Tree-gel and loop-gel conversions in nonlinear polymerization

Ａｓｉｓｗｅｌｌｋｎｏｗｎ,ｔｈｅｔｈｅｏｒｙｆｏｒｎｏｎｌｉｎｅａｒｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｗａｓｉｎｉｔｉａｔｅｄｂｙＦｌｏｒｙａｎｄＳｔｏｃｋｍａｙｅｒ[1—3].ＭｉｌｌｅｒａｎｄＭａｃｏｓｋｏ[4—6]ｐｒｏｐｏｓｅｄａｒｅｃｕｒｓｉｖｅｍｅｔｈｏｄｆｏｒｄｅａｌｉｎｇｗｉｔｈｔｈｅｐｒｏｂｌｅｍｏｆｔｈｅｐｏｓｔｇｅｌｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｎｅｔｗｏｒｋｆｏｒｍｉｎｇｐｏｌｙｍｅｒｉｚａｔｉｏｎ.Ｓｔｅｐｔｏ[7]ｉｎｖｅｓｔｉｇａｔｅｄｔｈｅｇｅｌｇｅｌｒｅａｃｔｉｏｎｏｆＲＡｆｔ…     

Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

Total synthesis of a conformationally constrained didemnin B analog

The total synthesis of a didemnin B analogue containing a conformationally constrained replacement for the isostatine moiety is reported. Synthetic highlights include an improved preparation of 2-hydroxy-3-cyclohexenecarboxylic acid and a new strategy for accessing the macrocycle.     

Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Photopolymerization induced by a benzophenone derivative photoinitiator

A benzophenone derivative photoinitiator, HBP-TDI-HQ-TDI-HBP （HTCTH）, was synthesized based on 4-hydroxy benzophenone （HBP）, toluene-2,4-diisocyanate （TDI） and hydroquinone （HQ）. HTCTH was a more effective photoinitiator which had longer wavelength absorption in the UV-vis absorption spectra than the low molecular counterpart benzophenone （BP）. It showed that both rate of polymerization （Rp） and final conversion （P） increased with increase of amine and HTCTH concentration in photopolymerization.     

3-(Triethoxysilyl)propionitrile sol-gel coating

3-(Triethoxysilyl)propionitrile (TESPN) sol-gel has been prepared under different conditions. It was employed for coating the surfaces of quartz and aluminum. Infrared (IR) and Raman spectra of TESPN and TESPN sol-gels have been recorded in the study of the sol-gel process. Transmission and reflection absorption IR (RAIR) spectra of TESPN sol-gel coated quartz and aluminum have also been collected for better understanding the film formation on the substrate surfaces. Spectra collected at different temperatures indicated that the silane film on quartz decomposes at 700 degrees C. Results from thermal gravimetric analysis (TGA) supported this result. Based on the group frequencies and the spectral behavior in different states, some vibrational modes were assigned to the observed bands. The anticorrosion behavior of the sol-gel coated aluminum in comparison with the uncoated metal was evaluated by measuring the potentiodynamic polarization and electrochemical impedance spectra (EIS).     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

论测量不确定度

讨论了测量不确定度的基本概念及应用。分析了误差和不确定度两个概念的区别，探讨了不确定度及分量的评定方法。