Synthesis of 2-deamino- and 2-deamino-2-nitroactinomycin D

A single step synthesis of 2-deaminoactinomycin D ( 3a ) and 2-deamino-2-nitroactinomycin D ( 2a ) arising from actinomycin D ( 1a, AMD ) is reported. Structural confirmation was made by nmr, ir and chemical conversion to known materials.     

Investigation of Al diffusion in different oxide thin-film layers by SNMS/HFM method

Depth profiles of Ga₂O₃/a-SiO₂/Al₂O₃- substrate, Ga₂O₃/a-Si₃N₄/Al₂O₃- substrate, and Ga₂O₃/Al₂O₃ substrate thin layers were determined by the SNMS/HFM method. Al diffusion from the Al₂O₃ substrate was investigated after 50, and in some cases after 600 hours of heat treatment time at different temperatures (600 °C,850 °C,950 °C,1050 °C and 1150 °C). The diffusion coefficient of Al at 850 °C was found to be D _Al=8.7 * 10^–18 cm²/s in amorphous SiO₂; D _Al=1.5*10^–17 cm²/s in amorphous Si₃N₄ and D _Al=5.5* 10^–16 cm²/s in Ga₂O₃ at 600 °C, respectively. The possible diffusion mechanism is explained in terms of the metal-oxygen bond-strengths. Although the studied materials have high resistivity at room temperature, the applied SNMS/HFM method has proven to be an efficient surface analytical tool even in these cases.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Quality assurance system for a decomposition method as demonstrated for the Wickbold combustion technique

 A five-step model for a quality assurance system is developed for an internal quality control check. It includes the quality control of the decomposition method and the detection method as steps belonging together. The Wickbold combustion technique as decomposition method in combination with atomic absorption spectrometry was chosen. The vaporization of the elements mercury, arsenic, lead, antimony and selenium is based on combustion in an oxyhydrogen flame. To check the efficiency of the analytical system, the uncertainty of results was calculated on the basis of the "Guide to the Expression of Uncertainty in Measurement". Received: 13 January 1997 · Accepted: 29 March 1997     

Liquid chromatographic isolation of coplanar PCB congeners on an activated carbon stationary phase

A rapid and uncomplicated method for the fractionation of PCBs leading to an isolation of the highly toxic non-ortho substituted PCBs is described. The liquid chromatographic separation was achieved on a stationary phase consisting of activated carbon and Celite 545. Using eluents with different polarity, isolation of the non-ortho substituted PCBs in a single fraction was achieved. The fractions were analysed by GC/MS. The method was tested by the determination of non-ortho substituted PCBs in technical mixtures (Aroclor 1254 and Aroclor 1242). The results were compared with those obtained by using an HPLC fractionation on a porous graphitic carbon column. Finally, the micro-column fractionation was used for the determination of non-ortho substituted PCBs in native soil samples. Received: 5 March 1997 / Revised: 4 June 1997 / Accepted: 6 June 1997     

Efficient Entropy-Driven Inhibition of Dipeptidyl Peptidase III by Hydroxyethylene Transition-State Peptidomimetics

Dipeptidyl peptidase III (DPP3) is a ubiquitously expressed Zn-dependent protease, which plays an important role in regulating endogenous peptide hormones, such as enkephalins or angiotensins. In previous biophysical studies, it could be shown that substrate binding is driven by a large entropic contribution due to the release of water molecules from the closing binding cleft. Here, the design, synthesis and biophysical characterization of peptidomimetic inhibitors is reported, using for the first time an hydroxyethylene transition-state mimetic for a metalloprotease. Efficient routes for the synthesis of both stereoisomers of the pseudopeptide core were developed, which allowed the synthesis of peptidomimetic inhibitors mimicking the VVYPW-motif of tynorphin. The best inhibitors inhibit DPP3 in the low μM range. Biophysical characterization by means of ITC measurement and X-ray crystallography confirm the unusual entropy-driven mode of binding. Stability assays demonstrated the desired stability of these inhibitors, which efficiently inhibited DPP3 in mouse brain homogenate.     

Pore Development during the Carbonization Process of Lignin Microparticles Investigated by Small Angle X-ray Scattering

Application of low-cost carbon black from lignin highly depends on the materials properties, which might by determined by raw material and processing conditions. Four different technical lignins were subjected to thermostabilization followed by stepwise heat treatment up to a temperature of 2000 °C in order to obtain micro-sized carbon particles. The development of the pore structure, graphitization and inner surfaces were investigated by X-ray scattering complemented by scanning electron microscopy and FTIR spectroscopy. Lignosulfonate-based carbons exhibit a complex pore structure with nanopores and mesopores that evolve by heat treatment. Organosolv, kraft and soda lignin-based samples exhibit distinct pores growing steadily with heat treatment temperature. All carbons exhibit increasing pore size of about 0.5–2 nm and increasing inner surface, with a strong increase between 1200 °C and 1600 °C. The chemistry and bonding nature shifts from basic organic material towards pure graphite. The crystallite size was found to increase with the increasing degree of graphitization. Heat treatment of just 1600 °C might be sufficient for many applications, allowing to reduce production energy while maintaining materials properties.     

Synthese und Struktur von γ-Halogenpropyl-octa(silasesquioxanen)

Synthesis and Structures of γ-Halopropyl-octa(silasesquioxanes) As a more rapid and versatile synthetic approach, we have studied the FeCl₃-catalyzed hydrolytic polycondensation of suited trichlorosilanes in a biphasic system which yields e.g. the new octa(silasesquioxane) (BrCH₂CH₂CH₂)₈Si₈O₁₂.     

Functionalization of single-walled carbon nanotubes via the Bingel reaction

Single-walled carbon nanotubes have been cyclopropanated under Bingel reaction conditions, and the functionalized nanotubes have been characterized by atomic force microscopy using "chemical tagging" techniques.