Ab initio study of the substituent effects on the relative stability of the E and Z conformers of phenyl esters. Stereoelectronic effects on the reactivity of the carbonyl group

Equilibria between the Z (tau1= 0 degrees) and E (tau1= 180 degrees) conformers of p-substituted phenyl acetates 4 and trifluoroacetates 5 (X = OMe, Me, H, Cl, CN, NO2) were studied by ab initio calculations at the HF/6-31G* and MP2/6-31G* levels of theory. The preference for the Z conformer, DeltaE(HF), was calculated to be 5.36 kcal mol(-1) and 7.50 kcal mol(-1) for phenyl acetate and phenyl trifluoroacetate (i.e., with X = H), respectively. The increasing electron-withdrawing ability of the phenyl substituent X increases the preference of the Z conformer. An excellent correlation with a negative slope was observed for both series between DeltaE of the E-Z equilibrium and the Hammett sigma constant. By using an appropriate isodesmic reaction, it was shown that electron-withdrawing substituents decrease the stability of both conformers, but the effect is higher with the E conformer. Electron-withdrawing phenyl substituents decrease the delocalization of the lone pair of the ether oxygen to the C=O antibonding orbital (nO--> pi*C=O) in both the E and Z forms and in both series studied; this effect is higher in the E conformer than in the Z conformer. The nO --> pi*C=O electron donation has a minimum value with tau1= 90 degrees and a maximum value with tau1= 0 degrees (the Z conformer), the value with tau1= 180 degrees (the E conformer) being between these two values, obviously due to steric hindrance. The effects of the phenyl substituents on the reactivity of the esters studied are discussed in terms of molecular orbital interactions. ED/EW substituents adjust the availability of the pi*C=O antibonding orbital to interact with the lone pair orbital of the attacking nucleophile and therefore affect the reactivity: EW substituents increase and ED substituents decrease it. Excellent correlations were observed between the rate coefficients of nucleophilic acyl substitutions and pi*C=O occupancies of the ester series 4 and 5.     

Pressure-adjusted continual flow heart-cutting for the high throughput determination of amphetamine-type stimulant drugs in whole blood by fast multidimensional gas chromatography-mass spectrometry

Innovative features and technical improvements in modern bench-top quadrupole gas chromatograph-mass spectrometer (GC-MS) have prepared the way for faster and more cost-effective applications while still maintaining sufficient chromatographic resolution, speed of MS data acquisition and reliability of analytical methodology. In this paper, a short wide-bore capillary column with low film thickness (5 m x 0.32 mm i.d., 0.1 microm) was used a pre-fractionating column and only chosen heart-cuts were transferred to the second chromatographic dimension (15 m x 0.25 mm i.d., 0.25 microm) by means of a pressure-adjusted continual flow type switching device for quantification of five common amphetamine-type stimulant drugs. The instrumental setting used, in combination with carefully optimized operational fast GC and MS parameters, markedly decreased the retention times of the targeted analytes, e.g., amphetamine 0.891 min and methamphetamine 1.037 min, and the total chromatographic runtime (1.700 min), as well as reducing the need for continuous cleaning of the MS ion source and increasing column life compared with conventional GC-MS approaches. The performance of the instrumental configuration and analytical method was evaluated in validation experiments and the method was also applied to authentic samples. The method demonstrates the potential of fast GC-MS in combination with a gas-phase microfluidic Deans switch device for analysing of (semi)volatile compounds, such as amphetamine-type stimulant (ATS) drugs. This should be particularly useful in modern laboratories aiming at cost-efficient analysis as well as the optimum use of available laboratory capacity and instrumentation.     

Control of N‐Heterocyclic Carbene Catalyzed Reactions of Enals: Asymmetric Synthesis of Oxindole‐γ‐Amino Acid Derivatives

A strategy to control the switch between a non‐cycloaddition reaction and a cycloaddition reaction of enals, using N‐heterocyclic carbene (NHC) catalyisis, has been developed. The new scalable protocol leads to γ‐amino‐acid esters bearing a tetrasubstituted stereocenter in good yields and high stereoselectivities by homo‐Mannich reactions of enals and isatin‐derived ketimines. By simply changing the N‐ketimine substituent to an ortho‐hydroxy phenyl group, the corresponding spirocyclic oxindolo‐γ‐lactams are obtained.     

Achieving Strong Positive Cooperativity through Activating Weak Non‐Covalent Interactions

Positive cooperativity achieved through activating weak non‐covalent interactions is common in biological assemblies but is rarely observed in synthetic complexes. Two new molecular tubes have been synthesized and the syn isomer binds DABCO‐based organic cations with high orientational selectivity. Surprisingly, the ternary complex with two hosts and one guest shows a high cooperativity factor (α=580), which is the highest reported for synthetic systems without involving ion‐pairing interactions. The X‐ray single‐crystal structure revealed that the strong positive cooperativity likely originates from eight C?H???O hydrogen bonds between the two head‐to‐head‐arranged syn tube molecules. These relatively weak hydrogen bonds were not observed in the free hosts and only emerged in the complex. Furthermore, this complex was used as a basic motif to construct a robust [2+2] cyclic assembly, thus demonstrating its potential in molecular self‐assembly.     

Ion pair recognition of quaternary ammonium and iminium salts by uranyl-salophen compounds in solution and in the solid state

Efficient ditopic receptors for quaternary ammonium and iminium salts have been obtained upon functionalization of the uranyl-salophen unit with conformationally flexible side arms bearing phenyl or beta-naphthyl substituents. Binding affinities in chloroform solution have been measured for a large number of quaternary salts comprising tetramethylammonium (TMA), tetrabutylammonium (TBA), acetylcholine (ACh), N-methylpyridinium (NMP), and N-methylisoquinolinium (NmiQ) cations. Recognition of the anion partner is ensured by coordination to the hard Lewis acidic uranyl center, whereas cation-pi/CH-pi interactions of the quaternary ions are established with the aromatic pendants. The role of the cation-anion interactions on the dynamics of exchange between the free and complexed species is discussed. Solid-state structures have been obtained for a few salt-receptor combinations. In the solid state, side-armed receptor molecules form assemblies that enclose ion pair aggregates of varying composition and structure, including AChCl dimers, two different kinds of tetrameric (TMA)Cl clusters, and unidimentional salt strips of (NMP)Br. The lack of side arms as preferential binding sites for the polar quaternary cations prevents association patterns of the kinds formed with the side-armed receptors, as shown by the crystal structure of the complex of (TMA)Cl with the parent uranyl-salophen receptor.     

Quantitative sphingosine measurement as a surrogate for total ceramide concentration—preclinical and potential translational applications

Biomarkers are an increasingly important constituent of the drug development process, offering the potential of increased efficiency through reduced compound attrition and earlier proof of mechanism and/or efficacy. Assays developed for compound screening that can be directly translated for clinical trials are especially valuable, but their successful adoption requires a careful balance between assay performance and implementation costs. One such ‘fit‐for‐purpose’ biomarker assay, the indirect measurement of pharmacological modulation of sphingolipid biosynthesis and disposition, is presented here. Among spingolipids, numerous ceramide species are readily detectable in different lipoprotein fractions of mammalian plasma, but their parallel quantification can be prohibitively expensive and time consuming. Ceramides differ in their fatty acid moiety, which is readily removed by hydrolysis, yielding a common sphingosine derivative, the measurement of which serves as an indicator of total ceramide. When followed by liquid chromatography tandem mass spectrometry (LC/MS/MS) for detection, robust analyte quantification becomes relatively straightforward. The practical utility of a method developed to be fit for the purpose of rapidly and quantitatively measuring treatment‐induced variations in total ceramide from hamster plasma and individual lipoprotein fractions is described. With a linear calibration range from 0.003 to 33.4 μm sphingosine, precision and accuracy error in plasma‐based quality controls spiked with ceramides was less than 15%. The specificity of the assay for ceramides was also assessed. The simplicity of the method would allow for its potential translation to other preclinical species, as well as for clinical applications in later‐stage drug development. Copyright © 2009 John Wiley & Sons, Ltd.     

Size‐Selective Encapsulation of Hydrophobic Guests by Self‐Assembled M4L6 Cobalt and Nickel Cages

Subtle differences in metal–ligand bond lengths between a series of [M₄L₆]^4? tetrahedral cages, where M=Fe^II, Co^II, or Ni^II, were observed to result in substantial differences in affinity for hydrophobic guests in water. Changing the metal ion from iron(II) to cobalt(II) or nickel(II) increases the size of the interior cavity of the cage and allows encapsulation of larger guest molecules. NMR spectroscopy was used to study the recognition properties of the iron(II) and cobalt(II) cages towards small hydrophobic guests in water, and single‐crystal X‐ray diffraction was used to study the solid‐state complexes of the iron(II) and nickel(II) cages.     

Uranyl-salophen based ditopic receptors for the recognition of quaternary ammonium halides

Uranyl-salophen complexes endowed with aromatic side arms behave as very efficient ditopic receptors towards tetralkylammonium halides as a result of a combination of Lewis acid-base and cation-pi interactions.     

Subcomponent Self-Assembly of a Cyclic Tetranuclear FeII Helicate in a Highly Diastereoselective Self-Sorting Manner

An enantiomerically pure diamine based on the 4,15-difunctionalized [2.2]paracyclophane scaffold and 2-formylpyridine self-assemble into an optically pure cyclic metallosupramolecular Fe₄L₆ helicate upon mixing with iron(II) ions in a diastereoselective subcomponent self-assembly process. The cyclic assembly results from steric strain that prevents the formation of a smaller linear dinuclear triple-stranded helicate, and hence, leads to the larger strain-free assembly that fulfils the maximum occupancy rule. Interestingly, use of the racemic diamine also leads to a racemic mixture of the homochiral cyclic helicates as the major product in a highly diastereoselective narcissistic chiral self-sorting manner given the fact that the assembly contains ten stereogenic elements, which can in principle give rise to 149 different diastereomers. The metallosupramolecular aggregates could be characterized by NMR, UV/Vis and CD spectroscopy, mass spectrometry, and X-ray crystallography.     

High Accuracy Protein Structures from Minimal Sparse Paramagnetic Solid‐State NMR Restraints

There is a pressing need for new computational tools to integrate data from diverse experimental approaches in structural biology. We present a strategy that combines sparse paramagnetic solid‐state NMR restraints with physics‐based atomistic simulations. Our approach explicitly accounts for uncertainty in the interpretation of experimental data through the use of a semi‐quantitative mapping between the data and the restraint energy that is calibrated by extensive simulations. We apply our approach to solid‐state NMR data for the model protein GB1 labeled with Cu²⁺‐EDTA at six different sites. We are able to determine the structure to 0.9 Å accuracy within a single day of computation on a GPU cluster. We further show that in some cases, the data from only a single paramagnetic tag are sufficient for accurate folding.