Polyesterification of aromatic dicarboxylic acids and bisphenols with tosyl chloride/dimethylformamide/pyridine promoted by the improvement of the difficult solubility of the activated diacids with lithium chloride

The solution polyesterification of dicarboxylic acids in pyridine, the activated intermediates of which were difficult to dissolve in tosyl chloride/dimethylformamide/pyridine, was investigated in the presence of lithium chloride. The solubility of the activated dicarboxylic acids was largely improved by the presence of the salt, and the polycondensation with bisphenols was greatly facilitated. The salt was more effectively added to a pyridine solution of dicarboxylic acids than to the activated dicarboxylic acids in pyridine. The favorable additive effect on the improved solubility was attributed to a lowered degree of association of the activated dicarboxylic acids, which led to distributions of the resulting oligomers from bisphenols at an earlier stage closer to the theoretical ones and yielded better polycondensation results. The reaction, which proceeded through favorable distributions of the co‐oligomers, produced copolymers of higher inherent viscosities and slightly block sequence distributions determined by NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2725–2733, 2004     

Micropore-free surface-activated carbon for the analysis of polychlorinated dibenzo-p-dioxins-dibenzofurans and non-ortho-substituted polychlorinated biphenyls in environmental samples

2,3,7,8-Substituted polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and non-ortho-substituted polychlorinated biphenyls (PCBs) account for almost all of the total toxic equivalents (TEQ) in environmental samples. Activated carbon columns are used to fractionate the samples for GC-MS analysis or bioassay. Micropore-free surface-activated carbon is highly selective for PCDD/Fs and non-ortho-PCBs and can improve the conventional activated carbon column clean-up. Along with sulfuric acid-coated diatomaceous earth columns, micropore-free surface-activated carbon provides a rapid, robust, and high-throughput sample preparation method for PCDD/Fs and non-ortho-PCBs analysis.     

Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores

Gold nanoparticles have been conformally coated with amorphous silica (using a sol-gel method) and then an organic polymer (via surface-grafted, atom transfer radical polymerization) to form spherical colloids with a core-double-shell structure. The thickness of silica and polymer shells could be conveniently controlled in the range of tens to several hundred nanometers by changing the concentration of the reagent and/or the reaction time. Selective removal of the silica layer (through etching in aqueous HF) led to the formation of hollow polymer beads containing movable gold cores. This new form of core-shell particles provides a unique system for measuring the feature size and transport property associated with hollow particles. In one demonstration, we showed that the thickness of a closed polymer shell could be obtained by mapping the electrons backscattered from the core and shell. In another demonstration, the plasmon resonance band of the gold cores was used as an optical probe to follow the diffusion kinetics of chemical reagents across the polymer shells.     

OBSERVATION OF THE PICOSECOND TIME-RESOLVED SPECTRUM OF SQUID BATHORHODOPSIN AT ROOM TEMPERATURE

Difference spectra between squid rhodopsin and its bathorhodopsin at room temperature were measured ca. 150 ps and ca. 500 ps after the excitation at 347.2 nm by a double-beam picosecond time-resolved spectrometer. The spectra measured showed a red shift of the isosbestic point between squid rhodopsin and its bathorhodopsin and a lower ΔA_max/ΔA_min value compared with those measured at low temperatures by conventional spectrophotometry.     

Ruthenium-catalyzed arylation of 2-alkenylpyridines with aryl bromides: alternative E,Z-selectivity to Mizoroki-Heck reaction

Regio- and stereoselective arylation of 2-alkenylpyridines with aryl bromides is catalyzed by specific Ru(II)-phosphine complexes affording beta-arylated (Z)-2-alkenylpyridines, in which the aryl moiety is introduced cis to the pyridyl group. This geometrical selectivity is in sharp contrast to the Mizoroki-Heck reaction. [reaction: see text]     

Ab initio potential energy surfaces of the ion-molecule reaction: C2H2 + O+

High level ab initio calculations using complete active space self-consistent field and multi reference single and double excitation configuration interaction methods with cc-pVDZ (correlation consistent polarized valence double zeta) and cc-pVTZ (triple zeta) basis sets have been performed to elucidate the reaction mechanism of the ion-molecule reaction, C2H2(1Sigmag+) + O+(4S), for which collision experiment has been performed by Chiu et al. [J. Chem. Phys. 109, 5300 (1998)]. The minor low-energy process leading to the weak spin-forbidden product C2H2+ (2Piu) + O(1D) has been studied previously and will not be discussed here. The major pathways to form charge-transfer (CT) products, C2H2+ (2Piu) + O(3P) (CT1) and C2H2+ (4A2) + O(3P) (CT2), and the covalently bound intermediates are investigated. The approach of the oxygen atom cation to acetylene goes over an energy barrier TS1 of 29 kcal/mol (relative to the reactant) and adiabatically leads the CT2 product or a weakly bound intermediate Int1 between CT2 products. This transition state TS1 is caused by the avoided crossing between the reactant and CT2 electronic states. As the C-O distance becomes shorter beyond the above intermediate, the C1 reaction pathway is energetically more favorable than the Cs pathway and goes over the second transition state TS2 of a relative energy of 39 kcal/mol. Although this TS connects diabatically to the covalent intermediate Int2, there are many states that interact adiabatically with this diabatic state and these lead to the other charge-transfer product CT1 via either of several nonadiabatic transitions. These findings are consistent with the experiment, in which charge transfer and chemical reaction products are detected above 35 and 39 kcal/mol collision energies, respectively.     

Formation process of silver-polypyrrole coaxial nanocables synthesized by redox reaction between AgNO3 and pyrrole in the presence of poly(vinylpyrrolidone)

We have recently demonstrated a one-step process to fabricate silver-polypyrrole (PPy) coaxial nanocables (Chen, A.; Wang, H.; Li, X. Chem. Commun. 2005, 14, 1863). The formation process of silver-PPy coaxial nanocables is discussed in this article. It was found from the results of TEM and SEM images that large numbers of silver atoms were formed when AgNO3 was added to a pyrrole solution. Then silver atoms transform to silver-PPy nanosheets with regular morphology, which will connect together to be more stable. Silver-PPy nanocables will be able to grow at the expense of the silver-PPy nanosheets. Poly(vinylpyrrolidone) (PVP) plays crucial roles in this process: as a capping agent to form silver nanowires, and as a dispersant of pyrrole monomers, which can influence the site at which pyrrole monomer exists. On the basis of experimental analysis, the possible mechanism was proposed. Because of the effect of PVP, silver ions and pyrrole monomers are apt to be adsorbed at the [111] and [100] facets of silver nanosheets, respectively. Obvious polymerization will take place on the boundary of the [111] and [100] facets. The PPy layer stays stable on the [100] facets. Meanwhile, newly formed silver atoms and silver nanosheets will further ripen and grow on the [111] facets. In a word, the morphology of final products and the formation process are determined by the reaction site between AgNO3 and the pyrrole monomer, which is influenced by PVP.     

A highly cis-selective synthesis of 2-ethynylaziridines by intramolecular amination of chiral bromoallenes: improvement of stereoselectivity based on the computational investigation

The base-mediated intramolecular amination of bromoallenes having an axial chirality is described. The treatment of (4S,aR)-4-alkyl-4-[N-(arylsulfonyl)amino]-1-bromobuta-1,2-dienes with NaH in DMF affords 2,3-cis-2-ethynylaziridines in good to excellent selectivity (2,3-cis:trans = 92:8-99:1). The reaction of (4S,aS)-bromoallenes with NaH/DMF also gives 2,3-cis-2-ethynylaziridines selectively (79:21-91:9). These experimental results have been rationalized by B3LYP density functional calculations together with the 6-31+G(d) basis set and the Onsager solvation model. The transition structures for cis-aziridine formation of both (4S,aR)- and (4S,aS)-bromoallenes in DMF are favored over the corresponding trans transition structures by 4.35 and 1.41 kcal/mol, respectively. Furthermore, the calculations predicted that a less polar solvent gives higher cis selectivity for (4S,aS)-bromoallenes. In fact, improvement of the cis selectivity to 99:1 has been realized by using a less polar solvent such as THF. The cyclization of bromoallenes bearing a beta- or gamma-amino group also affords four- and five-membered azacycles in a highly cis-selective manner.     

A practical synthesis of archaeosine and its base

A practical synthetic route to 7-formamidino-7-deazaguanosine (archaeosine), a hypermodified nucleoside observed in archaeal tRNA, has been developed, which involves the addition of hydroxylamine to the cyano group of 7-cyano-7-deazaguanosine (preQ₀-nucleoside) and a subsequent Pd-catalyzed hydrogenation. PreQ₀-nucleoside was obtained from an optimized β-selective glycosylation developed by Hocek et al. The corresponding archaeosine base was subsequently synthesized in high yield from its precursor 7-cyano-7-deazaguanine (preQ₀).