A chemometric study of active parameters and their interaction effects in a nebulized sheath-liquid electrospray interface for capillary electrophoresis-mass spectrometry

A chemometrics approach has been used for evaluating the effect of four experimental parameters when coupling capillary electrophoresis (CE) to electrospray ionization-mass spectrometry (ESI-MS). Electrospray voltage, sheath-liquid flow rate, nebulizing gas flow rate, and spray needle position in respect to the MS orifice were varied according to a full factorial design. In addition to main effects, two interaction effects could be identified as significant when measuring the peak intensity of the analytes, from a sample mixture containing peptides and pharmaceuticals. The first interaction effects, between the nebulizing gas flow rate and the sheath-liquid flow rate, and the second interaction effect, between the nebulizing gas flow rate and the spray position, could further explain the impact that these variables have on the spray performance. The number of theoretical plates and the baseline noise were also measured. The sheath-liquid flow was found to significantly affect the separation efficiency, while the noise level mainly was controlled by the nebulizing gas flow. The same factorial design was also used for a CE capillary with lower internal diameter (ID) and the effects of the same variables were compared on those capillaries using equal injection volume for both capillaries. Similar trends were obtained in both capillaries but capillary ID was shown to be a significant variable when evaluating both capillaries in a single model. It was found that a capillary with 25 microm ID provided improved CE-MS performance over than corresponding 50 microm ID capillary. Enhanced sensitivity was obtained using the narrow-bore capillary, and at lower sheath-liquid flow rate the 25 microm ID capillary also gave rise to more efficient peaks.     

Advanced flicker spectroscopy of fluid membranes

The bending elasticity of a fluid membrane is characterized by its modulus and spontaneous curvature. We present a new method, advanced flicker spectroscopy of giant nonspherical vesicles, which makes it possible to simultaneously measure both parameters for the first time. Our analysis is based on the generation of a large set of reference data from Monte Carlo simulations of randomly triangulated surfaces. As an example of the potential of the procedure, we monitor thermal trajectories of vesicle shapes and discuss the elastic response of zwitterionic membranes to transmembrane pH gradients. Our technique makes it possible to easily characterize membrane curvature as a function of environmental conditions.     

Nonribosomal peptides: from genes to products

The ability to synthesize nonribosomally small bioactive peptides that find application in modern medicine is widely spread among microorganisms. As broad as the spectrum of biological activities is the structural diversity of these peptides, which are mostly cyclic or branched cyclic compounds containing non-proteinogenic amino acids, small heterocyclic rings and other unusual modifications in the peptide backbone. They are synthesized by multimodular enzymes, the so-called nonribosomal peptide synthetases (NRPSs), from simple building blocks. Biochemical and genetic studies have unveiled the key principles of nonribosomal peptide syntheses, as well as the realization of many structural features of these peptides. This review focuses on recent results in NRPS research and highlights how this knowledge can be exploited for biotechnological purposes. In addition, possibilities and limitations for prediction of structural features of uncharacterized NRPSs and approaches for their engineering are discussed.     

Waves and rays in uniaxial birefringent crystals

In this paper, we present a more elaborate and complete way of the formalism that we have developed in successive steps for ray tracing through uniaxial birefringent media in view of the optical design. With the obtained formulas we analyze in detail what we see through a cleavage calcite crystal.     

Synthesis of β-Glucuronides of Estradiol,Ethynylestradiol and Estrone

ABSTRACT

Improved syntheses for the 3-β-D-glucuronides of the steroidal sex hormones 17β-estradiol, 17α-ethynylestradiol and estrone are reported employing boron trifluoride diethyl etherate catalysis with tetraacetylated glucuronic acid or the corresponding imidate.     

Effects of grating order and tooth rounding in laterally coupled distributed feedback lasers

We demonstrate the results of an analysis of laterally coupled distributed feedback (LC-DFB) lasers with higher order gratings, including the effects of radiating partial waves. For a given fabrication resolution, first-order gratings, if they can be reliably manufactured, always provide the strongest coupling. However, at resolutions requiring higher order gratings, if duty cycles of >0.5 are used, the lowest grating order is not always the one with the strongest coupling. An analysis of the rounding of the grating teeth showed that the required threshold gain was increased by nearly 20% when the rectangular grating was rounded in fabrication.     

Determination of palladium in gasoline by neutron activation analysis and automated column extraction

^? Palladium in gasoline was determined by means of neutron activation analysis (NAA) and selective sorbent extraction. Unleaded gasoline consistent with DIN EN 228, RON 95 was irradiated at a thermal neutron flux of Φ_th = 1.68 · 10¹³s^–1cm^–2 and an epithermal neutron flux of 3.32 · 10¹¹s^–1cm^–2 for t_irr = 12 h. The irradiated gasoline was digested with nitric acid and palladium was then separated as N,N-diethyl-N’-benzoylthiourea complex by an automated column pre-concentration procedure. The eluate of 50 μL was dried on a filter paper and the 88.03 keV photons resulting from the decay of ¹⁰⁹Pd were detected in a low level HPGe spectrometer with an efficiency of 35.5%. Severe interferences with other matrix constituents, especially ⁸²Br could be overcome and the detection limit for palladium was improved to 3.4 ng/L at a confidence level of 90%. Although the analytical procedure applied yielded the lowest detection limit for palladium obtained in gasoline up to now, no indications for the presence of palladium were found.     

Associativity of the <Emphasis Type="Italic">∇</Emphasis>-operation on bands in rings

Given a multiplicative band of idempotents S in a ring R, for all e,f∈S the ∇-product e ∇ f=e+f+fe−efe−fef is an idempotent that lies roughly above e and f in R just as ef and fe lie roughly below e and f. In this paper we study ∇-bands in rings, that is, bands in rings that are closed under ∇, giving various criteria for ∇ to be associative, thus making the band a skew lattice. We also consider when a given band S in R generates a ∇-band.     

Precision synthesis of microstructures in star‐shaped copolymers of ϵ‐caprolactone,L‐lactide,and 1,5‐dioxepan‐2‐one

Star‐shaped homo‐ and copolymers were synthesized in a controlled fashion using two different initiating systems. Homopolymers of ε‐caprolactone, L ‐lactide, and 1,5‐dioxepan‐2‐one were firstly polymerized using (I) a spirocyclic tin initiator and (II) stannous octoate (cocatalyst) together with pentaerythritol ethoxylate 15/4 EO/OH (coinitiator), to give polymers with identical core moieties. Our gained understanding of the versatile and controllable initiator systems kinetics, the transesterification reactions occurring, and the role which the reaction conditions play on the material outcome, made it possible to tailor the copolymer microstructure. Two strategies were used to successfully synthesize copolymers of different microstructures with the two initiator systems, i.e., a more multiblock‐ or a block‐structure. The correct choice of the monomer addition order enabled two distinct blocks to be created for the copolymers of poly(DXO‐co‐LLA) and poly(CL‐co‐LLA). In the case of poly(CL‐co‐DXO), multiblock copolymers were created using both systems whereas longer blocks were created with the spirocyclic tin initiator. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1249–1264, 2008