Fully biodegradable polymeric micelles based on hydrophobic‐ and hydrophilic‐functionalized poly(lactide) block copolymers

Novel amphiphilic diblock copolymers from a combination of hydrophobic‐functional poly(lactides) (PLAs) with hydrophilic‐functional PLAs or poly(malic acid), respectively, toward fully biodegradable materials for medical applications, such as micellar drug delivery systems, are reported for the first time. The presented PLA‐based polymeric micelles are characterized by their small size below 100 nm, low critical micellar concentrations, good in vitro stabilities at room and body temperature, and efficient incorporation capability of hydrophobic compounds, particularly with regard to potential drug substances. Moreover, the advantage of being totally degradable with different rates at different pH values, as investigated in medical cancer treatment, is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3244–3254, 2010     

Development and validation of capillary zone electrophoresis and high-performance liquid chromatography methods for the determination of oral anticoagulant edoxaban in pharmaceutical tablets

The incidence of thrombotic complications in SARS-CoV-2 infections has become a global concern; thus, anticoagulants are an integral part of the treatment. Edoxaban (EDX) is an oral anticoagulant suitable for pharmacologic thromboprophylaxis. Herein, two novel analytical methods for EDX determination in tablets are developed and validated using capillary zone electrophoresis (CZE) and high-performance liquid chromatography (HPLC). Operating conditions such as the electrolyte's concentration and pH value, injection time, volume, and the capillary temperature, were optimized. The methods were successfully validated by establishing the linearity, intra- and inter-day precisions (relative standard deviation [%]), accuracy, and robustness. Adequate separation of excipients and degradation products of EDX generated by stress degradation conditions demonstrated the stability-indicating capability of the methods. The analytical procedures were linear in the range of 25–125 µg/ml (r > 0.999), with the limits of detection and quantification of 3.26 and 10.87 µg/ml for CZE and 0.740 and 2.78 µg/ml for HPLC. Although both methodologies are suitable for determining EDX in tablets, CZE provides a greener alternative due to low-cost analysis using less organic solvents and minimizing waste generation.     

Impact of Intermolecular Non-Covalent Interactions in a CuI8PdII1 Discrete Assembly: Conformers’ Geometries and Stimuli-Sensitive Luminescence Properties

A new highly solid-state luminescent phase of a previously reported weakly luminescent Cu^I₈Pd^II₁ dicationic assembly is reported revealing the high geometrical versatility of this moiety that importantly alters its luminescent properties. This very minor new species B_c is based on a different conformer scaffold than the one encountered in the previously reported B_o form and, essentially differs from B_o by displaying shorter Cu^I-Cu^I intermetallic distances. DFT calculations allow concluding that the predominance in the solid-state of the weakly luminescent and less stable B_o phase is due to the extra stability induced by a larger number of intermolecular non-covalent π-CH interactions in its crystalline packing and not by the intrinsic stability of the Cu^I₈Pd^II₁ dicationic moiety. Calculations also revealed that a more stable conformation B_calc is expected in vacuum, which bears a different distribution of Cu^I-Cu^I intermetallic distances than the dications in B_o and B_c phases. Taking into account that the geometrical alterations are associated to drastic changes of luminescence properties, this confer to the Cu^I₈Pd^II₁ assembly high potentiality as stimuli-sensitive luminescent materials. Indeed, by applying mechanical or thermal stress to samples of B_o phase, new phases B_g and B_m , respectively, were obtained. Alterations of the solid-state photophysical properties of these new species compared to those recorded for B_o are reported together with a combined experimental and computed study of the structures/properties relationships observed in these phases.     

X‐ray fluorescence induced by standing waves in the grazing‐incidence and grazing‐exit modes: study of the Mg–Co–Zr system

The characterization of Mg–Co–Zr tri‐layer stacks using X‐ray fluorescence induced by X‐ray standing waves, in both the grazing‐incidence (GI) and the grazing‐exit (GE) modes, is presented. The introduction of a slit in the direction of the detector improves the angular resolution by a factor of two and significantly improves the sensitivity of the technique for the chemical characterization of the buried interfaces. By observing the intensity variations of the Mg Kα and Co Lα characteristic emissions as a function of the incident (GI mode) or detection (GE mode) angle, it is shown that the interfaces of the Si/[Mg/Co/Zr]_×30 multilayer are abrupt, whereas in the Si/[Mg/Zr/Co]_×30 multilayer a strong intermixing occurs at the Co‐on‐Zr interfaces. An explanation of this opposite behavior of the Co‐on‐Zr and Zr‐on‐Co interfaces is given by the calculation of the mixing enthalpies of the Co–Mg, Co–Zr and Mg–Zr systems, which shows that the Co–Zr system presents a negative value and the other two systems present positive values. Together with the difference of the surface free energies of Zr and Co, this leads to the Mg/Zr/Co system being considered as a Mg/Co_xZr_y bi‐layer stack, with x/y estimated around 3.5.     

Enthalpy of absorption and limit of solubility of CO2 in aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol, 2-[2-(dimethyl-amino)ethoxy] ethanol,and 3-dimethyl-amino-1-propanol at T = (313.15 and 353.15) K and pressures up to 2 MPa

In order to study the influence of amine structure on absorption of carbon dioxide, enthalpies of solution of CO₂ in 2.50 mol · L^?1 aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol (THAM), 2-[2-(dimethyl-amino)ethoxy] ethanol (DMAEOE), and 3-dimethyl-amino-1-propanol (DMAP) were measured. The enthalpies of solution are determined as function of gas loading charge (moles of CO₂/mole of amine), at temperatures (313.15 and 353.15) K, and pressures range from (0.5 to 2) MPa. Measurements were carried out using a flow calorimetric technique. CO₂ solubilities in the aqueous solutions of amine are derived from calorimetric data. Molar volumes of aqueous amine solutions required to handle calorimetric data were determined at 303.15 K using a vibrating tube densimeter. Experimental enthalpies of solution are discussed on the basis of amines alkalinity.     

Permeability Improvement of Electropolymerized Polypyrrole Films in Water Using Magnetic Hydrophilic Microbeads

The electrochemical polymerization of polypyrrole films onto magnetically immobilized hydrophilic microbeads was carried out. Poly(pyrrole‐pyrene)‐microbeads coatings display thus higher permeability in water towards the diffusion of ferrocyanide than a pure poly(pyrrole‐pyrene) film. In addition, the modulation of this permeability through an applied magnetic field that attracts the microbeads on the electrode surface or pushes back them was shown. Moreover, a glucose biosensor was prepared by adsorbing and electropolymerizing on a platinum electrode, an aqueous mixture containing glucose oxidase, amphiphilic pyrrole monomer and microbeads attracted by a magnet. The presence of microbeads inside the biocoating, markedly increases the biosensor performance.     

An Efficient Strategy to Drive Nanoparticles into Carbon Nanotubes and the Remarkable Effect of Confinement on Their Catalytic Performance

Are you in? Bimetallic PtRu nanoparticles have been selectively confined inside or deposited outside carbon nanotubes (see picture). The confined nanoparticles display significantly higher selectivity and catalytic activity in hydrogenation reactions.

     

Coupling between polysaccharide gelation and micro-phase separation of globular protein clusters

The effect of gelation of the polysaccharide phase on the phase separation was investigated for mixtures of anionic polysaccharide (kappa-carrageenan) and globular protein (beta-lactoglobulin) clusters at pH 7 well above the iso-electric point. Gelation of kappa-carrageenan was induced by cooling in the presence of KCl. In the liquid state the protein clusters phase-separate into relatively dense micro-domains. When the polysaccharide phase gelled during cooling, the turbidity of the systems decreased dramatically. Light scattering experiments showed that the density of the micro-domains decreased, while microscopy showed that the number and size was not strongly modified. It is concluded that smaller protein clusters leave the micro-domains when kappa-carrageenan gels. The effect could be reversed by reheating the samples and thus melting the gel and was observed for repeated heating and cooling cycles. The effect of gelation on phase separation decreases with increasing polysaccharide concentration and with ageing of the liquid mixture. The latter is caused by the formation of bonds between the protein clusters in the micro-domains that slowly reinforce with time.     

Hydrazone- and hydrazide-containing N-substituted glycines as peptoid surrogates for expedited library synthesis: application to the preparation of Tsg101-directed HIV-1 budding antagonists

Replacing the Pro6 in the p6(Gag)-derived 9-mer "P-E-P-T-A-P-P-E-E" with N-substituted glycine (NSG) residues is problematic. However, incorporation of hydrazone amides ("peptoid hydrazones") can be readily achieved in library fashion. Furthermore, reduction of these hydrazones to N-substituted "peptoid hydrazides" affords a facile route to library diversification. This approach is demonstrated by application to Tsg101-binding compounds designed as potential HIV budding antagonists. [reaction: see text]