Chromium(VI) Forms Thiolate Complexes with gamma-Glutamylcysteine, N-Acetylcysteine, Cysteine, and the Methyl Ester of N-Acetylcysteine

Reaction of potassium dichromate with gamma-glutamylcysteine, N-acetylcysteine, and cysteine in aqueous solution resulted in the formation of 1:1 complexes of Cr(VI) with the cysteinyl thiolate ligand. The brownish red Cr(VI)-amino acid/peptide complexes exhibited differential stability in aqueous solutions at 4 degrees C and ionic strength = 1.5 M, decreasing in stability in the order: gamma-glutamylcysteine > N-acetylcysteine > cysteine. (1)H, (13)C, and (17)O NMR studies showed that the amino acids act as monodentate ligands and bind to Cr(VI) through the cysteinyl thiolate group, forming RS-Cr(VI)O(3)(-) complexes. No evidence was obtained for involvement of any other possible ligating groups, e.g., amine or carboxylate, of the amino acid/peptide in binding to Cr(VI). EPR studies showed that chromium(V) species at g = 1.973-4 were formed upon reaction of potassium dichromate with gamma-glutamylcysteine and N-acetylcysteine. Reaction of potassium dichromate or sodium dichromate with N-acetylcysteine and the methyl ester of N-acetylcysteine in N,N-dimethylformamide (DMF) also led to the formation of RS-Cr(VI)O(3)(-) complexes as determined by UV/vis, IR, and (1)H NMR spectroscopy. Thus, an early step in the reaction of Cr(VI) with cysteine and cysteine derviatives in aqueous and DMF solutions involves the formation of RS-CrO(3)(-) complexes. The Cr(VI)-thiolate complexes are more stable in DMF than in aqueous solution, and their stability towards reduction in aqueous solution follows the order cysteine < N-acetylcysteine < gamma-glutamylcysteine < glutathione.     

Coordination chemistry and biological activity of two tridentate ONS and NNS Schiff bases derived from S-benzyldithiocarbazate

Two tridentate Schiff bases having ONS and NNS donor sequences were prepared by condensing S-benzyldithiocarbazate (NH₂NHCSSCH₂Ph) (SBDTC) with pyridine-2-carboxaldehyde and salicylaldehyde, respectively. Complexes of these ligands with Ni^II, Zn^II, Cr^III, Co^II, Cu^II, and Sn^II were studied and characterized by elemental analyses and various physico-chemical techniques. Ni^II, Cu^II, Zn^II and Sn^II complexes were four-coordinate while the Cr^III, Sr^III and Co^III complexes were six-coordinate. The ONS Schiff base was moderately active against leukemia, while its zinc, antimony and cobalt complexes were strongly active against leukemic cells with DC₅₀ = 0.35–5.00.     

Ultrathin Carbon Film Electrodes from Vacuum‐Carbonised Cellulose Nanofibril Composite

A novel way to produce ultrathin transparent carbon layers on tin‐doped indium oxide (ITO) substrates is developed. The ITO surface is coated with cellulose nanofibrils (from sisal) via layer‐by‐layer electrostatic binding with poly(diallyldimethylammonium chloride) or PDDAC acting as the binder. The cellulose nanofibril‐PDDAC composite film is then vacuum‐carbonised at 500 °C. The resulting carbon films are characterised by atomic force microscopy (AFM), small angle X‐ray scattering (SAXS), wide‐angle X‐ray scattering (WAXS), and Raman methods. Smooth carbon films with good adhesion to the ITO substrate are formed. The electrochemical characterisation of the carbon films is based on the oxidation of hydroquinone and the reduction of benzoquinone in aqueous phosphate buffer media. A modest effect of the cellulose nanofibril‐PDDAC film on the rate of electron transfer is observed. The effect of the film on the rate of electron transfer after carbonisation is more dramatic. For a 40‐layer cellulose nanofibril‐PDDAC film after carbonisation a two‐order of magnitude change in the rate of electron transfer occurs presumably due to a better interaction of the hydroquinone/benzoquinone system with the electrode surface.     

An Interpenetrated Framework Material with Hysteretic CO2 Uptake

A new, twofold interpenetrated metal–organic framework (MOF) material has been synthesized that demonstrates dramatic steps in the adsorption and hysteresis in the desorption of CO₂. Measurement of the structure by powder X‐ray diffraction (PXRD) and pair distribution function (PDF) analysis indicates that structural changes upon CO₂ sorption most likely involve the interpenetrated frameworks moving with respect to each other.     

Reconstructing bulk isotope ratios from compound‐specific isotope ratios

Carbon isotope analysis by bulk elemental analysis coupled with isotope ratio mass spectrometry has been the mainstay of δ¹³C analyses both at natural abundance and in tracer studies. More recently, compound‐specific isotope analysis (CSIA) has become established, whereby organic constituents are separated online by gas or liquid chromatography before oxidation and analysis of CO₂ for constituent δ¹³C. Theoretically, there should be concordance between bulk δ¹³C measurements and carbon‐weighted δ¹³C measurements of carbon‐containing constituents. To test the concordance between the bulk and CSIA, fish oil was chosen because the majority of carbon in fish oil is in the triacylglycerol form and ～95% of this carbon is amenable to CSIA in the form of fatty acids. Bulk isotope analysis was carried out on aliquots of oil extracted from 55 fish samples and δ¹³C values were obtained. Free fatty acids (FFAs) were produced from the oil samples by saponification and derivatised to fatty acid methyl esters (FAMEs) for CSIA by gas chromatography/combustion/isotope ratio mass spectrometry. A known amount of an internal standard (C15:0 FAME) was added to allow analyte quantitation. This internal standard was also isotopically calibrated in both its FFA (δ¹³C = ?34.30‰) and FAME (δ¹³C = ?34.94‰) form. This allowed reporting of FFA δ¹³C from measured FAME δ¹³C values. The bulk δ¹³C was reconstructed from CSIA data based on each FFA δ¹³C and the relative amount of CO₂ produced by each analyte. The measured bulk mean δ¹³C (SD) was ?23.75‰ (1.57‰) compared with the reconstructed bulk mean δ¹³C of ?23.76 (1.44‰) from CSIA and was not significantly different. Further analysis of the data by the Bland‐Altman method did not show particular bias in the data relative to the magnitude of the measurement. Good agreement between the methods was observed with the mean difference between methods (range) of 0.01‰ (?1.50 to 1.30). Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and characterization of standard reference material 1849 infant/adult nutritional formula

Standard Reference Material (SRM) 1849 Infant/Adult Nutritional Formula has been issued by the National Institute of Standards and Technology (NIST) as a replacement for SRM 1846 Infant Formula, issued in 1996. Extraction characteristics of SRM 1846 have changed over time, as have NIST's analytical capabilities. While certified mass fraction values were provided for five constituents in SRM 1846 (four vitamins plus iodine), certified mass fraction values for 43 constituents are provided in SRM 1849 (fatty acids, elements, and vitamins) and reference mass fraction values are provided for an additional 43 constituents including amino acids and nucleotides, making it the most extensively characterized food-matrix SRM available from NIST.     

Corrigendum to “EuBaFe2O5+w: Valence mixing and charge ordering are two separate cooperative phenomena” [J. Solid State Chem. 180 (2007) 148-157]

An error in the expression for the Fe²⁺, Fe³⁺ valence-mixing probability in RBaFe₂O_5+w is acknowledged and correct formula is derived. The new formula slightly improves the least-squares fit to the experimental concentrations of the Mössbauer component Fe^2.5+ as a function of the oxygen-nonstoichiometry parameter w for R=Eu.     

A Rechargeable Al/S Battery with an Ionic‐Liquid Electrolyte

Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite‐free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg^?1) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlS_x. Herein, we demonstrate the first reversible Al/S battery in ionic‐liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid‐state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid‐state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.     

Click Chemistry Mediated Functionalization of Vertical Nanowires for Biological Applications

Semiconductor nanowires (NWs) are gaining significant importance in various biological applications, such as biosensing and drug delivery. Efficient and controlled immobilization of biomolecules on the NW surface is crucial for many of these applications. Here, we present for the first time the use of the Cu^I‐catalyzed alkyne–azide cycloaddition and its strain‐promoted variant for the covalent functionalization of vertical NWs with peptides and proteins. The potential of the approach was demonstrated in two complementary applications of measuring enzyme activity and protein binding, which is of general interest for biological studies. The attachment of a peptide substrate provided NW arrays for the detection of protease activity. In addition, green fluorescent protein was immobilized in a site‐specific manner and recognized by antibody binding to demonstrate the proof‐of‐concept for the use of covalently modified NWs for diagnostic purposes using minute amounts of material.     

Insights into electrolytic stabilization with weak polarization as treatment for archaeological copper objects

Immersion of corroded copper artefacts in dilute sodium sesquicarbonate solution is a well-recognized stabilization technique—especially in the conservation of objects recovered from marine environments and therefore saturated with chlorides. Here we describe three linked experiments performed to investigate a variation on this treatment, involving the application of a low potential to the artefact in order to drive the chloride extraction process. This includes a new spectroelectrochemical approach which allows 2-D pseudorandom X-ray reflection diffraction patterns to be obtained without interrupting the reaction in solution. Experiments were carried out on synthetically produced chloride layers on copper (nantokite and atacamite). We show that a thick chloride layer is, in general, replaced by a thin cuprite layer through a mechanism which involves detachment of the chloride crystallites from the surface prior to dissolution.