Identification and in vitro antioxidant activities of phenolic compounds isolated from Cynoglossum cheirifolium L.

In an extensive search for bioactive compounds from plant sources, the quantitative and qualitative characterisation of the compounds present in Cynoglossum cheirifolium extracts was studied. Total phenolic and flavonoid contents were determined by spectrophotometric techniques. In vitro antioxidant and radical scavenging profiling was determined through DPPH^? scavenging activity and Ferric reducing antioxidant power (FRAP). Our study showed that leaves produce more phenolic compounds, followed by flowering aerial part. The butanolic fraction obtained from leaves extract exhibited the highest total phenolics (78.65 ± 3.58 mg GAE/g DW) and flavonoids (22.15 ± 4.66 mg CE/g DW). In contrast, this fraction displayed the highest DPPH^? scavenging ability with IC₅₀ values of 0.06 ± 0.003 mg/mL. The RP-HPLC-PDA analysis of phenolic compounds from leaves of C. cheirifolium lets to identify: rosmarinic acid, ferulic acid, caffeic acid, p-coumaric acid, syringic acid, sinapic acid and rutin. The obtained results indicate that this plant represent a valuable source of natural antioxidants.     

Structural and electrochemical characterization of polyaniline/LiCoO2 nanocomposites prepared via a Pickering emulsion

Polyaniline (PANI)/LiCoO₂ nanocomposite materials are successfully ready through a solid-stabilized emulsion (Pickering emulsion) route. The properties of nanocomposite materials have been put to the test because of their possible relevance to electrodes of lithium batteries. Such nanocomposite materials appear thanks to the polymerization of aniline in Pickering emulsion stabilized with LiCoO₂ particles. PANI has been produced through oxidative polymerization of aniline and ammonium persulfate in HCl solution. The nanocomposite materials of PANI/LiCoO₂ could be formed with low amounts of PANI. The morphology of PANI/LiCoO₂ nanocomposite materials shows nanofibers and round-shape-like morphology. It was found that the morphology of the resulting nanocomposites depended on the amount of LiCoO₂ used in the reaction system. Ammonium persulfate caused the loss of lithium from LiCoO₂ when it was used at high concentration in the polymerization recipe. Highly resolved splitting of 006/102 and 108/110 peaks in the XRD pattern provide evidence to well-ordered layered structure of the PANI/LiCoO₂ nanocomposite materials with high LiCoO₂ content. The ratios of the intensities of 003 and 104 peaks were found to be higher than 1.2 indicating no pronounced mixing of the lithium and cobalt cations. The electrochemical reactivity of PANI/LiCoO₂ nanocomposites as positive electrode in a lithium battery was examined during lithium ion deinsertion and insertion by galvanostatic charge–discharge testing; PANI/LiCoO₂ nanocomposite materials exhibited better electrochemical performance by increasing the reaction reversibility and capacity compared to that of the pristine LiCoO₂ cathode. The best advancement has been observed for the PANI/LiCoO₂ nanocomposite 5 wt.% of aniline.     

(2,2′‐Bipyridyl‐κ2N,N′)­bis­(salicyl­ato‐κ2O,O′)­zinc(II)

The asymmetric unit of the title compound, [Zn(C₇H₅O₃)₂(C₁₀H₈N₂)], contains one monomeric zinc complex. The Zn atom is coordinated to one 2,2′‐bipyridyl ligand via both N atoms and to two salicyl­ate anions (Hsal⁻) in a bidentate chelating manner involving carboxyl­ate O‐atom coordination. The complex exhibits a distorted octahedral geometry about the Zn^II atom, with the `apical' positions occupied by one of the two N atoms of the bipyridyl ligand and an O atom from one Hsal<sup>−</sup> ligand; the Zn atom is 0.168 (1) Å out of the `basal' plane. Two intramolecular six‐membered hydrogen‐bonded rings are present, generated from interactions between the carboxyl and hydroxyl groups of the salicyl­ate ligands. The crystal packing is governed by weak C—H⋯O and C—H⋯π interactions.     

Flow-injection technique for determination of uranium and thorium isotopes in urine by inductively coupled plasma mass spectrometry

A sensitive and efficient flow-injection (FI) preconcentration and matrix-separation technique coupled to sector field ICP–mass spectrometry (SF-ICP–MS) has been developed and validated for simultaneous determination of ultra-low levels of uranium (U) and thorium (Th) in human urine. The method is based on selective retention of U and Th from a urine matrix, after microwave digestion, on an extraction chromatographic TRU resin, as an alternative to U/TEVA resin, and their subsequent elution with ammonium oxalate. Using a 10 mL sample, the limits of detection achieved for ²³⁸U and ²³²Th were 0.02 and 0.03 ng L^–1, respectively. The accuracy of the method was checked by spike-recovery measurements. Levels of U and Th in human urine were found to be in the ranges 1.86–5.50 and 0.176–2.35 ng L^–1, respectively, well in agreement with levels considered normal for non-occupationally exposed persons. The precision obtained for five replicate measurements of a urine sample was 2 and 3% for U and Th, respectively. The method also enables on-line measurements of the ²³⁵U/²³⁸U isotope ratios in urine. Precision of 0.82–1.04% (RSD) was obtained for ²³⁵U/²³⁸U at low ng L^–1 levels, using the FI transient signal approach.     

One-pot synthesis of new heterocycles: 2,4-disubstituted 6,7-dihydro-5H-benzo[6,7]cyclohepta[1,2-d]pyrimidines

The reaction of 1-benzosuberone with nitriles in the presence of triflic anhydride affords in good yields 2,4-diaryl substituted 6,7-dihydro-5H-benzo[6,7]cyclohepta[1,2-d]pyrimidines, a new class of heterocycle.     

Synthesis of azide‐functionalized nanoparticles by microemulsion polymerization and surface modification by click chemistry in aqueous medium

Stable translucent aqueous suspensions of azide‐functionalized cross‐linked nanoparticles (NPs), with diameters in the 15–20 nm range, were prepared using two synthetic approaches. Copolymerization of azidomethylstyrene (VBN₃), styrene, and divinylbenzene in various oil‐in‐water microemulsions led to NPs with modulable azide contents (0.53–0.78 mmol/g) and surface over volume distributions. Surface modifications of reactive NPs bearing chlorobenzyl groups, produced by microemulsion copolymerization of vinylbenzylchloride, with sodium azide led to azido‐coated NPs with high densities of peripheral groups (0.13–0.45 mmol/g). It is shown that the nature of the surfactant used for the preparation of the microemulsion has an impact on the incorporation of VBN₃ in the polymer particles as well as on the surface reaction yield. The azide‐functionalized NPs were used as clickable polymeric scaffolds for the grafting of sparingly water‐soluble dansyl and fluorescein derivatives through copper(I)‐catalyzed azide‐alkyne cycloaddition in water in the presence of surfactants as solubilizing agents to produce fluorescent NPs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Palladium-catalyzed direct arylation using free NH2 substituted thiophene derivatives with inhibition of amination type reaction

The palladium-catalyzed direct arylation at C2 or C5 of free NH₂ substituted thiophene derivatives was found to proceed in moderate to high yields using a variety of aryl halides. The choice of potassium acetate as the base was found to be crucial to inhibit the amination reaction and to promote the direct arylation.     

Nigericin and grisorixin methyl ester from the Algerian soil-living Streptomyces youssoufiensis SF10 strain: a computational study on their epimeric structures and evaluation of glioblastoma stem cells growth inhibition

The present work describes the metabolites produced by a strain identified as Streptomyces youssoufiensis, whose secondary metabolites profile has not been studied so far. The crude ethyl acetate extract was analyzed by high performance liquid chromatography-electrospray ionization mass spectrometry, leading to the detection of the ionophoric polyethers nigericin, epinigericin, abierixin and the newly isolated grisorixin methyl ester. The presence of epimeric forms of nigericin/epinigericin and grisorixin/epigrisorixin has spurred density functional theory computational calculations. This analysis was able to provide the relative stability of the most favored epimers, setting the basis for general structural considerations applicable to several other polyethers. Both nigericin sodium salt and grisorixin methyl ester showed to affect glioblastoma stem cells proliferation in a dose-dependent manner, with a higher activity for the more lipophilic grisorixin methyl ester (GI₅₀ values of 3.85 and 3.05 μM for VIPI and COMI human glioblastoma stem cells, respectively).