under microwave irradiation provided the best results in this transformation. Furthermore, this protocol has been combined with a peptide‐coupling reaction in a tandem sequence. The final products were easily converted into the corresponding ethyl esters.     

Simultaneous determination of methyl tert.-butyl ether and its degradation products,other gasoline oxygenates and benzene,toluene, ethylbenzene and xylenes in Catalonian groundwater by purge-and-trap-gas chromatography-mass spectrometry

In Catalonia (northeast Spain), a monitoring program was carried out to determine methyl tert.-butyl ether (MTBE), its main degradation products, tert.-butyl alcohol (TBA), tert.-butyl formate (TBF), and other gasoline additives, the oxygenate dialkyl ethers ethyl tert.-butyl ether, tert.-amyl methyl ether and diisopropyl ether and the aromatic compounds benzene, toluene, ethylbenzene and xylene (BTEX) in 21 groundwater wells that were located near different gasoline point sources (a gasoline spill and underground storage tank leakage). Purge-and-trap coupled to gas chromatography-mass spectrometry was optimised for the simultaneous determination of the above mentioned compounds and enabled to detect concentrations at ng/l or sub-microg/l concentrations. Special attention was given to the determination of polar MTBE degradation products, TBA and TBF, since not much data on method performance and environmental levels are given on these compounds in groundwater. All samples analysed contained MTBE at levels between 0.3 and 70 microg/l. Seven contaminated hot spots were identified with levels up to US Environmental Protection Agency drinking water advisory (20-40 microg/l) and a maximum concentration of 670 microg/l (doubling the Danish suggested toxicity level of 350 microg/l). Samples with high levels of MTBE contained 0.1-60 microg/l of TBA, indicating (but not proving) in situ degradation of parent compound. In all cases, BTEX was at low concentrations or not detected showing less solubility and persistence than MTBE. This fact confirms the suitability of MTBE as a tracer or indicator of long-term gasoline contamination than the historically used BTEX.     

Nachweis von Spuren Chlorid in Feinchemikalien

Ohne Zusammenfassung     

A Versatile Approach to CF3‐Containing 2‐Pyrrolidones by Tandem Michael Addition–Cyclization: Exemplification in the Synthesis of Amidine Class BACE1 Inhibitors

The synthesis of new fluorinated pyrrolidones starting from unprotected amino esters and amino nitriles through a Michael addition–lactamization sequence is described. The resulting CF₃‐containing building blocks, bearing a quaternary stereogenic center adjacent to the fluorinated group, have been converted into amino pyrrolidines that display potent β‐secretase 1 (BACE1) inhibitory activity. This work constitutes an example of selective fluorination as a valid strategy for the modulation of physicochemical and biological properties of lead compounds in drug discovery.     

A full probabilistic analysis of a randomized kinetic model for reaction–deactivation of hydrogen peroxide decomposition with applications to real data

Journal of Mathematical Chemistry - The classical kinetic equation has been broadly used to describe reaction and deactivation processes in chemistry. The mathematical formulation of this...