Optimization of the determination of selenium in marine samples by atomic absorption spectrometry: Comparison of a flameless graphite furnace atomic absorption system with a hydride generation atomic absorption system

A comparison has been made between a graphite furnace system based on nickel as a matrix stabilizing metal and an automated hydride generation system with a heated quartz cell. The effect of nickel as a matrix modifier was studied in pure selenite solutions as well as in biological matrixes by different charring temperatures. The suppression effect of different acids on the response of the analyte is reported and discussed. The use of an electrically heated quartz tube as an alternative to the argon hydrogen flame method unproved the selenium determination by hydride generation atomic absorption. The effect of hydrochloric acid to secure quantitative formation of selenium (IV) and the interference of copper in the response measurements have been studied. Further a comparison has been made between three different digestion procedures when the hydride generation atomic absorption system was applied. The results of the graphite furnace atomic absorption and the hydride generation atomic absorption were found to be equally accurate, but the graphite furnace technique gave better reproducibility.     

A concept study on non-targeted screening for chemical contaminants in food using liquid chromatography–mass spectrometry in combination with a metabolomics approach

A generic method to screen for new or unexpected contaminants at ppm levels in food has been developed. The method comprises an acidic acetonitrile extraction, detection with ultra-high-pressure liquid chromatography coupled to electrospray ionisation time-of-flight mass spectrometry and statistical evaluation using a metabolomics approach comparing suspected contaminated food with uncontaminated foods. The method was tested for 26 model contaminants from 100 μg/g down to 0.4 μg/g in three brands of fresh orange juice. Blinded statistical evaluation revealed signals from all added contaminants detectable by liquid chromatography–electrospray ionisation using positive ionisation mode, while only two false-positive signals were reported. The method is primarily intended to be used for investigation of food samples suspected to be contaminated with unknown substances. Additionally it could be used to continuously monitor for appearance of new food contaminants as a complement to the specific targeted analysis that is today’s foundation of food safety analysis.     

On the dissolution state of cellulose in cold alkali solutions

We have characterized the dissolved state of microcrystalline cellulose (MCC) in cold alkali [2.0 M NaOH(aq)] solutions using a combination of small angle X-ray (SAXS) and static light scattering (SLS), \(^1\)H NMR, NMR self-diffusion, and rheology experiments. NMR and SAXS data demonstrate that the cellulose is fully molecularly dissolved. SLS, however, shows the presence of large concentration fluctuations in the solution, consistent with significant attractive cellulose-cellulose interactions. The scattering data are consistent with fractal cellulose aggregates of micrometre size having a mass fractal dimension \(D\sim 1.5\). At 25\(\,^{\circ }\mathrm {C}\) the solution structure remains unchanged on the time scale of weeks. However, upon heating the solutions above 35\(\,^{\circ }\mathrm {C}\) additional aggregation occurs on the time scale of minutes. Decreasing or increasing the NaOH concentration away from the “optimum” 2 M also leads to additional aggregation. This is seen as an increase of the SAXS intensity at lower q values. Addition of urea (1.8 and 3.6 M, respectively) does not significantly influence the solution structure. With these examples, we will discuss how scattering methods can be used to assess the quality of solvents for cellulose.     

Note on Resonant and Non-resonant Peaks in Electron-Atom Total Scattering Cross Sections

Certain broad low-energy peaks caused by a single partial wave in total cross sections are explained in terms of phase shifts. Such peaks have been associated with the real part of a Regge pole trajectory, having a maximum near an integer value of the angular momentum quantum number. At the peak energies, the pertinent partial-wave phase shift was shown to have a local maximum near a value π/2 modulo π. This implies no time delay in the semiclassical context. The phenomenon is a quantum effect, lacking a semiclassical interpretation.     

Absence of reverse anomeric effect in furanosides

A series of conformationally restricted N-"furanosides" has been synthesized, where the carbons of the tetrahydrofuran ring are kept in one plane by a rigid norbornane skeleton, permitting only the ring oxygen to move above or below the tetrahydrofuran ring plane. This causes the substituents of the anomeric carbon to occupy a pseudoaxial or a pseudoequatorial position. On protonation of these "norbornane-furanosides" with trifluoromethanesulfonic acid, all three compounds exhibited decreasing coupling constants for the anomeric proton, indicating a shift toward the pseudoaxial conformation. The coupling constant measurements were supported by volume integration of NOESY cross-peaks, which also showed a change toward the pseudoaxial conformation upon protonation of the nitrogen. These results provide no evidence for the so-called reverse anomeric effect; on the contrary they are in full agreement with a small normal anomeric effect.     

Food allergen detection with biosensor immunoassays

An optical biosensor was used to develop both direct and sandwich immunoassays for the detection of proteins from milk, egg, hazelnut, peanut, shellfish, and sesame in food samples. Affinity-purified polyclonal antibodies raised against the proteins were immobilized on the biosensor chip. Food samples were injected and the proteins that bound to the antibodies on the surface were detected by a shift in the resonance angle. By adding a second antibody in a sandwich assay, matrix effects could be overcome and the sensitivity and selectivity enhanced. Detection of allergen levels down to 1-12.5 microg/g in food samples was demonstrated for the various assays. Good agreement of results was also obtained from parallel analysis with alternative immunoassays, including rocket immunoelectrophoresis, enzyme immunoassay, and immunoblotting. The present study demonstrates that the sensitivity of the described biosensor technique is comparable to the most sensitive enzymed-linked immunosorbent assays.     

Use of liquid chromatography-diode-array detection and mass spectrometry for rapid product identification in biotechnological synthesis of a hydroxyprogesterone

In exploratory scale biotechnological process development, the product must be rapidly identified although a reference compound may not always be available. LC-diode-array detection and MS were used for this purpose in a process producing 9alpha-hydroxyprogesterone from progesterone as substrate. The electrospray ionization mass spectrometer was combined with an ion trap mass spectrometer for the second generation MS. The preliminary identification, which could be carried out within the course of a day, confirmed that the product was a hydroxyprogesterone. The final identification step, which was much more material intensive and hence time consuming, involved a two-step preparative separation to yield quantities necessary for definitive product identification based on 1H- and 13C NMR.     

Expanding the scope of Lewis acid catalysis in water: remarkable ligand acceleration of aqueous ytterbium triflate catalyzed Michael addition reactions

[reaction: see text] Significant rate acceleration of metal-catalyzed Michael addition reactions in water was observed upon addition of small, dibasic ligands. Ytterbium triflate and TMEDA was the most effective combination leading to a nearly 20-fold faster reaction than in the absence of ligand.     

The synthesis and characterization of all diastereomers of a linear symmetrically fused Tris-Tröger's base analogue: new chiral cleft compounds

The synthesis and characterization of all diastereomers of a linear symmetrically fused tris-Tr?ger's base analogue are described. The diastereomers are unambiguously assigned as syn-anti 1 a, anti-anti 1 b, and syn-syn 1 c isomers, by using X-ray diffraction analysis and NMR spectroscopy. For the first time, the anti-anti and the syn-syn diastereomers of a linear symmetrically fused tris-Tr?ger's base analogue have been synthesized. Molecules 1 a and 1 c are new cleft compounds and analysis of compound 1 a in the solid state shows inclusion of one molecule of CH(2)Cl(2) in the larger aromatic cleft, whereas in isomer 1 c disordered solvent molecules are trapped in the extended aromatic cleft. Furthermore, in the solid state, isomer 1 c forms infinite open channels along one of the crystallographic axes and perpendicular to this axis there are infinitely extending "wedged-ravines". Importantly, each of the diastereomers 1 a-c is resistant to inversion at the stereogenic nitrogen atoms under strongly and weakly acidic conditions in the range from room temperature (RT) to 95 degrees C. This observed configurational stability at the stereogenic nitrogens of 1 a-c is unique for analogues of Tr?ger's base in general to date. Finally, the ratio of cleft compounds 1 a and 1 c significantly increased relative to cavity compound 1 b when ammonium chloride was used as an additive in the Tr?ger's base condensation to 1 a-c suggesting a templating effect of the ammonium ion.     

Near/far-side angular decompositions of Legendre polynomials using the amplitude-phase method

A decomposition of Legendre polynomials into propagating angular waves is derived with the aid of an amplitude-phase method. This decomposition is compared with the ’Nussenzveig/Fuller’ so called near/far-side decomposition of Legendre polynomials. The latter decomposition requires the Legendre function of the second kind. This is not the case with the amplitude-phase decomposition. Both representations have the same asymptotic expressions for large values of \((l+1/2)\sin \theta \), where l and \(\theta \) are the polynomial degree and the angle respectively. Furthermore, both components of both representations satisfy the Legendre differential equation. However, we show the two representations are not identical.