Solid-phase extraction clean-up procedure for the analysis of PAHs in lichens

A clean-up procedure based on a solid-phase extraction column was optimized for determination of polycyclic aromatic hydrocarbons (PAHs) in lichen extracts to remove co-extracted compounds from the matrix in the final extract. Several kinds of solid phases were evaluated: normal phase (-NH₂ and alumina), strong anion exchange and reversed phase. The -NH₂ columns were the most effective by using a packed solid bed of 500?mg. The lichen raw extract was loaded on the column previously conditioned with dichloromethane and hexane. Hexane (0.5?mL) was used as rinsing solvent, and PAHs were quantitatively eluted (80–97%) using 2?mL of hexane–dichloromethane (65–35) as eluting solvent. In these conditions, even the heaviest PAHs were quantitatively eluted. The optimized SPE method provides a short time and low-solvent-consumption sample clean-up compared with other conventional methods based on column chromatography. The analytical procedure, dynamic sonication-assisted extraction, followed by the optimized solid-phase extraction clean-up, was used to determine the 16 EPA priority PAHs from native lichens collected from the Aragon valley in central Pyrenees. The PAH concentrations in lichen samples ranged from 352 to 1654?ng?g^?1, and the minimum concentration value was established as the regional reference PAH levels in the area.     

Adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto fine powder of Typha latifolia L. root: kinetics and isotherm studies

Fine powder of Typha latifolia L. root was used for adsorption of copper and zinc ions from buffered and nonbuffered aqueous solutions. The adsorption reached equilibrium in 60 min. During this time, more than 90 % of the adsorption process was completed. The effect of initial pH, initial concentration of metal ion, and contact time was investigated in a batch system at room temperature. The optimum adsorption performance was observed at pH 5.00 and 4.25 for nonbuffered solutions of Cu(II) and Zn(II), respectively, while for buffered solutions it occurred at pH 6.00. The total metal uptake decreased on application of ammonium acetate buffer, from 37.35 to 17.00 mg g^?1 and 28.80 to 9.90 mg g^?1 for Cu(II) and Zn(II) solutions, respectively, with 100 mg L^?1 initial concentration. The pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models were used to describe the adsorption kinetics. The experimental data followed the pseudo-second-order kinetic model. The biosorption equilibrium was well described by Langmuir and Freundlich isotherm models.     

An overview of heterogeneous photocatalysis for the degradation of organic compounds: A special emphasis on photocorrosion and reusability

Heterogeneous photocatalysis has been extensively investigated for the degradation of organic pollutants from wastewater. The remarkable advantages of the heterogeneous photocatalysis process depend upon its ability to produce reactive oxygen species under visible/UV/solar light irradiation. However, the long-term stability and reuse potential of these catalysts are of great concern these days, yet understudied. This review aims to systematically present a state of the art understanding of such catalysts' reuse potential. Various important surface characteristics of the photocatalysts for improving the photostability and activity of the catalyst are discussed. Besides, the synergistic effect of different surface modified materials, composite materials and their surface characteristics for their enhanced activity are also covered. Finally, a discussion on various regeneration processes used for such catalysts is also presented, identifying some vital research needs in this field.     

Survey of Phenolic Acids,Flavonoids and In Vitro Antioxidant Potency Between Fig Peels and Pulps: Chemical and Chemometric Approach

In the present study, chromatic coordinates, phenolic acids, flavonoids and antioxidant capacity assessed by 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate (ABTS) and lipid peroxidation inhibition capacity (LPIC) essays and their relative IC50 were investigated in 25 fig cultivars growing in Morocco. The aims of this study were to determine (i) the variation in these compounds among light and dark-colored cultivars, (ii) their partitioning between fruit peel and pulp and (iii) to display network connections among these variables. Twelve phenolic compounds (PCs) were isolated in peel extract versus eight in pulp samples. Anthocyanins, mainly cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the predominant compounds in peels, where the mean concentrations were 75.90 ± 18.76 and 77.97 ± 18.95 µg/g dw, respectively. On the other hand, (−)-epicatechin and cyanidin-3-O-rutinoside were the major compounds in the pulp extracts, where the mean values were 5.23 ± 4.03 and 9.01 ± 5.67 µg/g dw, respectively. A two-dimensional hierarchically clustered heatmap was applied to the dataset to explore correlations in the dataset and similarities between cultivars, without dimensionality reduction. Results showed that anthocyanins, particularly pelargonidin-3-O-rutinoside, cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the main contributors to the peels’ free radical scavenging capacity. This capacity was particularly higher in the peel of dark-colored figs compared to the fruit pulp. The local cultivar “INRA 1301” showed the most promising phenolic profile due to its very high levels of almost all detected PCs, especially (−)-epicatechin, quercetin-3-O-rutinoside, quercetin-3-O-glucoside, cyanidine-3,5-diglucoside, cyanidine-3-O-rutinoside and pelargonidin-3-O-rutinoside (54.66, 141.08, 35.48, 494.08, 478.66, 12.56 µg/g dw, respectively). Having the darkest figs in the collection (L* = 25.72, c* = 22.09 and h° = 20.99), this cultivar has also combined promising IC50 values, which were of 19.85, 40.58 and 124.78 µg/mL for DPPH, ABTS and LPIC essays, respectively.     

Effect of the Ethanol/BTC Ratio on the Methane Uptake of Mechanochemically Synthesized MOF-199

We report on a detailed textural analysis of mechanochemically synthesized MOF-199 including N₂ adsorption-desorption and CO₂ adsorption isotherms data at 77 K and 273 K (up to atmospheric pressure), respectively, and CH₄ adsorption data at 298 K (up to 35 bar). We used the isotherm adsorption data to determine the micropore volume of the MOF-199 structures, to establish their methane uptake capacity and to understand how these properties depended on the Ethanol/BTC ratio used during the synthesis. The maximum methane uptake capacity for our specimens was recorded at 130 v/v at 35 bars. These results open an avenue for a better understanding of alternative manufacturing processes of MOF structures for gas storage applications.     

Homo- and heteronuclear 2D NMR approaches to analyse a mixture of deuterated unlike/like stereoisomers using weakly ordering chiral liquid crystals

We describe several homo- and heteronuclear 2D NMR strategies dedicated to the analysis of anisotropic (2)H spectra of a mixture of dideuterated unlike/like stereoisomers with two remote stereogenic centers, using weakly orienting chiral liquid crystals. To this end, we propose various 2D correlation experiments, denoted "D(H)(n)D" or "D(H)(n)C" (with n=1, 2), that involve two heteronuclear polarization transfers of INEPT-type with one or two proton relays. The analytical expressions of correlation signals for four pulse sequences reported here were calculated using the product-operators formalism for spin I=1 and S=1/2. The features and advantages of each scheme are presented and discussed. The efficiency of these 2D sequences is illustrated using various deuterated model molecules, dissolved in organic solutions of polypeptides made of poly-gamma-benzyl-L-glutamate (PBLG) or poly-epsilon-carbobenzyloxy-L-lysine (PCBLL) and NMR numerical simulations.     

Diversity of potential hydrogen bonds in cellulose I revealed by molecular dynamics simulation

We have performed molecular dynamics calculations using a revised version of the Gromos56A_carbo force field to understand the consequences of the different potential hydrogen bonding patterns on the structural stability and thermal behavior of the I_α and I_β forms of native cellulose. For each allomorph, we considered three patterns of hydrogen bonds: two patterns obtained from neutron diffraction data refinement and a regular mixture of the two. Upon annealing, the hydrogen bonding schemes of cellulose I_β, irrespective of the starting structure, re-arranged into the main hydrogen bond pattern experimentally observed (pattern A). On the other hand, the I_α structures, irrespective of the starting hydrogen bonding pattern, converged to a non-experimental structure where the adjacent chains are shifted along the chain direction by 0.12 nm in the hydrogen-bonded plane, and the hydroxymethyl group conformation alternates between gt and tg along the chain. The exotic structure in I_α might be a consequence of a deficiency in force field parameters and/or potential molecular arrangement in less crystalline cellulose.     

Production of Xylose from Meranti Wood Sawdust by Dilute Acid Hydrolysis

Xylitol production by bioconversion of xylose can be economically interesting if the raw material can be recovered from a cheap lignocellulosic biomass (LCB). Meranti wood sawdust (MWS) is a renewable and low-cost LCB that can be used as a promising and economic source of xylose, a starting raw material for the manufacture of several specialty chemicals, especially xylitol. This study aimed to optimize the hydrolysis process of MWS and to determine the influence of temperature, H₂SO₄ concentration, and residence time on xylose release and on by-product formation (glucose, arabinose, acetic acid, furfural, hydroxymethylfurfural (HMF), and lignin degradation products (LDPs)). Batch hydrolysis was conducted under various operating conditions, and response surface methodology was adopted to achieve the highest xylose yield. Xylose production was highly affected by temperature, acid concentration, and residence time. The optimum temperature, acid concentration, and time were determined to be 124 °C, 3.26 %, and 80 min, respectively. Under these optimum conditions, xylose yield and selectivity were attained at 90.6 % and 4.05 g/g, respectively.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.