Beiträge zur Chemie des Phosphors. 167 [1, 2]. Konstitutions- und Konfigurationsisomere von Pentaphosphan(7), P5H7

Contributions to the Chemistry of Phosphorus. 167. Constitutional and Configurational Isomers of Pentaphosphane(7), P₅H₇ Phosphane mixtures containing 10—15 P-% of pentaphosphane(7), P₅H₇, are obtained by thermolysis of diphosphane, P₂H₄, or as residue from distillation of crude diphosphane [3]. According to the complete analysis of the ³¹P{¹H}-NMR spectrum on the basis of selective population transfer experiments, P₅H₇ exists as a mixture of three diastereomers of n-P₅H₇ — 1a (erythro, erythro), 1b (erythro, threo), 1c (threo, threo) — and of the constitutional isomer 2-phosphinotetraphosphane 2 (iso-P₅H₇, largest relative isomeric abundance). The correlation between the diastereomers and the observed spin systems results from the preferred gauche orientation of neighboring free electron pairs, the dependence of ¹J(PP) on dihedral angles, and the ³J(PP) long range couplings. From the ³¹P-NMR data of the phosphane molecules P_nH_n+2 with n = 1—5 general relationships for the δ(³¹P) values and the ¹J(PP) coupling constants of chain-type phosphorus hydrides as a function of their structural parameters are derived.     

Synthese und Kristallstruktur des Nitridokomplexes [Na-15-Krone-5]2[MoNF4]2 · 2 CH3CN

Synthesis and Crystal Structure of the Nitrido Complex [Na-15-crown-5]₂[MoNF₄]₂ · 2 CH₃CN The title compound is synthesized by the reaction of [MoCl₄(NSCl)]₂ with excess NaF in boiling acetonitrile in the presence of the crown ether 15-crown-5. [Na-15-crown-5]₂[MoNF₄]₂ · 2 CH₃CN forms yellow crystals, which were characterized by an X-ray structure determination. Space group P1 , Z = 1. Lattice dimensions at ?90°C: a = 855.5, b = 1 069.9, C = 1 143.5 pm, α = 105.71°, β = 95.29°, γ = 102.25° (4 096 independent observed reflexions, R = 0.039). Short Na…?F contacts of 234 pm with the four axial fluoro ligands of the dimeric anion [MoNF₄]₂^2? allow formulation of a triple ion. The centrosymmetric anion is dimerized by bent fluoro bridges with Mo? F distances of 198 and 245 pm. The long Mo? F distances of the MoF₂Mo ring are in transposition to the nitrido ligands, the bond lengths of which (165 pm) correspond to triple bonds.     

Alkynylxenon(II) fluorides

Alkynylxenon(II) fluorides, RCC(triple bond)XeF, have been prepared from the reactions of the corresponding trimethyl(alkynyl)silanes, Me3(-)SiC(triple bond)CR, and XeF2 in the presence of [NMe4F in common organic solvents at low temperature. The existence of the linear unit C(triple bond)C-Xe-F was proved for PhC(triple bond)CXeF by the 19F-13C NMR correlation method using the HMBC pulse sequence.     

Glycosylidene Carbenes a new approach to glycoside synthesis. Part 1. Preparation of glycosylidene-derived diaziridines and diazirines

A new approach towards the synthesis of glycosides based upon a (formal) insertion of glycosylidene carbenes into O? H bonds is presented. The synthesis and characterization of the glycosylidene-derived diazirines 25 – 28 , precursors of glycosylidene carbenes, are described. The diazirines were prepared by the rapid, high-yielding oxidation of the diaziridines 20 and 22 – 24 with I₂/Et₃N. The diaziridines, the first examples of C- alkoxy-diaziridines, were formed in high yields by the reaction of the [(glycosylidene)-amino]methanesulfonates 14 and 17 – 19 with a saturated solution of NH₃ in MeOH. The diazirines are highly reactive compounds, losing N₂ at room temperature or below. The reaction of the gluco-configurated diazirine 25 with i-PrOH yielding a mixture of the α- and β-D -glucosides 29 and 30 illustrates the potential of glycosylidene-derived diazirines as a new type of glycosyl donors.     

Linear and cyclic polysilanes containing the bis(trimethylsilyl)amino group: synthesis,reactions, and spectroscopic characterization

The reaction of linear (Si(n)Cl(2)(n)(+2); n = 3-5) and cyclic (Si(5)Cl(10)) perchloropolysilanes with 1 or 2 equiv of LiN(SiMe(3))(2) results in the formation of the bis(trimethylsilyl)amino derivatives (Me(3)Si)(2)NSi(3)Cl(7) (1), (Me(3)Si)(2)NSi(4)Cl(9) (2), (Me(3)Si)(2)N(SiCl(2))(n)N(SiMe(3))(2) (n = 3, 4; n = 4, 5; n = 5, 6), cyclo-(Me(3)Si)(2)NSi(5)Cl(9) (7), and cyclo-[(Me(3)Si)(2)N](2)Si(5)Cl(8) (8). 1-8 easily can be hydrogenated with LiAlH(4) to give the corresponding amino and diamino polysilanyl hydrides. The monosubstituted and cyclic compounds 1, 2, 7, and 8 additionally afford Si-Si bond scission products, which cannot be separated in all cases. Chloro- and dichloro derivatives of Si(3)H(8), n-Si(4)H(10), and n-Si(5)H(12) are obtained from the corresponding aminosilanes and dry HCl. All compounds were characterized by standard spectroscopic techniques. For Si-H derivatives the coupled (29)Si NMR spectra were analyzed to obtain an unequivocal structural proof.     

Tailor-made functionalization of silicon nitride surfaces

This communication presents the first functionalization of a hydrogen-terminated silicon-rich silicon nitride (Si3Nx) surface with a well-defined, covalently attached organic monolayer. Properties of the resulting monolayers are monitored by measurement of the static water contact angle, X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRRAS). Further functionalization was performed by reaction of Si3Nx with a trifluoroethanol ester alkene (CH2=CH-(CH2)8CO2CH2CF3) followed by basic hydrolysis to afford the corresponding carboxylic acid-terminated monolayer with hydrophilic properties. These results show that Si3Nx can be functionalized with a tailor-made organic monolayer, has highly tunable wetting properties, and displays significant potential for further functionalization.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Potentiometric titration of milligram quantities of uranium in the presence of iron

A method is described for the potentiometric titration of milligram quantities of the uranium(IV) ion in the presence of iron. This is accomplished by complexing the iron with 1.10-phcnanthroline. The uranium can then be titrated with standard ceric sulfate without interference from the iron.