Formation of internally nanostructured triblock copolymer particles

Particles with an internal structure have been found in dilute water solutions of a triblock copolymer of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which has short hydrophilic PEO endblocks compared to the central hydrophobic PPO block (EO5PO68EO5, L121). The properties of the block copolymer particles (i.e., their structure, size, and time stability) have been investigated using cryogenic transmission electron microscopy (cryo-TEM) in combination with dynamic light scattering (DLS) and turbidity measurements. The particles were formed in dilute solutions by quenching the temperature to temperatures where the reversed hexagonal phase is in equilibrium with a solution of unaggregated L121 copolymers (L1). From the DLS measurements, a mean hydrodynamic radius of 158 nm was extracted. The time-scan turbidity measurements were found to be unchanged for about 46 h. At higher copolymer concentrations, a reversed hexagonal phase (H2) exists in the L121/water system. SAXS was used to investigate the internal structure of the dispersed L121-based particles containing 15 wt % L121. It was found that the internal structure transforms from H2 to an inverse micellar system (L2) as the temperature increases from 37 to 70 degrees C.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.     

Synthesis and Reactivity of Stannyloligosilanes IV [1]: From Hydrido Substituted Stannasilanes Towards Stannasiloxanes

Summary.  Hydrido substituted stannasilanes of the type or (Z = H, Me, Ph; R, R′ = alkyl, Ph) are accessible by reaction of either alkali metal stannides (MSn(Z)R ₂; M = Li, Na) with halogen substituted silanes (; X = F, Cl) or chlorostannanes (R ₂SnCl₂, Ph₃SnCl) and fluorosilanes in the presence of magnesium. Stannasilanes with halogen substituents at the silicon as well as the tin atom are formed by treatment of the hydrido substituted stannasilanes with CHCl₃ or CCl₄. The hydrido substituted stannasilanes decompose in contact with air to distannanes and siloxanes or to the linear ( ^t Bu₂Sn(–O– ^t Bu₂Si–OH)₂) and cyclic ((– ^t Bu₂Sn–O– ⁱ Pr₂Si–O–)₂) stannasiloxanes. Received November 29, 2001. Accepted (revised) January 16, 2002     

Comparative study of anionic and radical cyclization for the preparation of 1,3-dimethylindans: highly stereoselective preparation of cis-1,3-disubstituted indans via intramolecular carbolithiation

[reaction: see text] The preparation of 1,3-dimethylindans from 4-(2-bromophenyl)-1-pentene (1) and 2-(2-iodo-1-methylethyl)styrene (2) substrates via radical-mediated cyclization and intramolecular carbolithiation has been investigated. Although cyclization of the radical derived from either substrate proceeds with modest selectivity for the cis-isomer, as does cycloisomerization of the aryllithium derived from substrate 1 (cis/trans approximately 2), intramolecular cyclization of the alkyllithium derived from substrate 2 is a highly cis-selective process (cis/trans = 12).     

Ultraviolet B Wavelength Dependence for the Regulation of Two Major Matrix-Metalloproteinases and Their Inhibitor TIMP-1 in Human Dermal Fibroblasts

Abstract— The wavelength dependence for the regulation of two major matrix-metalloproteinases, interstitial collagenase (MMP-1) and stromelysin-1 (MMP-3), and their major inhibitor, tissue inhibitor of metalloproteinases (TIMP-1), was studied in human dermal fibroblasts in vitro. Monochromatic irradiation at 302, 307, 312 and 317 nm with intensities ranging from 20 to 300 J/m² increased MMP-1 and MMP-3 mRNA steady-state levels and the secretion of the corresponding proteins up to 4.4-fold, whereas almost no increase was observed at wavelengths <290 nm. In contrast, the synthesis of TIMP-1 increased only marginally. This unbalance may contribute to the severe connective tissue damage related to photoaging of the skin. The wavelengths responsible for MMP-1 and MMP-3 induction reported here are distinct from the absorption spectrum of DNA and are different from results previously reported in the literature. Importantly, they overlap with wavelengths whose intensity is predicted to increase on the earth's surface upon ozone depletion. Intensities and particular wavelengths used in our studies in vitro can be absorbed readily by fibroblasts within the skin in vivo and, thus, are relevant for risk assessment and development of protective agents.     

Electrochemical solid-phase microextraction of anions and cations using polypyrrole coatings and an integrated three-electrode device

A method for the extraction, transfer and desorption of anions and cations under controlled potential conditions employing a new integrated three-electrode device is described. The device, containing working, reference and counter electrodes, was prepared from tubes that could be moved vertically with respect to each other. In this way, a small amount of solvent, held by capillary force, remained between the electrodes when the device was lifted out of a solution after an extraction. This design allowed the potential control to be maintained at all times. With the new integrated device, it was possible to perform potential controlled desorption into vials containing as little as 200 microl of solution. The required ion exchange capacity was obtained by electrodeposition of a polypyrrole coating on the surface of the glassy carbon working electrode. Solid-phase microextractions of several cations or anions were performed simultaneously under potentiostatic control by doping the polypyrrole coating with different anions such as perchlorate and p-toluenesulfonate. The efficiency of the extractions, which could be altered by varying the potential of the working electrode, could be increased by 150 to 200% compared to extractions using normal solid-phase microextraction conditions under open circuit conditions. A constant potential of +1.0 V and -0.5 V with respect to the silver pseudo reference electrode, was found to be well-suited for the extraction of samples containing ppm concentrations of anions (chloride, nitrite, bromide, nitrate, sulfate and phosphate) and cations (cadmium, cobalt and zinc), respectively.     

Das chlorsilylsubstituierte Silanimin Bu2SiNSiClBu2

In the thermolysis of the silaterazolines silatetrazoline ^tBu₂SiNSiCl^tBu₂ · ^tBu₃SiN₃ the silanimine ^tBu₂SiNSiCl^tBu₂ and the silyl azide ^tBu₃SiN₃ are formed quantitatively. The silanimine ^tBu₂SiNSiCl^tBu₂ has been trapped with Et₃NHF, Me₃NHCl, water, 1-butene, 2,3-dimethyl-1,3-butadiene, isobutene, methylvinyl ether, and ^tBu₂SiClN₃. The structure of the disiloxane (^tBu₂SiCl-NH-Si^tBu₂)₂O and of the bis(di-tert-butylchlorsilyl)-substituted silatetrazoline ^tBu₂SiNSiCl^tBu₂ · ^tBu₂SiClN₃ has been determined by X-ray structure analysis.     

Final elucidation of the absolute configuration of the signal metabolite hormaomycin

The complete absolute configuration of hormaomycin 1 a has been established by HPLC and HPLC/MS experiments with appropriately derivatized 4-propylprolines, (2S,4S)-6 and (2R,4R)-6, as well as 4-(Z)-propenylprolines, cis-5 and trans-5, and also feeding experiments with enantiomerically pure samples of the deuterium-labeled 3-(2'-nitrocyclopropyl)alanine, (2S)-3,3-[D2]15 and (2S)-2,2'-[D2]15, and 4-(Z)-propenylproline 2',4-[D2]-(2S,4R)-5. The latter five amino acids were prepared for the first time and allowed one to unequivocally assign the hitherto unknown absolute configurations of the last four stereocenters in hormaomycin 1 a. As a bonus, some new information about the biosynthesis of this molecule has also been gathered.     

Method for immobilization of liposomes in capillary electrophoresis by electrostatic interaction with derivatized agarose

A novel procedure for immobilization of liposomes inside fused-silica capillaries is demonstrated. First, the inner wall of the capillaries was coated with a positively charged polymer, composed of derivatized agarose. Subsequently, negatively charged liposomes were immobilized by electrostatic interaction on the polymer coating. The developed liposome coated capillaries were used as a nanoseparation tool for studying interactions between small drug compounds and liposomes. Part of this work was presented at the 15th International Symposium on Microscale Separations and Analysis, HPCE 2002, Stockholm, Sweden, April 2002.