The dynamics of defect ensembles in one-dimensional cellular automata

We investigate the dynamics of ensembles of diffusive defects in one-dimensional deterministic cellular automata. The work builds on earlier results on individual random walks in cellular automata. Here we give a natural condition guaranteeing diffusive behavior also in the presence of other defects. Simple branching and birth mechanisms are introduced and prototype classes of cellular automata exhibiting weakly interacting walks capable of annihilation and coalescence are studied. Their equilibrium behavior is also characterized. The design principles of cellular automata with desired diffusive interaction properties become transparent from this analysis.     

Relative thermodynamic stabilities of 2-substituted 4-methylene-1,3-dioxolanes and 4-methyl-1,3-dioxoles

The relative thermodynamic stabilities of 24 pairs of carbon-carbon double-bondexo-endo isomeric 2-substituted 4-methylene-1,3-dioxolanes (a) and 4-methyl-1,3-dioxoles (b) have been determined by base-catalyzed chemical equilibration in DMSO solution. In all cases, theendo isomer (b) is the favored species at thermodynamic equilibrium. A single alkyl substitutent on C-2 gives only a negligible contribution to the relative stability of the isomeric forms, but the presence of two alkyl groups on C-2 increases the relative stability of theendo isomer by 2–3 kL mol^–1. A still higher effect in favor of theendo isomer is produced by introduction of a single alkoxy group on C-2; this effect is further slightly accentuated by 2,2-dialkoxy substitution at C-2. The origin of the favorable effect of 2-alkoxy substitution on the relative stability of theendo isomer is not clear, but it seems to arise from an unexpected stability of theendo isomer rather than from an enhanced destabilization of theexo form.     

Quantum-chemical gas-phase calculations on the protonation forms oftrans- andcis-urocanic acid

The neutral, cationic, and anionic structures of both prototropic tautomers oftrans- andcis-urocanic acid [(E)- and (Z)-3-(1H-imidazol-4(5)-yl)propenoic acid, respectively] were studied by using semiempirical andab initio gas-phase calculations. Potential energy surfaces of the structures were calculated by using the semiempirical AM1 method, and the geometries corresponding to global minima on these surfaces were optimized up to the MP2/6-31G^* level of theory. The calculated protonation forms of each urocanic acid isomer have a planar molecular structure due to a delocalized -electron system, and all of them prefer thes-trans conformation with respect to the bond between the imidazole and the propenoic acid moieties. Thecis-urocanic acid structures are stabilized by an intramolecular hydrogen bond. The chargedcis-urocanic acid isomers have a lower molecular energy than the correspondingtrans-isomers, whereas the neutral molecules have, after inclusion of thermodynamic corrections, approximately the same energy. The cationic urocanic acid structures have about 2500 kJ mol^–1 lower energy than the anionic ones and about 1000 kJ mol^–1 lower energy than the neutral ones. The nonzwitterionic forms of the neutral urocanic acid isomers have about 200 kJ mol^–1 lower energy than the zwitterionic ones. These energy differences are explained by the proton affinities of the imidazole and the propenoic acid moieties of the urocanic acid structures.     

Non-centrosymmetric tetrameric assemblies of tetramethylammonium halides with uranyl salophen complexes in the solid state

Ditopic salophen-UO(2) receptors 1-4 and 7 co-crystallize with tetramethylammonium (TMA) chloride and fluoride salts producing good quality crystals amenable for X-ray diffraction characterization. The arrangement of the receptor and salt units in the crystal lattice is such that tetrameric ball-shaped assemblies are formed, where an inner cluster of four TMA cations are surrounded by an outer shell of four UO(2)-bound anions. These elaborate architectures, which occur in all cases, regardless of a certain degree of structural modification on the receptors, lead to lattices that belong to non-centrosymmetric (NCS) space groups. Interestingly, the tetragonal symmetry of the tetrameric ball-shaped assemblies is either retained (I4?) or lost (R3c and I4?3d) at the lattice level, without compromising the NCS nature of the crystal lattices. The principal X-ray investigation on TMAX (X = Cl/F) co-crystals, that is, 1-(TMA)Cl, 2-(TMA)Cl, 3-(TMA)Cl, 4-(TMA)Cl, 7-(TMA)Cl, and 7-(TMA)F, is accompanied by NMR and electrospray ionization (ESI) mass spectrometry studies to gather additional insight on the modality of formation of the solid state structures observed. The important role of cation-π interactions in the receptor-salt recognition process is renewed and strengthened by comparison with NMR titration data with a novel reference compound, the salophen-UO(2) complex 8. Given the importance of NCS and polar crystalline solids in the development of functional materials, this study shows that this property can be introduced into elaborate host-guest systems, as those which assemble in the architectures described here, thus expanding its field of applicability.     

Determination of organic compounds from wood combustion aerosol nanoparticles by different gas chromatographic systems and by aerosol mass spectrometry

Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods. A new sampling system is proposed where particles are charged with a bipolar charger and size-segregated with a differential mobility analyzer. This system was successfully used to sample particles from wood pyrolysis with particle sizes 30–100 nm. Particles were analyzed by four techniques: comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry, gas chromatography–time-of-flight mass spectrometry, gas chromatography–quadrupole mass spectrometry, and aerosol mass spectrometry (aerosol MS). In the chromatographic techniques, particles were collected on a filter and analyzed off-line after sample preparation, whereas in the aerosol MS, particle analysis was performed directly from the particle source. Target compounds of the samples were polyaromatic hydrocarbons and n-alkanes. The analytical techniques were compared and their advantages and disadvantages were evaluated. The sampling system operated well and target compounds were identified in low concentrations.     

Comparison of quartz and Teflon filters for simultaneous collection of size-separated ultrafine aerosol particles and gas-phase zero samples

In this research, the two most common filter media, quartz and Teflon, were tested to obtain information about the possible adsorption of gas-phase compounds onto filters during long sample collection of atmospheric aerosols. Particles of nanometer-size for off-line chemical characterization were collected using a recently introduced differential mobility analyzer for size separation. Samples were collected at an urban site (Helsinki, SMEARIII station) during spring 2010. Sampling time was 4 to 10 days for particles 50, 40, or 30 nm in diameter. Sample air flow was 4 L/min. The sampling setup was arranged so that two samples were obtained for each sampling period almost simultaneously: one containing particles and adsorbed gas-phase compounds and one containing adsorbed gas-phase compounds only. Filters were extracted and analyzed for the presence of selected carboxylic acids, polyols, nitrogen-containing compounds, and aldehydes. The results showed that, in quartz filter samples, gas-phase adsorption may be responsible for as much as 100% of some compound masses. Whether quartz or Teflon, simultaneous collection of gas-phase zero samples is essential during the whole sampling period. The dependence of the adsorption of gas-phase compounds on vapor pressure and the effect of adsorption on the deposited aerosol layer are discussed.     

Asymmetric,Three‐Component,One‐Pot Synthesis of Spiropyrazolones and 2,5‐Chromenediones from Aldol Condensation/NHC‐Catalyzed Annulation Reactions

A novel one‐pot, three‐component diastereo‐ and enantioselective synthesis of spiropyrazolones has been developed involving the aldol condensation of an enal to generate α,β‐unsaturated pyrazolones, which react with a second equivalent of enal through an N‐heterocyclic carbene (NHC)‐catalyzed [3+2] annulation. The desired spirocyclopentane pyrazolones are obtained in moderate to good yields and good to excellent stereoselectivities. Alternatively, starting from cyclic 1,3‐diketones, 2,5‐chromenediones are available through [2+4] annulation.     

Anion–π Interactions in Salts with Polyhalide Anions: Trapping of I42−

The directionality of interaction of electron‐deficient π systems with spherical anions (e.g,. halides) can be controlled by secondary effects like NH or CH hydrogen bonding. In this study a series of pentafluorophenyl‐substituted salts with polyhalide anions is investigated. The compounds are obtained by aerobic oxidation of the corresponding halide upon crystallization. Solid‐state structures reveal that in bromide 2 , directing NH–anion interactions position the bromide ion in an η¹‐type fashion over but not in the center of the aromatic ring. The same directing forces are effective in corresponding tribromide salt 3 . In the crystal, the bromide ion is paneled by four electron‐deficient aromatic ring systems. In addition, compounds 4 and 6 , which have triiodide and the rare tetraiodide dianion as anions, are described. Computational studies reveal that the latter is highly unstable. In the present case it is stabilized by the crystal lattice, for example, by interaction with electron‐deficient π systems.     

Synthesis and thermal behavior of Janus dendrimers,part 2

The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures (T_d) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite sides display liquid crystalline phases with exception of 3,5-type G1 dendrimer; while acetonide terminated dendrimers displayed merely melting transitions. Dendrimers having terminal alkyl chains at positions 3,4 or 3,4,5 in aromatic moieties exhibited enantiotropic mesophases. However, the thermal behavior of the dendrimers with 3,5-substitution pattern was different: the 3,5-type G1 dendrimer exhibit a lack of mesomorphic transition, and in the case of the 3,5-type G2 dendrimer, the mesophase was absent in the first heating scan but was observed during the subsequent cooling and heating scans at the rate of 10 °C/min.