硫与Mn2O3空心球的复合结构及其在锂硫电池中的应用

在水热条件下,以碳球为模板合成了Mn₂O₃空心球,并用作锂硫电池的载硫基底材料。测试结果表明载硫量为51%的Mn₂O₃-S复合材料显示了较高的比容量,良好的循环稳定性和倍率性能。循环100圈后,最终可逆容量仍保持657 mA·g^-1,证明该Mn₂O₃空心球是一种有潜力的载硫基底材料。     

GAMLSS模型在车险定价中的应用

在系统梳理国内外非寿险产品费率厘定方法的基础上,详细介绍了GAMLSS模型,证明了在位置参数和尺度参数的预测中均引入随机效应的GAMLSS模型可更有效地解释纵向数据中个体间的异质性.最后将GAMLSS模型应用于一组纵向车辆保险数据,计算了先验保费、后验保费、后验风险保费和奖惩因子.实证结果表明,GAMLSS模型不仅可为非寿险产品的定价提供依据,而且使风险分类更加稳定、合理.     

Acoustics and dynamics of coaxial interacting vortex rings

Using a contour dynamics method for inviscid axisymmetric flow we examine the effects of core deformation on the dynamics and acoustic signatures of coaxial interacting vortex rings. Both “passage” and “collision” (head-on) interactions are studied for initially identical vortices. Good correspondence with experiments is obtained. A simple model which retains only the elliptic degree of freedom in the core shape is used to explain some of the calculated features.     

Synthesis, Crystal Structure, and Biological Activity of Naphthalen-2-y1-4-methyl-1,2,3-thiadiazole-5-carboxylate

The title compound naphthalen-2-y1-4-methy1-1,2,3-thiadiazole-5-carboxylate(C14H10N2O2S,Mr = 270.31)was synthesized by the reaction of 4-methyl-1,2,3-thiadiazole-5-carbonyl chloride with 2-naphthol,and its structure was characterized by IR,1H NMR,high-resolution mass spectrometry and single-crystal X-ray diffraction.The crystal belongs to orthorhombic,space group Pbcn with a = 23.475(5),b = 9.6640(19),c = 10.814(2)(A°),β = 90.00°,Z= 8,V= 2453.2(9)(A°)3,Mr = 270.30,Dc = 1.464 g/cm3,μ= 0.262 mm-1,F(000)= 1120,R = 0.0444 and wR = 0.1099.X-ray analysis revealed that the thiadiazole and naphthalene rings were non-planar,while,the thiadiazole ring and the ester group were essentially planar,and two intermolecular hydrogen bonds C(6)-H(6)…O(1)and C(14)-H(14)…O(1)were observed.The preliminary biological test showed that the title compound had antifungal and antivirus activities against tobacco mosaic virus.     

热处理对二氧化锰电化学行为的影响

以高锰酸钾和醋酸锰为前驱体, 通过液相沉淀法合成得到二氧化锰. 在不同温度热处理条件下研究二氧化锰的结构转变及其作为超级电容器电极材料的电化学行为. 采用X射线衍射(XRD), 扫描电镜(SEM), 氮气物理吸附和热重(TG)等手段表征产物的结构特点; 采用循环伏安和恒流充放电等方法表征其电化学行为. 结果表明: 合成的二氧化锰是具有中孔特征的α-MnO₂, 比表面积为253 m²·g^-1, 颗粒尺寸在50-100 nm之间. 350 °C以下的低温热处理使氧化锰仍能保持α-MnO₂的晶体结构, 比表面积为170 m²·g^-1左右, 单电极比电容值由原来未热解时的267 F·g^-1增加到250 °C热处理后的286 F·g^-1. 高温热处理(>450 °C)导致氧化锰逐渐过渡为α-Mn₂O₃, 且表面积下降约为30 m²·g^-1, 比电容急剧下降. 低温热处理后氧化锰的电化学稳定性明显提高, 在50 mV·s^-1的快速扫描速率下, 电极具有良好的倍率特性.     

微波水热时间对C/C复合材料结构和抗氧化性能的影响

以磷酸、B4C和Al2O3为原料,采用一种新的微波水热法对C/C复合材料基体进行了抗氧化改性,重点研究了微波水热时间对改性试样物相组成、微观结构和抗氧化性能的影响。采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、能量色散谱仪(EDS)及X射线光电子能谱(XPS)对改性后试样进行了表征。结果表明:改性后复合材料表面覆盖了一层由熔融态的HPO3、B2O3和结晶的Al(PO3)3、微量B4C粒子组成的涂层。经60~120 min的微波水热改性,复合材料的抗氧化性能随着微波水热处理时间的延长而改善,达到一定程度后,其变化不再明显。微波水热处理100 min后的试样抗氧化性能最佳,在600℃静态空气气氛下氧化16 h后,氧化失重仅为9.5×10-4 g.cm-2,氧化失重速率维持在4.46×10-5 g.cm-2.h-1的极低水平。     

Determination of Imidacloprid in Tomato Grown in Greenhouse Based on Copper(II) Phthalocyanine Modified Carbon Ceramic Electrode by Differential Pulse Voltammetry

A new sol‐gel derived electrocatalytic carbon ceramic electrode was prepared by incorporating copper(II) phthalocyanine (CuPc) in a carbon ceramic network. This electrode was used as a sensitive electrochemical sensor for determination of the insecticide Imidacloprid (1‐(6‐chloro‐3‐pyridylmethyl)‐N‐nitro‐imidazolidin‐2‐ylideneamine) by differential pulse voltammetry (DPV). The resulting modified electrode exhibits a cathodic peak potential shifted positively and an increasing in cathodic peak current in comparison with unmodified electrode. The redox properties of this modified electrode at various pH values and CuPc percentage were investigated. The catalytic current obtained from differential pulse voltammetry is linearly dependent on Imidacloprid concentration over the two linear ranges of 0.67‐17 μM and 17‐93 μM with correlation coefficient of R² = 0.9999 and R² = 0.990, respectively. The detection limit for Imidacloprid was found to be 0.28 μM according to lower linear range. Possible interferences from several common pesticides were also evaluated. The inherent stability, high sensitivity, low detection limit and low cost for each preparation are advantages of this sensor. Determination of Imidacloprid in commercial formulation and residual Imidacloprid in tomato grown in greenhouse (protected cultivation) was also conducted. The results obtained from commercial formulation were completely consistent with those obtained through the standard high‐performance liquid chromatography (HPLC) method.     

Eu(3+)-mediated polymerization of benzenetetracarboxylic acid studied by spectroscopy, temperature-dependent calorimetry, and density functional theory

Thermodynamic parameters for the complexation of Eu(3+) with pyromellitic acid (1,2,4,5-benzenetetracarboxylic acid, BTC) as a model system for polymerizable metal-complexing humic acids were determined using temperature-dependent time-resolved laser-induced fluorescence spectroscopy (TRLFS) and isothermal titration calorimetry (ITC). At low metal and ligand concentrations (<50 μM Eu(3+), <1 mM BTC), a 1:1 monomeric Eu-BTC complex was identified in the range of 25-60 °C. At elevated concentrations (>500 μM Eu(3+) and BTC) a temperature-dependent polymerization was observed, where BTC monomers are linked via coordinating shared Eu(3+) ions. The two methods lead to comparable thermodynamic data (ΔH = 18.5 ± 1.5/16.5 ± 0.1 kJ mol(-1); ΔS = 152 ± 5/130 ± 5 J mol(-1) K(-1); TRLFS/ITC) in the absence of polymerization. With the onset of polymerization, TRLFS reveals the water coordination number of the lanthanide, whereas calorimetry is superior in determining the thermodynamic data in this regime. Evaluating the heat uptake kinetics, the monomer and polymer formation steps could be separated by "time-resolved" ITC, revealing almost identical binding enthalpies for the sequential reactions. Structural features of the complexes were studied by Fourier-transform infrared (FTIR) spectroscopy in combination with density functional theory (DFT) calculations showing predominantly chelating coordination with two carboxylate groups in the monomeric complex and monodentate binding of a single carboxylate group in the polymeric complex of the polycarboxylate with Eu(3+). The data show that pyromellitic acid is a suitable model for the study of metal-mediated polymerization as a crucial factor in determining the effect of humic acids on the mobility of heavy metals in the environment.     

Friedel-Craft acylation of ar-himachalene: synthesis of acyl-ar-himachalene and a new acyl-hydroperoxide

Friedel-Craft acylation at 100 °C of 2,5,9,9-tetramethyl-6,7,8,9-tetrahydro-5H-benzocycloheptene [ar-himachalene], a sesquiterpenic hydrocarbon obtained by catalytic dehydrogenation of α-, β- and γ-himachalenes, produces a mixture of two compounds: (3,5,5,9-tetramethyl-6,7,8,9-tetrahydro-5H-benzocyclohepten-2-yl)-ethanone (2, in 69% yield), with a conserved reactant backbone, and 3, with a different skeleton, in 21% yield. The crystal structure of 3 reveals it to be 1-(8-ethyl-8-hydroperoxy-3,5,5-trimethyl-5,6,7,8-tetrahydronaphthalen-2-yl)-ethanone. In this compound O-H…O bonds form dimers. These hydrogen-bonds, in conjunction with weaker C-H…O interactions, form a more extended supramolecular arrangement in the crystal.