Comparison of total folate concentrations in foods determined by microbiological assay at several experienced U.S. commercial laboratories

Analysis of total folate concentration measured by microbiological assay in a variety of foods submitted in a routine manner to experienced laboratories that regularly perform folate analysis on fee-for-service basis was evaluated. Homogenates of fresh strawberries, frozen spinach, orange juice, frozen meat and vegetable pizza, dry macaroni, and dried pinto beans were prepared and stored under conditions previously determined to maintain stability of folate content. An aliquot of each composite and of 3 certified reference materials were sent on each of 4 occasions to 4 laboratories. Results for macaroni and pizza, the only folic acid-fortified foods, had considerably lower between-laboratory variation (CV(B)) with CV(B) of 9-11% versus >45% for other foods. Mean total folate ranged from 14 to 279 microg/100 g for a mixed vegetable reference material, from 5 to 70 microg/100 g for strawberries, and from 28 to 81 microg/100 g for wholemeal flour. Only 1 laboratory reported using a tri-enzyme extraction, and all laboratories used folic acid fortified foods as internal control materials. Users of commercial total folate analysis should understand the uncertainty in values determined by microbiological assay, particularly for foods containing primarily naturally occurring folate, which may not be apparent when replicate samples are not submitted for analysis.     

Kinetic and equilibria studies of the aquation of the trinuclear platinum phase II anticancer agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464)

The hydrolysis profile of the bifunctional trinuclear phase II clinical agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464, 1) has been examined using [(1)H,(15)N] heteronuclear single quantum coherence (HSQC) 2D NMR spectroscopy. Reported are estimates of the rate and equilibrium constants for the first and second aquation steps, together with the acid dissociation constant (pK(a1) approximately equal to pK(a2) approximately equal to pK(a3)). The equilibrium constants for the aquation determined by NMR at 298 and 310 K (I = 0.1 M, pH 5.3) are similar, pK(1) = pK(2) = 3.35 +/- 0.04 and 3.42 +/- 0.04, respectively. At lower ionic strength (I = 0.015 M, pH 5.3) the values at 288, 293, and 298 K are pK(1) = pK(2) = 3.63 +/- 0.05. This indicates that the equilibrium is not strongly ionic strength or temperature dependent. The aquation and anation rate constants for the two-step aquation model at 298 K in 0.1 M NaClO(4) (pH 5.3) are k(1) = (7.1 +/- 0.2) x 10(-5) s(-1), k(-1) = 0.158 +/- 0.013 M(-1) s(-1), k(2) = (7.1 +/- 1.5) x 10(-5) s(-1), and k(-2) = 0.16 +/- 0.05 M(-1) s(-1). The rate constants in both directions increase 2-fold with an increase in temperature of 5 K, and rate constants increase with a decrease in solution ionic strength. A pK(a) value of 5.62 plus minus 0.04 was determined for the diaqua species [(trans-Pt(NH(3))(2)(OH(2)))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)-NH(2))(2))](6+) (3). The speciation profile of 1 under physiological conditions is explored and suggests that the dichloro form predominates. The aquation of 1 in 15 mM phosphate was also examined. No slowing of the initial aquation was observed, but reversible reaction between aquated species and phosphate does occur.     

Tetramethylcyclopentadienylselenium derivatives

Bis(1,2,3,4-tetramethylcyclopentadienyl)selane (1) has been prepared by the reaction of tetramethylcyclopentadienyllithium (Cp(t)Li) with selenium bis(diethyldithiocarbamate). Treatment of Cp(t)Li with elemental selenium, followed by air oxidation, led to loss of the allylic hydrogen atom, and formation of the novel tricyclic compound 1,4,5,6,7,10,11,12-octamethyltricyclo[7.3.0.0]-2,8-diselenadodeca-3,5,9,11-tetraene (2). The sulfur analogue of 2 has been obtained by a similar procedure. The X-ray crystal structures of compounds 1 and 2 have been determined, and the molecular geometry observed for has been probed using DFT calculations.     

Amidrazones. VII. Formation of s-triazines by thermolysis of N1-benzyl-substituted amidrazone ylides

The preparation of ylides of the general structure is described. Thermolysis of 14a (R = CH₃, R' = H, Ar = C₆H₅) gave dimethylamine and 2,4-dimethyl-6-phenyl-s-triazine. Thermolysis of ylides 14b (R = C₆H₅; R' = CH₃, Ar = C₆H₅) and 14c (R = C₆H₅, R' = CH₃, Ar = p-tolyl) gave dimethylamine, ArCH = NCH₃ and 1-methyl-2-Ar-4,6-diphenyl-1,2-dihydro-s-triazines ( 19a,b ). Triazines 19a and 19b were also prepared by condensation of N-methylbenzamidine with benzaldehyde and p-tolualdehyde, respectively. Thermolysis of 14d (R = C₆H₅, R¹ = CH₂C₆H₅,Ar = C₆H₅) gave 1-benzyl-2,4,6-triphenyl-1,2-dihydro-s-triazine ( 19c ) and N-benzylidenebenzylamine. Mechanistic aspects of these reactions are discussed.     

Complexation of Cu2+ by Binucleating Macrocycles Containing the N6 Donor Set

The hexadentate ligands 1,4,7,12,15,18-hexaazacyclododecosane ([2]aneN₆) and 1,4,7,14,17,20-hexaazacyclohexacosane ([26]aneN₆) both form eight complexes with Cu²⁺, three of them being binuclear. The corresponding stability constants have been determined potentiometrically, and the electronic absorption spectra have been obtained from spectrophotometric data. Possible interactions of the Cu²⁺ pairs in the three binuclear complexes have, in addition, been investigated by ESR and and linear -sweep voltammetry (LSV). The binuclear complex of [22]aneN₆ with one addditional OH group is exceptionally stable, ESR-silent, and the results of the LSV-experiments are characteristically different from those of the other binuclear complexes with both ligands. This indicates that [22]aneN₆ forms a very stable hydroxo-bridged binuclear Cu²⁺ complex Cu₂L(OH)³⁺, whereas in the case of [26]andN₆ no bridged Cu²⁺ pair exists.     

Synthesis and anti-cancer activity of dinuclear platinum(II) complexes containing bis(thioalkyl)dicarba-closo-dodecaborane(12) ligands

A series of novel, dinuclear (2,2':6',2'-terpyridine)platinum(ii) complexes containing bis(thioalkyl)-dicarba-closo-dodecaborane(12)(carborane) ligands were prepared and characterised, and their preliminary anti-cancer characteristics have been determined in vitro; the complexes are the first examples of bis-intercalator complexes containing a boron-rich carborane cage.     

A model for quantitatively describing linear velocity programming in capillary SFC

Summary Linear velocity in capillary SFC is commonly controlled by restricting capillaries. In this paper, a model is described that quantitatively predicts the linear velocity of a supercritical fluid in SFC using tapered or ceramic frittype restrictors. In this model, the flow from the restricting capillary is assumed to be an isentropic expansion. The variation of the linear velocity as a function of pressure, temperature and cross-sectional area of the restricting aperture was predicted by this model. This predictive capability is important to the use of gradient programming in capillary SFC. Finally, the ideal variable restrictor for gradient programming was found to be one that could reversibly increase or decrease the linear velocity independent of the pressure, temperature, and/or density conditions used to create the gradient.     

Determination of deoxynivalenol in cereals and cereal products by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered a applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200-2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values < 1.3.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.