Kinetic Study of the Electro‐Catalytic Oxidation of Acetaldehyde on Copper Electrode

Electrocatalytic oxidation of acetaldehyde was investigated on a copper electrode in alkaline solution. The process of oxidation involved and its kinetics were established by using cyclic voltammetry and chronoamperometry techniques as well as steady state polarization measurements. It has been found that in the course of an anodic potential sweep the electro‐oxidation of acetaldehyde follows the formation of Cu(III) and is catalysed by this species through a mediated electron transfer mechanism. A mechanism based on the electrochemical generation of Cu(III) active sites and their subsequent consumption by the acetaldehyde in question was also investigated.     

Simultaneous determination of antazoline and naphazoline by the net analyte signal standard addition method and spectrophotometric technique

A novel net analyte signal standard addition method (NASSAM) was used for simultaneous determination of the drugs anthazoline and naphazoline. The NASSAM can be applied for determination of analytes in the presence of known interferents. The proposed method is used to eliminate the calibration and prediction steps of multivariate calibration methods; the determination is carried out in a single step for each analyte. The accuracy of the predictions against the H-point standard addition method is independent of the shape of the analyte and interferent spectra. The net analyte signal concept was also used to calculate multivariate analytical figures of merit, such as LOD, selectivity, and sensitivity. The method was successfully applied to the simultaneous determination of anthazoline and naphazoline in a commercial eye drop sample.     

Amino modified mesostructured silica nanoparticles for efficient adsorption of methylene blue

In this work, mesostructured silica nanoparticles (MSN(AP)) with high adsorptivity were prepared by a modification with 3-aminopropyl triethoxysilane (APTES) as a pore expander. The performance of the MSN(AP) was tested by the adsorption of MB in a batch system under varying pH (2-11), adsorbent dosage (0.1-0.5gL(-1)), and initial MB concentration (5-60mgL(-1)). The best conditions were achieved at pH 7 when using 0.1gL(-1) MSN(AP) and 60mgL(-1)MB to give a maximum monolayer adsorption capacity of 500.1mgg(-1) at 303K. The equilibrium data were evaluated using the Langmuir, Freundlich, Temkin, and Harkins-Jura isotherms and fit well to the Freundlich isotherm model. The adsorption kinetics was best described by the pseudo-second order model. The results indicate the potential for a new use of mesostructured materials as an effective adsorbent for MB.     

Bacterial Reduction of Cr(VI) at Technical Scale—The Malaysian Experience

The bacterial reduction of Cr(VI) from industrial wastewater was evaluated using a 2.0-m³ bioreactor. Liquid pineapple waste was used as a nutrient for the biofilm community formed inside the bioreactor. The use of rubber wood sawdust as packing material was able to immobilize more than 10⁶?CFU?mL^?1 of Acinetobacter haemolyticus cells after 3?days of contact time. Complete reduction of 15?C240?mg?L^?1 of Cr(VI) was achieved even after 3?months of bioreactor operation. Cr(VI) was not detected in the final effluent fraction indicating complete removal of Cr from solution from the flocculation/coagulation step and the unlikely re-oxidation of Cr(III) into Cr(VI). Impatiens balsamina L. and Gomphrena globosa L. showed better growth in the presence of soil?Csludge mixture compared to Coleus scutellarioides (L.) Benth. Significant amounts of Cr accumulated at different sections of the plants indicate its potential application in Cr phytoremediation effort. The bacterial-based system was also determined not to be detrimental to human health based on the low levels of Cr detected in the hair and nail samples of the plant operators. Thus, it can be said that bacterial-based Cr(VI) treatment system is a feasible alternative to the conventional system especially for lower Cr(VI) concentrations, where sludge generated can be used as growth supplement for ornamental plant as well as not detrimental to the health of the workers.     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Hydrogel networks of poly(ethylene oxide) star-molecules supported by expanded polytetrafluoroethylene membranes: characterization, biocompatibility evaluation and glucose diffusion characteristics

The present work discusses the grafting by electron beam irradiation of poly(ethylene oxide) (PEO) star-shaped polymers onto porous expanded polytetrafluoroethylene (EXPTFE) surfaces. The resulting materials are intended to combine the good biocompatible properties of PEO with the outstanding mechanical properties of PTFE. The star-shaped PEOs were synthesized via anionic polymerization. 3 Mev electron beam irradiation was applied to graft these PEO stars onto porous EXPTFE surfaces. The hydrophobic EXPTFE surface had to be pre-modified with N-vinylpyrrolidone. ESCA was used to quantify the amount of grafted star-shaped PEO. Unmodified EXPTFE surfaces are well known, when implanted in a body, to be rapidly covered by a layer of cells and fibrin. The EXPTFE coated with PEO were implanted in the peritoneal cavity of rats (or under the back skin). This implantation did not induce any inflammation reactions and SEM analysis had attested the absence of adsorbed cells and fibrin. The glucose diffusion properties of these membranes were studied by a lag time analysis method and compared to those of pure PEO hydrogels. As expected, glucose diffuses through the hydrogel coated membrane and diffusion is not affected by the presence of the EXPTFE membrane.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

A facile one‐pot synthesis of novel substituted 1,2,3,4‐tetrahydropyrimidine,part 2: Synthesis of 1‐(aralkyl/aryl)‐3‐(alkyl/aralkyl/aryl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines

1‐(Aralkyl/aryl)‐3‐(alkyyaralkyl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines ( 2a‐c ) have been synthesized by dethiomethylation of 5‐aroyl‐6‐methylthio‐1,2,3,4‐tetrahydropyrimidines ( 1a‐c ). An alternative one‐pot synthetic strategy has been developed for the title compounds 2a‐t by the reaction of enaminones 3 with pri mary amine and formaldehyde in refluxing methanol in good yields.     

Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.