Analysis of nucleotides by pressure-assisted capillary electrophoresis-mass spectrometry using silanol mask technique

A method for the determination of nucleotides based on pressure-assisted capillary electrophoresis-electrospray ionization mass spectrometry (PACE-MS) is described. To prevent multi-phosphorylated species from adsorbing onto the fused-silica capillary, silanol groups were masked with phosphate ions by preconditioning the capillary with the background electrolyte containing phosphate. During preconditioning, nebulizer gas was turned off to avoid contamination of MS detector with phosphate ions. To detect nucleotides using the CE positive mode at a pH 7.5, it was necessary to apply air pressure to the inlet capillary during electrophoresis to supplement the electroosmotic flow (EOF) toward the cathode. Moreover, we exchanged the running electrolyte every analysis using the buffer replenishment system to obtain the required reproducibility. Under the optimized conditions, 14 phosphorylated species such as nucleotides, nicotinamide-adenine dinucleotides and coenzyme A (CoA) compounds were well determined in less than 20 min. The relative standard deviations (n=6) of the method were better than 0.9% for migration times and between 1.7% and 8.1% for peak areas. The detection limits for these species were between 0.5 and 1.7 micromol/L with pressure injection of 50 mbar for 30 s (30 nL) at a signal-to-noise ratio of 3. This approach is robust and quantitative compared to the previous method, and its utility is demonstrated by the analysis of intracellular nucleotides and CoA compounds extracted from Escherichia coli wild type, pfkA and pfkB knockout mutants. The methodology was used to suggest that pfkA is the main functional enzyme.     

Total synthesis of borrelidin

The total synthesis of borrelidin has been achieved. The best feature of our synthetic route is macrocyclization at C11-C12 for the construction of an 18-membered ring after esterification between two segments. A detailed examination of the macrocyclization led us to the samarium(II) iodide-mediated intramolecular Reformatsky-type reaction as the most efficient synthetic approach. The two key segments were synthesized through regioselective methylation, directed hydrogenation, stereoselective Reformatsky-type reaction, and MgBr2.Et2O-mediated chelation-controlled allylation.     

In Vitro Analyses of Spinach-Derived Opioid Peptides,Rubiscolins: Receptor Selectivity and Intracellular Activities through G Protein- and β-Arrestin-Mediated Pathways

Activated opioid receptors transmit internal signals through two major pathways: the G-protein-mediated pathway, which exerts analgesia, and the β-arrestin-mediated pathway, which leads to unfavorable side effects. Hence, G-protein-biased opioid agonists are preferable as opioid analgesics. Rubiscolins, the spinach-derived naturally occurring opioid peptides, are selective δ opioid receptor agonists, and their p.o. administration exhibits antinociceptive effects. Although the potency and effect of rubiscolins as G-protein-biased molecules are partially confirmed, their in vitro profiles remain unclear. We, therefore, evaluated the properties of rubiscolins, in detail, through several analyses, including the CellKey^TM assay, cADDis^® cAMP assay, and PathHunter^® β-arrestin recruitment assay, using cells stably expressing µ, δ, κ, or µ/δ heteromer opioid receptors. In the CellKey^TM assay, rubiscolins showed selective agonistic effects for δ opioid receptor and little agonistic or antagonistic effects for µ and κ opioid receptors. Furthermore, rubiscolins were found to be G-protein-biased δ opioid receptor agonists based on the results obtained in cADDis^® cAMP and PathHunter^® β-arrestin recruitment assays. Finally, we found, for the first time, that they are also partially agonistic for the µ/δ dimers. In conclusion, rubiscolins could serve as attractive seeds, as δ opioid receptor-specific agonists, for the development of novel opioid analgesics with reduced side effects.     

The Rapid Measurement of ABO Blood Type by Using SPR(Surface Prasmon Resonance) Sensor

The conventional measurement of ABO blood-types is visual inspection method based on the aggregation reaction with monoclonal antibody. But, this method takes a long time (one night) and requires the skilled analyzer to decide the blood-types for the saliva and bloodstain sample. Therefore, the rapid and sensitive measurement of ABO blood type has been required for the saliva and bloodstain on the clothes. Surface prasmon resonance (SPR) is an optical technique, which has been applied to biosensing. In this study, the rapid and sensitive measurement of ABO blood-types were investigated by using SPR sensing system.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Effect of calcination temperature on the microstructure of porous TiO<Subscript>2</Subscript> film

To obtain porous TiO₂ film, the precursor sol was prepared by hydrolysis of Ti isopropoxide and then complexed with trehalose dihydrate. The porous TiO₂ film was fabricated by the dip-coating technique on glass substrates using this solution. The TiO₂ film was calcined at 500 °C. The maximum thickness of the film from one-run dip-coating was ca. 740 nm. The film was composed of nanosized particle and pores. The porosity of the TiO₂ film was increased by addition of trehalose dihydrate to the sol. The porous TiO₂ films were calcined at different temperatures. The effects of calcination temperature on the microstructure of the porous TiO₂ film were investigated. The porous film prepared from sol containing trehalose still kept the porous structure after calcination at 950 °C. The phase transition temperature of the film from anatase to rutile was shifted from 650 to 700 °C by addition of trehalose to the sol.     

Statistical mixture design investigation of fractionated and total extracts from Erythrina speciosa Andrews leaves

The simplex centroid mixture design for the ethanol, dichloromethane, hexane and acetone solvents has been applied to the extraction of crude mass and the fiber, organic, neutral and basic fractions as well as the fractionation residues of Erythrina speciosa Andrews leaves. Binary and ternary synergic solvent interactions are seen to provide dominant contributions to the extraction of both crude mass and all the fractions. Quadratic and special cubic mixture models precisely predict the extracted quantities of each fraction and the residue as a function of the proportions of the four solvents. Different solvent mixtures are found to be the most efficient extractors for the different fractions: binary dichloromethane‐hexane mixtures for the fiber fraction, ternary ethanol‐dichloromethane‐acetone mixtures for the neutral fraction, binary ethanol‐dichloromethane mixtures for the organic fraction, crude extract and residue values and ternary ethanol‐dichloromethane‐hexane mixtures for the basic fraction. Principal component analysis shows that the ethanol‐dichloromethane mixtures are important for extracting large quantities of the basic and organic fractions as well as of the residue and crude masses.     

Effects of grafted polymer chains on lamellar membranes

We have investigated the effects of grafted polymer chains [poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)] on the bending modulus and the intermembrane interactions of lamellar membranes (C(12)E(5) water) by means of a neutron spin-echo and a small-angle x-ray scattering technique. In this study the hydrophilic chain takes the mushroom configuration on the membrane. The bending modulus of the polymer-grafted membranes increases in proportion to the square of the end to end distance of the polymer chain, which agrees well with the theoretical prediction of Hiergeist and Lipowsky [J. Phys. II 6, 1465 (1996)]. From the interlamellar interaction point of view, the mushroom layer is renormalized to the membrane thickness, which enhances the repulsive Helfrich interaction. When the size of the decorated polymer chain increases to the interlamellar distance, however, the mushroom is squeezed so as to optimize the interlamellar potential. Further increase of the grafted polymer size brings a lamellar-lamellar phase separation, where the grafted polymer chains are localized in the dilute lamellar phase and the concentrated lamellar phase forms the onionlike texture.     

Capillary electrophoretic system incorporating an UV/CL dual detector

We developed a capillary electrophoretic system incorporating an ultra-violet absorption (UV)/chemiluminescence (CL) dual detector, taking advantage of the CL reaction of luminol-hydrogen peroxide and the batch-type CL detection cell. UV detection was carried out using the on-capillary method while CL detection was performed using the end-capillary method. Examination of isoluminol isothiocyanate (ILITC) as a model sample revealed two main peaks with UV detection and one main peak with CL detection. The first peak in the UV detection data corresponded to the main peak in the CL detection data. We then determined that the ILITC sample included natural ILITC as well as an impurity that had absorption behavior but did not have CL properties and labeling ability. Furthermore, the components of a mixture containing glycine, glycylglycine and glycylglycylglycine, all labeled with ILITC, were well separated and detected using the present system. The present system easily, rapidly, and simultaneously produces useful information due to the presence of both UV and CL detectors.     

Synthesis, structural characterization, and catalytic performance of dititanium-substituted gamma-Keggin silicotungstate

A novel titanium-substituted silicotungstate cluster of [{gamma-SiTi2W10O36(OH)2}2(mu-O)2]8- (1) is synthesized by the introduction of titanium(IV) ions into a divacant lacunary gamma-Keggin-type silicotungstate of [gamma-SiW10O36]8-. This titanium-substituted polyoxometalate, 1, exhibits a dimeric structure. One half of the gamma-Keggin fragment of 1 contains a dinuclear titanium center bridged by two hydroxo groups, and the resulting Ti2(mu-OH)2 core connects to the other Ti2(mu-OH)2 core of the paired gamma-Keggin subunit through Ti-O-Ti linkages. The Ti2(mu-OH)2 core of 1 reacts with MeOH to form the corresponding alkoxo derivative, [{gamma-SiTi2W10O36(OH)(OMe)}2(mu-O)2]8- (2). Two of four hydroxo groups of the Ti2(mu-OH)2 cores in 1 are replaced by methoxo groups to give the Ti2(mu-OH)(mu-OMe) core, and the Ti-O-Ti linkages connecting two gamma-Keggin subunits are maintained in 2. The gamma-Keggin dititanium-substituted silicotungstate 1 catalyzes mono-oxygenation reactions, such as the epoxidation of olefins and sulfoxidation of sulfides with hydrogen peroxide under mild conditions, while the monotitanium-substituted silicotungstate, [alpha-SiTiW11O39]4- (3), and the fully occupied silicododecatungstate, [gamma-SiW12O40]4-, are inactive. The epoxidation with 1 is stereospecific; the configurations around the C=C double bonds of the cis- and trans-olefins are completely retained in the corresponding epoxides. For the competitive epoxidation of cis- and trans-2-octenes, the ratio of the formation rate of cis-2,3-epoxyoctane to that of the trans isomer (R(cis)/R(trans)) is relatively high (21.3) in comparison with those observed for the tungstate catalysts, including [gamma-SiW10O34(H2O)2]4-. The epoxidation of 3-methyl-1-cyclohexene is highly diastereoselective and gives the corresponding epoxide with an anti configuration. The molecular structure of 1 is preserved during the catalysis because the 29Si and 183W NMR spectra of the catalyst recovered after completion of the oxidation are consistent with those of as-prepared compound 1. All these facts suggest the contribution of rigid nonradical oxidants generated on the multinuclear titanium center of 1.