Tailor-made functionalization of silicon nitride surfaces

This communication presents the first functionalization of a hydrogen-terminated silicon-rich silicon nitride (Si3Nx) surface with a well-defined, covalently attached organic monolayer. Properties of the resulting monolayers are monitored by measurement of the static water contact angle, X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRRAS). Further functionalization was performed by reaction of Si3Nx with a trifluoroethanol ester alkene (CH2=CH-(CH2)8CO2CH2CF3) followed by basic hydrolysis to afford the corresponding carboxylic acid-terminated monolayer with hydrophilic properties. These results show that Si3Nx can be functionalized with a tailor-made organic monolayer, has highly tunable wetting properties, and displays significant potential for further functionalization.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Phosphinerhodium complexes as homogeneous catalysts : VIII. Enantioselective hydrogenation of ketones: evidence for several mechanisms with catalysts containing diop

Optical yields obtained in the hydrogenation of acetophenone with cationic and in situ rhodium complex catalysts depend on the P/Rh ratio and on the ionic or non-ionic character of the active species. The enantioselectivity of the in situ catalyst containing (+)-DIOP is reversed by addition of achiral tri-n-alkyl-phosphines. On the basis of these observations and the amount of H₂ consumed in preforming the catalysts, several different mechanisms are suggested: for example: cycles involving cationic rhodium complexes containing two (or three) phosphorus ligands and cycles involving non-ionic rhodium complexes with two phosphorus ligands in cis or trans positions. In the in situ catalyst with a Rh/(+)-DIOP/P-n-Bu₃  1/1/1 ratio (+)-DIOP functions as a monodentate ligand.     

A novel group of alkaline earth metal amides: syntheses and characterization of M[N(2,6-(i)Pr(2)C(6)H(3))(SiMe(3))](2)(THF)(2) (M = Mg,Ca, Sr,Ba) and the linear,two-coordinate Mg[N(2,6-(i)Pr(2)C(6)H(3))(SiMe(3))](2)

Novel alkaline earth metal aryl-substituted silylamides were prepared using alkane (Mg) and salt elimination reactions (Mg, Ca, Sr, and Ba). The salt elimination regime involved the treatment of the alkaline earth metal iodides with 2 equiv of the respective potassium amide KNDiip(SiMe(3)), (Diip = 2,6-i-Pr(2)C(6)H(3)). The organomagnesium source for the alkane elimination was ((n)()Bu/(s)()Bu)(2)Mg. All compounds were characterized using (1)H, (13)C NMR, and IR spectroscopy, in addition to X-ray crystallography (except Mg[NDiip(SiMe(3))](2)THF(2)). Crystal data with Mo Kalpha (lambda = 0.710 73 A) are as follows: Mg[NDiip(SiMe(3))](2), 1, a = 9.4687(6) A, b = 9.6818(6) A, c = 17.9296(1) A, alpha = 96.487(1) degrees, beta = 94.537(1) degrees, gamma = 89.222(1) degrees, V = 1608.8(2) A(3), Z = 2 (two independent molecules), triclinic, space group P(-)1, R1 (all data) = 0.0508; (n)()BuMg[NDiip(SiMe(3))]THF(2), 2, a = 9.5413(1) A, b = 16.493(2) A, c = 9.8218(1) A, beta = 108.149(2) degrees, V = 1468.7(4) A(3), Z = 2, monoclinic, space group P2(1), R1(all data) = 0.1232; Ca[NDiip(SiMe(3))](2)THF(2), 4, a = 9.7074(1) A, b = 20.9466(4) A, c = 21.6242(3) A, alpha = 73.573(1) degrees, beta = 78.632(1) degrees, gamma = 89.621(1) degrees, V = 4129.1(1) A(3), Z = 4 (two independent molecules), triclinic, space group P(-)1, R1 (all data) = 0.0902; Sr[NDiip(SiMe(3))](2)THF(2), 5, a = 20.5874(5) A, b = 9.8785(2) A, c = 20.8522(5) A, beta = 102.035(2) degrees, V = 4147.6(2) A(3), Z = 4 (two independent molecules), monoclinic, space group P2/n, R1 (all data) = 0.0756; Ba[NDiip(SiMe(3))](2)THF(2), 6, a = 20.5476(2) A, b = 10.0353(2) A, c = 20.9020(4) A, beta = 101.657(1) degrees, V = 4221.0(1) A(3), Z = 4 (two independent molecules), monoclinic, space group P2/n, R1 (all data) = 0.0573.     

Copolymeric (lR-trans)-N,N'-1,2-cyclohexylene-bisbenzamide oligodimethylsiloxane chiral stationary phase for gas chromatography

A copolymeric stationary phase, consisting of a chiral selective part, i.e. (1R-trans)-N,N'-1,2-cyclohexylenebisbenzamide, and an efficient siloxane oligomeric part, was successfully applied to open tubular column GC analysis. The efficiency and the chiral selectivity of this stationary phase were studied in detail, and high capacity and efficiency at elevated GC temperatures were especially noted. Several drugs and other enantiomeric pairs were separated. The shown examples demonstrate a broad application range for this type of chiral stationary phase in GC analysis.     

Formation of internally nanostructured triblock copolymer particles

Particles with an internal structure have been found in dilute water solutions of a triblock copolymer of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which has short hydrophilic PEO endblocks compared to the central hydrophobic PPO block (EO5PO68EO5, L121). The properties of the block copolymer particles (i.e., their structure, size, and time stability) have been investigated using cryogenic transmission electron microscopy (cryo-TEM) in combination with dynamic light scattering (DLS) and turbidity measurements. The particles were formed in dilute solutions by quenching the temperature to temperatures where the reversed hexagonal phase is in equilibrium with a solution of unaggregated L121 copolymers (L1). From the DLS measurements, a mean hydrodynamic radius of 158 nm was extracted. The time-scan turbidity measurements were found to be unchanged for about 46 h. At higher copolymer concentrations, a reversed hexagonal phase (H2) exists in the L121/water system. SAXS was used to investigate the internal structure of the dispersed L121-based particles containing 15 wt % L121. It was found that the internal structure transforms from H2 to an inverse micellar system (L2) as the temperature increases from 37 to 70 degrees C.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.     

Distorted five-fold coordination of Cu2+(aq) from a Car-Parrinello molecular dynamics simulation

The solvation shell structure and dynamics of a single Cu2+ ion in a periodic box with 32 water molecules under ambient conditions has been investigated using Car-Parrinello molecular dynamics simulations in a time-window of 18 ps. Five-fold coordination with four equidistant equatorial water molecules at 2.00 A and one axial water molecule at 2.45 A from the Cu2+ ion is found. A "hole" without water molecules is found on the opposite side of the axial water. The ion-water bonding character for the equatorial water molecules is different from that of the axial water molecules, as shown by a localized orbital analysis of the electronic structure. Moreover, the calculated OD stretching vibrational band for the equatorial water molecules lies ca. 175 cm-1 below the axial-water band, in good agreement with experimental data. The equatorial-water band lies below, and the axial-water band above, the pure liquid D2O band, also in agreement with experimental data.