Synthesis and photo-induced dissolution of polymers bearing imino sulfonate groups

Novel photosensitive polymers were synthesized by the copolymerization of methyl methacrylate and 1,2,3,4-tetrahydro-1-naphthylideneimino p-styrenesulfonate (NISS) and by the ternary polymerization of methyl methacrylate, methacrylic acid, and 9-fluorenylideneiminop-styrene-sulfonate (FISS). NISS and FISS units showed good sensitivity to light of wavelengths below 300 nm and below 366 nm, respectively. Although the polymers were insoluble in aqueous alkaline solutions, on irradiation with UV light they became soluble in aqueous alkaline solutions. A remarkable decrease in molecular weight of the polymers was observed during the photolysis of imino sulfonate groups incorporated into the polymers, which assisted the dissolution of the irradiated polymers.     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Estimation of molecular diffusivity in aqueous solution of acetonitrile by the Wilke-Chang equation

It was tried to estimate the molecular diffusivity (D(m)) of solutes in the mixtures of acetonitrile (ACN) and water by the Wilke-Chang equation. Although the information about association coefficient (α) is necessary for the calculation, it has never been proposed for ACN. The value of α was estimated as 1.37 from D(m) of benzene in ACN at 303 K experimentally measured by the peak parking method. The values of α, i.e. 2.6, 1.9, 1.5, and 1.0, which have respectively been proposed for four solvents, i.e. water, methanol, ethanol, and benzene, were correlated with two physico-chemical parameters of the solvents, i.e. solubility parameter and E(T) value. The α value for ACN was plotted around the two correlations, indicating its appropriateness. The values of D(m) calculated by the Wilke-Chang equation using the α value for ACN were compared with those measured by the peak parking method and the Aris-Taylor method in aqueous solutions of ACN. The mean square deviation of the estimation of D(m) was calculated as 8.8 and 14%. It was demonstrated that the Wilke-Chang equation can be used for estimating D(m) with a reasonable accuracy in the mixtures consisting of ACN and water.     

Results of 0.5% cold-leg small-break LOCA experiments at ROSA-IV/LSTF: Effect of break orientation

Three 0.5% cold-leg small-break loss-of-coolant accident (SBLOCA) experiment were conducted at the ROSA-IV Large Scale Test Facility (LSTF) to investigate the effects of break orientation on system thermal-hydraulic responses. In these three experiments, the break hole was located at the side, bottom, and top of the horizontal cold leg, respectively. Although the key phenomena observed in the three experiments were basically the same, the break flow rate was affected by the break orientation when phase stratification occured in the cold leg; the break flow rate was largest for the side break and smallest for the top break. The RELAP5/MOD2 code failed to predict the difference in the break flow rate observed in the experiments. Modification to the break flow calculation models, for both subcooled and two-phase flow discharge conditions, resulted in good agreement between data and predictions.     

Non-symmetric calamitic liquid crystal dimers containing troponoid and benzenoid units

Five types of non-symmetric calamitic dimers were synthesized to investigate the effect of the core structure and length of the spacer on mesomorphic properties. Two non-symmetric dimers containing a troponoid and benzenoid unit showed smectic A and C phases whereas the corresponding benzenoid dimers showed no mesophase. Non-symmetric dimers with a three-ring system showed smectic A and C phases with higher transition temperatures than the two-ring system. We propose packing models for these non-symmetric dimers by considering the direction of the dipole moments of the ring structures and microsegregation between the polar units and the non-polar chains.     

Far-IR spectra of charge-transfer complexes between IX (X = Cl,Br or I) and trans-1,2-bis(4-pyridyl)ethylene, 1,2-bis(4-pyridyl)ethane and 4,4′-

Far-IR spectra of charge-transfer complexes of trans-1,2-bis(4-pyridyl)ethylene (Bpe), 1,2-bis(4-pyridyl)ethane (Bpa) and 4,4′-bipyridyl (4,4′-