Screening of microdialysates taken before and after induced liver damage; on-line solid phase extraction-electrospray ionization-mass spectrometry

A novel method is described to follow known and unknown compounds in biological processes using microdialysis sampling and mass spectrometric detection. By implementation of internal standard, desalting/enrichment for the sample work-up, and multivariate data analysis, this methodology is a basis for future applications in early diagnosis of diseases and organ damage, as a complement to the routinely used clinical methods for biological samples. The present study includes screening without specific target analytes, of samples collected by microdialysis from liver of anaesthetized rats before and after local damage to this organ. Sample series were classified by principal component analysis, and the stimulation was identified in the chemical patterns produced by the presented analytical tool.     

Solvent and base dependence of copper-free palladium-catalyzed cross-couplings between terminal alkynes and arylic iodides: development of efficient conditions for the construction of gold(III)/free-base porphyrin dimers

In this paper, our attempts to optimize the Heck alkynylation (copper-free Sonogashira) reaction are presented. An efficient copper-free coupling protocol was needed for the synthesis of gold/zinc porphyrin dimers because previous methods had failed. Previous studies have usually focused on ligands, whereas this work focuses on the choice of solvent and base. The catalytic system throughout the investigation was formed from the stable precursor [Pd2(dba)3.CHCl3] together with the ligand triphenylarsine, an easy-to-handle, air-stable ligand. A model study was conducted to examine the dependence of the Heck alkynylation on the solvent and base. The most successful modification proved to be the addition of methanol, as a cosolvent, in combination with a nucleophilic tertiary base. The success of the methanol additive is hypothesized to be caused by the presence of a rate-determining deprotonation step featuring a charge-separated transition state. Finally, the very high yielding and successful synthesis of a series of porphyrin systems using these new conditions is presented. For the first time, gold porphyrin substrates could efficiently be coupled in Heck alkynylation reactions.     

New insight into the mechanism of action of wasp mastoparan peptides: lytic activity and clustering observed with giant vesicles

Antimicrobial peptides of the mastoparans family exert their bactericidal activity by binding to lipid membranes, inducing pores or defects and leaking the internal contents of vesicles and cells. However, this does not seem to be the only mechanism at play, and they might be important in the search for improved peptides with lower undesirable side effects. This work deals with three mastoparans peptides, Polybia-MP-1(MP-1), N2-Polybia-MP-1 (N-MP-1), and Mastoparan X (MPX), which exhibit high sequence homology. They all have three lysine residues and amidated C termini, but because of the presence of two, one, and no aspartic acid residues, respectively, they have +2, +3, and +4 net charges at physiological pH. Here we focus on the effects of these mastoparans peptides on anionic model membranes made of palmitoleyoilphosphatidylcholine (POPC) and palmitoleyoilphosphatidylglycerol (POPG) at 1:1 and 3:1 molar ratios in the presence and in the absence of saline buffer. Zeta potential experiments were carried out to measure the extent of the peptides' binding and accumulation at the vesicle surface, and CD spectra were acquired to quantify the helical structuring of the peptides upon binding. Giant unilamellar vesicles were observed under phase contrast and fluorescence microscopy. We found that the three peptides induced the leakage of GUVs at a gradual rate with many characteristics of the graded mode. This process was faster in the absence of saline buffer. Additionally, we observed that the peptides induced the formation of dense regions of phospholipids and peptides on the GUV surface. This phenomenon was easily observable for the more charged peptides (MPX > N-MP-1 > MP-1) and in the absence of added salt. Our data suggest that these mastoparans accumulate on the bilayer surface and induce a transient interruption to its barrier properties, leaking the vesicle contents. Next, the bilayer recovers its continuity, but this happens in an inhomogeneous way, forming a kind of ply with peptides sandwiched between two juxtaposed membranes. Eventually, a peptide-lipid aggregate forming a lump is formed at high peptide-to-lipid ratios.     

Metallophilic bonding and agostic interactions in gold(I) and silver(I) complexes bearing a thiotetrazole unit

Gold(I) and silver(I) complexes of 1-methyl-5-thio-tetrazole (1) have been prepared and the coordination chemistry of this ligand toward metal-phosphine frameworks has been explored. As indicated by IR and Raman data, ligand 1 is deprotonated and the resulted anion acts as a bidentate (S,N)-tetrazole-5-thiolato unit in the new gold(I) complexes, [Au(SCN(4)Me)(PPh(3))] (2), [{Au(SCN(4)Me)}(2)(μ-dppm)] (3), and [{Au(SCN(4)Me)}(2)(μ-dppe)] (4), while it is coordinated only through the sulfur atom as its neutral tetrazole-5-thione form in the silver(I) derivative, [Ag(HSCN(4)Me)(PPh(3))](2)(OTf)(2) (5). Further characterization of the new compounds was performed using multinuclear ((1)H, (13)C, (31)P, (19)F) NMR spectroscopy, mass spectrometry, and DSC measurements. Single-crystal X-ray diffraction studies revealed basically linear P-M-S arrangements in complexes 3-5. The bidentate (S,N) coordination pattern results in a T-shaped (S,N)PAu core in 3 and 4, whereas, in 5, a similar coordination geometry is achieved in the dimer association based on S-bridging ligand 1. Herein, weak (C)H···Au and (C)H···Ag agostic interactions were observed. An intramolecular Au···Au contact occurs in 3, while in 4 intermolecular aurophilic bonds lead to formation of a chain polymer. An intermolecular Ag···Ag contact is also present in the dimer unit of 5. Low-temperature (31)P NMR data for 5 evidenced the presence of monomer and dimer units in solution. Theoretical calculations on model of the complexes 2 and 4 are consistent with the geometries found by X-ray diffraction studies.     

Stereoselective synthesis of chiral, non-racemic 1,2,3-tri- and 1,3-disubstituted ferrocene derivatives

Chiral, non-racemic 1,2,3-trisubstituted ferrocene derivatives are accessible from monosubstituted ferrocenes through two sequential ortho-deprotonation reactions; removal of the central substituent gives 1,3-disubstituted ferrocenes.     

Conformational Parameters of the Sandalwood-Odor Activity: Conformational calculations on sandalwood odor

The conformational parameters responsible for sandalwood odor were investigated by the “active-analog approach”. The pharmacophoric (osmophoric) pattern of sandalwood-odor molecules can be outlined as three points: the OH group (point PI), a lipophilic group (point P2) 2.9–3.0 Å distant from the OH group, and a bulky rigid group (point P3), represented as a dummy atom in the middle of the alicyclic system (norbornane bicycle or cyclopentene ring) or a quaternary C-atom. This concept was tested on a series of representative sandalwood-odor compounds and on some structurally similar, but odorless substances.     

Fast chiral separation by ligand-exchange HPLC using a dynamically coated monolithic column

The preparation and application of dynamically coated ligand-exchange chromatography phases for enantioseparation is described. The phases were prepared by pumping a solution of N-decyl-L-4-hydroxyproline, N-hexadecyl-L-4-hydroxyproline, or N-2-hydroxydodecyl-L-4-hydroxyproline through a commercially available monolithic RP-18 column. These coatings are stable against desorption for months at ambient temperature when aqueous mobile phases are used. The columns were applied to the chiral separation of amino acids, glycyl dipeptides and diastereomeric dipeptides, and tripeptides. The chiral selector can be removed or changed easily by washing the column with ACN or methanol. Ultrafast separations in the range of seconds were achieved using high flow rates.     

Mixed micelles of a PEO-PPO-PEO triblock copolymer (P123) and a nonionic surfactant (C12EO6) in water. a dynamic and static light scattering study

The present article reports on static and dynamic light scattering (SLS and DLS) studies of aqueous solutions of the nonionic surfactant C12EO6 and the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO20PO68EO20 (P123) at temperatures between 25 and 45 degrees C. In water, P123 self-assembles into spherical micelles with a hydrodynamic radius of 10 nm, and at 40 degrees C, these micelles consist of 131 unimers. Addition of C12EO6 leads to an association of the surfactant molecules to the P123 micelles and mixed micelles are formed. The size and structure of the mixed micelles as well as interparticle interactions were studied by varying the surfactant-to-copolymer (C12EO6/P123) molar ratio. The novelty of this study consists of a composition-induced structural change of the mixed micelles at constant temperature. They gradually change from being spherical to polymer-like with increasing C12EO6 content. At low C12EO6/P123 molar ratios (below 12), the SLS measurements showed that the molar mass of the mixed micelles decreases with an increasing amount of C12EO6 in the micelles for all investigated temperatures. In this regime, the mixed micelles are spherical and the DLS measurements revealed a decrease in the hydrodynamic radius of the mixed micelles. An exception was found for C12EO6/P123 molar ratios between 2 and 3, where the mixed micelles become rodlike at 40 degrees C. This was the subject of a previous study and has hence not been investigated here. At high molar ratios (48 and above), the polymer-like micelles present a concentration-induced growth, similar to that observed in the pure C12EO6/water system.     

Structure and performance of silica-based monolithic HPLC columns

Silica-based monolithic columns were prepared for HPLC with systematic variations of the tetramethoxysilane (TMOS) and polyethylene oxide (PEO) content as reactants in a sol-gel process accompanied by phase separation. The resulting monoliths showed differences in the macropore and silica skeleton diameter as well as in the corresponding domain sizes (the sum of macropore and skeleton diameter). All monoliths were synthesized with a diameter of 4.6 mm and cladded with a suitable polyaryletheretherketone (PEEK) polymer in a standardized and optimized manner for the subsequent chromatographic evaluation of the resulting monolithic HPLC columns. The columns were tested under normal phase conditions using n-heptane/dioxane (95:5 v/v) as a mobile phase and 2-nitroanisole as a test compound for the determination of separation efficiency and permeability. Two different sets of columns were prepared: the first one in which the amount of PEO was stepwise decreased to yield monoliths with identical macropore volumes and variations in the domain sizes. The second group of materials was synthesized adjusting both TMOS and PEO quantities to yield monolithic columns with identical macropore diameters of about 1.80 microm but different skeleton diameters and macropore volumes. The chromatographic results suggest that an increase in the column performance cannot be achieved by just arbitrarily decreasing the domain size of a given column. From a certain point of "downsizing" the monolithic structure a loss of structural homogeneity can be observed, which is apparently responsible for a lower chromatographic performance.