Capillary zone electrophoresis for analysis of phytochelatins and other thiol peptides in complex biological samples derivatized with monobromobimane

A new method to improve the analysis of phytochelatins and their precursors (cysteine, gamma-Glu-Cys, and glutathione) derivatized with monobromobimane (mBrB) in complex biological samples by capillary zone electrophoresis is described. The effects of the background electrolyte pH, concentration, and different organic additives (acetonitrile, methanol, and trifluoroethanol) on the separation were studied to achieve optimum resolution and number of theoretical plates of the analyzed compounds in the electropherograms. Optimum separation of the thiol peptides was obtained with 150 mM phosphate buffer at pH 1.60. Separation efficiency was improved when 2.5% v/v methanol was added to the background electrolyte. The electrophoretic conditions were 13 kV and capillary dimensions with 30 cm length from the inlet to the detector (38 cm total length) and 50 microm inner diameter. The injection was by pressure at 50 mbar for 17 s. Under these conditions, the separation between desglycyl-peptides and phytochelatins was also achieved. We also describe the optimum conditions for the derivatization of biological samples with mBrB to increase electrophoretic sensitivity and number of theoretical plates. The improved method was shown to be simple, reproducible, selective, and accurate in measuring thiol peptides in complex biological samples, the detection limit being 2.5 microM glutathione at a wavelength of 390 nm.     

Rearrangement of 3-methoxy substituted [2, 1]benzisoxazole- and naphth[2,3-c]isoxazolequinones in dimethyl sulfoxide solution

The reactions of the 3-methoxy-isoxazole quinones 1 and 9 in a highly polar solution of dimethyl sulfoxide have been studied. Quinones of type 2, 4/11, 5/12, 6 and 7/13 have been isolated; nmr measurements give a detailed insight into the reaction mechanism.     

Formation of a Tc(III)-adenosine diphosphate complex

A⁹⁹Tc-ADP complex was prepared when KTcO₄ was reduced in aquous medium by SnCl₂, Na₂S₂O₄, NaBH₄ or Zn in the presence of ADP in excess. The resulting solution was studied by chromatography and spectrophotometry. Electrochemical reduction and substitution on [Tc^III(tu)₆]³⁺ were investigated as alternative synthetic routes. The anionic Tc-ADP complex was isolated as a solid. Cerimetric titrations confirmed the oxidation state +3 for the central atom. IR and¹H-NMR data showed that the purine base is bonded to the Tc central atom but not the ribose moiety. No oxo groups seemed to be directly bonded to the Tc atom. The complex is rather stable in neutral solutions. However, it decomposes to pertechnetate and TcO₂ at extreme pH values.     

Selective hydrogenation and dehydrocyclization of 3-methyl-4-benzyl-2,6-diphenylpyridine

3-Methyl-4-benzyl-2,6-diphenylpiperidine was obtained by hydrogenation of 3-methyl-4-benzyl-2,6-diphenylpyridine in the presence of rhenium heptasulfide; this confirms the common character of the method of selective hydrogenation of aryl(aralkyl)-substituted pyridine bases to give similarly substituted piperidines. Dehydrocyclization of this pyridine base by heating with sulfur leads to 10-mercapto-1,3-diphenyl-2-azaanthracene, which was obtained under the same conditions from 1,2-diphenyl-1,2-bis(3-methyl-2,6-diphenyl-4-pyridyl)ethane.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 375–376, March, 1982.     

Defect concentration in Ti-substituted YIG from TG curves

The article discusses theory and experiment about the measurement of defect concentration in Ti-substituted yttrium iron garnet by means of thermogravimetry techniques. The two possible cases arising from oxygen interchange with atmosphere, oxygen vacancies and interstitial cations, may be analyzed quantitatively from the derived expressions. The possibility of another type of defects being present in the samples, not associated to oxygen evolution, is not excluded. Measurements were carried out in air and CO₂ for different Ti contents. The substitution tends to increase slightly the defect parameter θ in YIG, while a CO₂ reducing atmosphere is much more effective than the Ti substitution for increasing θ. Calculations for a given single-phased sample sintered in air show two possibilities: a deficit of one oxygen atom for every 2.5 unit cells of 96 atoms, or one excess cation for every 3.5 cells. Other samples show very similar results. The accuracy involved in the measurements is about 2–3%.     

In situ preparation of protein-"smart" polymer conjugates with retention of bioactivity

Protein-polymer conjugates are widely used in biotechnology and medicine, and new methods to prepare the bioconjugates would be advantageous for these applications. In this report, we demonstrate that bioactive "smart" polymer conjugates can be synthesized by polymerizing from defined initiation sites on proteins, thus preparing the polymer conjugates in situ. In particular, free cysteines, Cys-34 of bovine serum albumin (BSA) and Cys-131 of T4 lysozyme V131C, were modified with initiators for atom transfer radical polymerization (ATRP) either through a reversible disulfide linkage or irreversible bond by reaction with pyridyl disulfide- and maleimide-functionalized initiators, respectively. Initiator conjugation was verified by electrospray-ionization mass spectroscopy (ESI-MS), and the location of the modification was confirmed by muLC-MSMS (tandem mass spectrometry) analysis of the trypsin-digested protein macroinitiators. Polymerization of N-isopropylacrylamide (NIPAAm) from the protein macroinitiators resulted in thermosensitive BSA-polyNIPAAm and lysozyme-polyNIPAAm in greater than 65% yield. The resultant conjugates were characterized by gel electrophoresis and size exclusion chromatography (SEC) and easily purified by preparative SEC. The identity of polymer isolated from the BSA conjugate was confirmed by (1)H NMR, and the polydispersity index was determined by gel permeation chromatography (GPC) to be as low as 1.34. Lytic activities of the lysozyme conjugates were determined by two standard assays and compared to that of the unmodified enzyme prior to polymerization; no statistical differences in bioactivity were observed.     

Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Stabilization of a standard gas mixture generator with diffusion tubes

Summary The generator contains diffusion tubes of known length and internal diameter. Once produced, the mixture of the carrier gas and acetone, the reference material, is sent through a chromatographic flame ionisation detector. Its signal reaches a constant level after a time corresponding to the stabilization time of the generator. The technique described is simple and gives repeatable results.     

A study of [Co2(alkyne)(binap)(CO)4] complexes (BINAP=(1,1'-binaphthalene)-2,2'-diylbis(diphenylphosphine))

Understanding the interaction of chiral ligands, alkynes, and alkenes with cobaltcarbonyl sources is critical to learning more about the mechanism of the catalytic, asymmetric Pauson-Khand reaction. We have successfully characterized complexes of the type [Co2(alkyne)(binap)(CO)4] (BINAP=(1,1'-binaphthalene)-2,2'-diylbis(diphenylphosphine)) and shown that diastereomer interconversion occurs under Pauson-Khand reaction conditions when alkyne=HC[triple bond]CCO2Me. Attempts to isolate [Co2(alkyne)(binap)(CO)x] complexes with coordinated alkenes led to the formation of cobaltacyclopentadiene species.