New 1,1-amino hydroperoxides from regioselective oxygenation of 4-(n-arylmethyleneamino)-2,6-di-t-butylphenols.

The oxygenation of 4-(N-arylmethyleneamino)-2,6-di-$\text{t}$-butylphenols with Co(Salpr), a five coordinate Co(II0 Schiff base complex, in CH₂Cl₂ results in the regioselective hydroperoxylation at the imino carbon to give N-(l-aryl-l-hydroperoxymethyl)-3,5-di-$\text{t}$-butyl-$\text{p}$-benzoquinone monoimines, which give exclusively the corresponding amides and 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone in an aerobic solution of KOH in 90% EtOH.     

Efficient photochemical oxetane formation from 1-methyl-2,4,5-triphenylimidazole and benzophenones

In contrast to simple imidazoles, 1-methy1–2,4,5-triphenylimidazole ($\text{1}$) produced stable oxetane photoadducts $\text{3b}$ - $\text{e}$ with good efficiency upon irradiation in the presence of benzophenone derivatives $\text{2b}$ - $\text{e}$ in acetonitrile solution. Irradiation in the solid-phase was also studied. The oxetanes $\text{3b}$ - $\text{e}$ readily underwent cycloreversion by acid catalysis or by heating.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Facile construction and divergent transformation of polycyclic isoxazoles: direct access to polyketide architectures

[reaction: see text] Base-promoted cyclocondensation of C-chloro oximes with cyclic 1,3-diketones affords functionalized isoxazoles in good yield and under convenient reaction conditions. This process enables the synthesis of highly substituted products with notable functional group tolerance. The products obtained are directly converted to a variety of polyketide-derived polycyclic structures including xanthenes, anthracenes, and benzophenones.     

SPECIFIC PHOTOCOUPLING OF 5-BROMOURIDINE TO TRYPTOPHAN IN AQUEOUS FROZEN SOLUTION§

Abstract —5-Bromouridine (BrUd) photochemically reacted with l -tryptophan (trp) only in aqueous frozen solution giving rise to 2-[1,2,3,4-tetrahydro-1-(β-d -ribofuranosyl)-2,4-dioxo-5-pyrimidinyl]-l -tryptophan ( 1a ). Under similar conditions irradiation of 5-bromouracil (BrU) and trp gave the corresponding coupled product 2. Addition of acetone, potassium carbonate or sodium chloride to the frozen system completely inhibited the photocoupling reaction. These photocoupling reactions are suggested to proceed via mixed aggregate formation between trp and BrUd (or BrU) in frozen aqueous solution. Stacking interactions in these aggregates are characterized by an efficient quenching of trp fluorescence by BrUd. Under the same conditions other amino acids such as phenylalanine, tyrosine, histidine and lysine did not react with BrUd, indicating that the photocoupling of BrUd (or BrU) is specific for trp.     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

Amidase and peptidase activities of polyclonal immunoglobulin G present in the sera of patients with rheumatoid arthritis

Polyclonal Immunoglobulin (Ig) G from patients with rheumatoid arthritis (RA) and healthy subjects hydrolyzed carbobenzoxy−Val−Gly−Arg p-nitroanilide and D−Pro−Phe−Arg p-nitroanilide. RA IgG exhibited higher activity against the former substrate, but not the latter. On the other hand, RA IgG showed reduced activity against D−Pro−Phe−Arg methylcoumarinamide, when compared with those of the healthy controls. These results suggest that RA IgGs differ from normal IgGs in the substrate specificity of amidase activity. Preliminary studies have shown that two out of three RA IgG samples cleaved a pentapeptide—Gln−Arg−Arg−Arg−Ala−Ala— which is assumed to be associated with the risk of developing RA (Gregersen, P. K. et al. (1987), Arthritis Rheum. 30, 1205–1213). By contrast, virtually no cleavage of the same peptide was observed with IgG from healthy controls. A peptide analog, Gln−Arg−Arg−Trp−Ala, was not cleaved at all by any IgGs examined either from RA patients or healthy controls.     

Thermodynamic properties of the Cu-Au system using a face-centered-cubic lattice model with a renormalized potential

A Monte Carlo simulation is carried out to study thermodynamic properties of Cu-Au alloys using a face-centered-cubic (fcc) lattice-gas model. To obtain quantitatively accurate results, a Finnis-Sinclair-type potential, which has been widely used for molecular dynamics (MD) simulations, is employed. To overcome some shortcomings of lattice-gas models such as neglecting vibrational entropy, the potential is mapped onto the fcc lattice using the renormalization technique. The renormalized potential gives an improved Cu-Au phase diagram compared to the original MD potential applied directly on the lattice.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.