Reconstructing bulk isotope ratios from compound‐specific isotope ratios

Carbon isotope analysis by bulk elemental analysis coupled with isotope ratio mass spectrometry has been the mainstay of δ¹³C analyses both at natural abundance and in tracer studies. More recently, compound‐specific isotope analysis (CSIA) has become established, whereby organic constituents are separated online by gas or liquid chromatography before oxidation and analysis of CO₂ for constituent δ¹³C. Theoretically, there should be concordance between bulk δ¹³C measurements and carbon‐weighted δ¹³C measurements of carbon‐containing constituents. To test the concordance between the bulk and CSIA, fish oil was chosen because the majority of carbon in fish oil is in the triacylglycerol form and ～95% of this carbon is amenable to CSIA in the form of fatty acids. Bulk isotope analysis was carried out on aliquots of oil extracted from 55 fish samples and δ¹³C values were obtained. Free fatty acids (FFAs) were produced from the oil samples by saponification and derivatised to fatty acid methyl esters (FAMEs) for CSIA by gas chromatography/combustion/isotope ratio mass spectrometry. A known amount of an internal standard (C15:0 FAME) was added to allow analyte quantitation. This internal standard was also isotopically calibrated in both its FFA (δ¹³C = ?34.30‰) and FAME (δ¹³C = ?34.94‰) form. This allowed reporting of FFA δ¹³C from measured FAME δ¹³C values. The bulk δ¹³C was reconstructed from CSIA data based on each FFA δ¹³C and the relative amount of CO₂ produced by each analyte. The measured bulk mean δ¹³C (SD) was ?23.75‰ (1.57‰) compared with the reconstructed bulk mean δ¹³C of ?23.76 (1.44‰) from CSIA and was not significantly different. Further analysis of the data by the Bland‐Altman method did not show particular bias in the data relative to the magnitude of the measurement. Good agreement between the methods was observed with the mean difference between methods (range) of 0.01‰ (?1.50 to 1.30). Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and characterization of standard reference material 1849 infant/adult nutritional formula

Standard Reference Material (SRM) 1849 Infant/Adult Nutritional Formula has been issued by the National Institute of Standards and Technology (NIST) as a replacement for SRM 1846 Infant Formula, issued in 1996. Extraction characteristics of SRM 1846 have changed over time, as have NIST's analytical capabilities. While certified mass fraction values were provided for five constituents in SRM 1846 (four vitamins plus iodine), certified mass fraction values for 43 constituents are provided in SRM 1849 (fatty acids, elements, and vitamins) and reference mass fraction values are provided for an additional 43 constituents including amino acids and nucleotides, making it the most extensively characterized food-matrix SRM available from NIST.     

Corrigendum to “EuBaFe2O5+w: Valence mixing and charge ordering are two separate cooperative phenomena” [J. Solid State Chem. 180 (2007) 148-157]

An error in the expression for the Fe²⁺, Fe³⁺ valence-mixing probability in RBaFe₂O_5+w is acknowledged and correct formula is derived. The new formula slightly improves the least-squares fit to the experimental concentrations of the Mössbauer component Fe^2.5+ as a function of the oxygen-nonstoichiometry parameter w for R=Eu.     

A Rechargeable Al/S Battery with an Ionic‐Liquid Electrolyte

Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite‐free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg^?1) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlS_x. Herein, we demonstrate the first reversible Al/S battery in ionic‐liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid‐state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid‐state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.     

Click Chemistry Mediated Functionalization of Vertical Nanowires for Biological Applications

Semiconductor nanowires (NWs) are gaining significant importance in various biological applications, such as biosensing and drug delivery. Efficient and controlled immobilization of biomolecules on the NW surface is crucial for many of these applications. Here, we present for the first time the use of the Cu^I‐catalyzed alkyne–azide cycloaddition and its strain‐promoted variant for the covalent functionalization of vertical NWs with peptides and proteins. The potential of the approach was demonstrated in two complementary applications of measuring enzyme activity and protein binding, which is of general interest for biological studies. The attachment of a peptide substrate provided NW arrays for the detection of protease activity. In addition, green fluorescent protein was immobilized in a site‐specific manner and recognized by antibody binding to demonstrate the proof‐of‐concept for the use of covalently modified NWs for diagnostic purposes using minute amounts of material.     

Insights into electrolytic stabilization with weak polarization as treatment for archaeological copper objects

Immersion of corroded copper artefacts in dilute sodium sesquicarbonate solution is a well-recognized stabilization technique—especially in the conservation of objects recovered from marine environments and therefore saturated with chlorides. Here we describe three linked experiments performed to investigate a variation on this treatment, involving the application of a low potential to the artefact in order to drive the chloride extraction process. This includes a new spectroelectrochemical approach which allows 2-D pseudorandom X-ray reflection diffraction patterns to be obtained without interrupting the reaction in solution. Experiments were carried out on synthetically produced chloride layers on copper (nantokite and atacamite). We show that a thick chloride layer is, in general, replaced by a thin cuprite layer through a mechanism which involves detachment of the chloride crystallites from the surface prior to dissolution.     

The caffeine contents of dietary supplements commonly purchased in the US: analysis of 53 products with caffeine-containing ingredients

As part of a study initiating the development of an analytically validated Dietary Supplement Ingredient Database (DSID) in the United States (US), a selection of dietary supplement products were analyzed for their caffeine content. Products sold as tablets, caplets, or capsules and listing at least one caffeine-containing ingredient (including botanicals such as guarana, yerba mate, kola nut, and green tea extract) on the label were selected for analysis based on market share information. Two or three lots of each product were purchased and analyzed using high-pressure liquid chromatography (HPLC). Each analytical run included one or two National Institute of Standards and Technology (NIST) Standard Reference Materials (SRMs) and two products in duplicate. Caffeine intake per serving and per day was calculated using the maximum recommendations on each product label. Laboratory analysis for 53 products showed product means ranging from 1 to 829 mg caffeine/day. For products with a label amount for comparison (n = 28), 89% (n = 25) of the products had analytically based caffeine levels/day of between −16% and +16% of the claimed levels. Lot-to-lot variability (n = 2 or 3) for caffeine in most products (72%) was less than 10%.     

Measuring vitamins and minerals in dietary supplements for nutrition studies in the USA

This article illustrates the importance of having analytical data on the vitamin and mineral contents of dietary supplements in nutrition studies, and describes efforts to develop an analytically validated dietary supplement ingredient database (DSID) by a consortium of federal agencies in the USA. Preliminary studies of multivitamin mineral supplements marketed in the USA that were analyzed as candidates for the DSID are summarized. Challenges are summarized, possible future directions are outlined, and some related programs at the Office of Dietary Supplements, National Institutes of Health are described. The DSID should be helpful to researchers in assessing relationships between intakes of vitamins and minerals and health outcomes.     

Layer-by-layer deposition of open-pore mesoporous TiO<Subscript>2</Subscript>-Nafion® film electrodes

The formation of variable thickness TiO₂ nanoparticle-Nafion® composite films with open pores is demonstrated via a layer-by-layer deposition process. Films of about 6 nm diameter TiO₂ nanoparticles grow in the presence of Nafion® by “clustering” of nanoparticles into bigger aggregates, and the resulting hierarchical structure thickens with about 25 nm per deposition cycle. Film growth is characterized by electron microscopy, atomic force microscopy, and quartz crystal microbalance techniques. Simultaneous small-angle X-ray scattering and wide-angle X-ray scattering measurements for films before and after calcination demonstrate the effect of Nafion® binder causing aggregation. Electrochemical methods are employed to characterize the electrical conductivity and diffusivity of charge through the TiO₂-Nafion® composite films. Characteristic electrochemical responses are observed for cationic redox systems (diheptylviologen^2+/+, \({\text{Ru}}{\left( {{\text{NH}}_{3} } \right)}^{{3 + /2 + }}_{6} \), and ferrocenylmethyl-trimethylammonium^2+/+) immobilized into the TiO₂-Nafion® nanocomposite material. Charge conduction is dependent on the type of redox system and is proposed to occur either via direct conduction through the TiO₂ backbone (at sufficiently negative potentials) or via redox-center-based diffusion/electron hopping (at more positive potentials).