Li2MnO3-based composite cathodes for lithium batteries: A novel synthesis approach and new structures

A new, simple technique has been demonstrated for fabricating high-capacity composite electrode structures. In this technique, Li₂MnO₃ is leached in acid in the presence of soluble transition metal ions and subsequently annealed between 450 and 850 °C. The technique can be used to prepare a wide variety of composite compounds, in particular, a new family of ‘layered–rocksalt’ xLi₂MnO₃·(1−x)MO (e.g., M = Ni and Co) structures and modifications thereof, as well as ‘layered–layered’ xLi₂MnO₃·(1−x)LiMO₂ (e.g., M = Mn, Ni, and Co) and ‘layered–spinel’ xLi₂MnO₃·(1−x)LiM₂O₄ (e.g., M = Mn and Ni). This novel approach also holds promise for 1) synthesizing materials that reduce the extent of internal phase transitions of composite cathode structures with a high manganese content, and 2) minimizing the extent to which cells need to be electrochemically activated to remove Li₂O, thereby reducing the extent of the irreversible capacity loss on the first charge/discharge cycle.     

热处理对La0.63Gd0.2Mg0.17Ni3.1Co0.3Al0.1储氢合金微观组织和电化学性能的影响

在氩气气氛和1173 K保温条件下对La0.63 Gd0.2 Mg0.17Ni3.1 Co0.3 Al0.1储氢合金进行不同时间(t=8 ～168 h)的热处理,采用电感耦合等离子发射光谱(ICP)、X射线衍射(XRD)、电子探针显微分析方法(EPMA)和电化学测试分析方法对比研究了退火时间对合金显微组织演化和电化学性能的影响.研究结果表明,铸态合金组织由Ce2 Ni7型、Gd2Co7型、Pr5 Co19型、PuNi3型和CaCu5型相组成,其Ce2 Ni7型相的丰度为78.9％,随退火时间的延长,退火合金中Ce2 Ni7型相的丰度逐渐增加,当退火时间t=168 h时其相丰度达到94.5％,Ce2 Ni7型相结构的晶胞参数和晶胞体积随退火时间增加而减小.电化学测试分析表明,退火合金电极的电化学性能与Ce2 Ni7型相的丰度有密切关系,退火时间对合金电极的活化性能影响不大,但合金电极放电容量随退火时间的延长逐渐提高,当t=168 h时,合金电极放电容量达到最大值386.8mAh·g-1;退火时间对合金电极循环稳定性的提高和改善有不同程度的影响,当退火时间t=16～168 h时,经100次充放电循环后,其电极容量保持率S100=90.3％～91.5％.热处理能有效改善合金电极电化学反应的动力学性能,但不同退火时间对合金电极的高倍率放电性能影响不明显.     

Cadmium(II) N-acetylcysteine complex formation in aqueous solution

The complex formation between Cd(II) ions and N-acetylcysteine (H(2)NAC) in aqueous solution was investigated using Cd K- and L(3)-edge X-ray absorption and (113)Cd NMR spectroscopic techniques. Two series of 0.1 M Cd(II) solutions with the total N-acetylcysteine concentration c(H2NAC) varied between 0.2-2 M were studied at pH 7.5 and 11.0, respectively. At pH = 11 a novel mononuclear [Cd(NAC)(4)](6-) complex with the average Cd-S distance 2.53(2) ? and the chemical shift δ((113)Cd) = 677 ppm was found to dominate at a concentration of the free deprotonated ligand [NAC(2-)] > 0.1 M, consistent with our previous reports on cadmium tetrathiolate complex formation with cysteine and glutathione. At pH 7.5 much higher ligand excess ([HNAC(-)] > 0.6 M) is required to make this tetrathiolate complex the major species. The (113)Cd NMR spectrum of a solution containing c(Cd(II)) = 0.5 M and c(H2NAC) = 1.0 M measured at 288 K showed three broad signals at 421, 583 and 642 ppm, which can be attributed to CdS(3)O(3), CdS(3)O and CdS(4) coordination sites, respectively, in oligomeric Cd(II)-NAC species with single thiolate bridges between the cadmium ions.     

Rational design of 3D dendritic TiO2 nanostructures with favorable architectures

Controlling the morphology and size of titanium dioxide (TiO(2)) nanostructures is crucial to obtain superior photocatalytic, photovoltaic, and electrochemical properties. However, the synthetic techniques for preparing such structures, especially those with complex configurations, still remain a challenge because of the rapid hydrolysis of Ti-containing polymer precursors in aqueous solution. Herein, we report a completely novel approach-three-dimensional (3D) TiO(2) nanostructures with favorable dendritic architectures-through a simple hydrothermal synthesis. The size of the 3D TiO(2) dendrites and the morphology of the constituent nano-units, in the form of nanorods, nanoribbons, and nanowires, are controlled by adjusting the precursor hydrolysis rate and the surfactant aggregation. These novel configurations of TiO(2) nanostructures possess higher surface area and superior electrochemical properties compared to nanoparticles with smooth surfaces. Our findings provide an effective solution for the synthesis of complex TiO(2) nano-architectures, which can pave the way to further improve the energy storage and energy conversion efficiency of TiO(2)-based devices.     

超支化聚磷酸酯阻燃剂对尼龙6的成炭促进作用

以三氯氧磷和双酚A为原料制备了具有超支化结构的聚磷酸酯阻燃剂(HPPEA),通过红外(FTIR),核磁(1H-NMR,31P-NMR)及热重分析表征了产物的结构和热稳定性.将HPPEA与三聚氰胺聚磷酸盐(MPP)进行复配,通过熔融共混法制备阻燃尼龙6,通过氧指数法和垂直燃烧法测试了其阻燃性能,采用热重分析(TGA)研究...     

Photoluminescent Fe3O4/carbon nanocomposite with magnetic property

Fe(3)O(4)/carbon nanocomposite has been prepared by a facile chemical method, and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, fourier transform infrared spectroscopy and scanning electron microscopy. The fluorescent and magnetic properties of the sample were investigated by fluorescence spectroscopy and vibrating-sample magnetometer, respectively. The results indicate that the Fe(3)O(4)/carbon nanocomposite exhibit good photoluminescent (emission ranging from 425 to 550 nm) and strong magnetic (saturation magnetization of 44.2 emu/g) properties.     

Comparison of solution and crystal structures of preQ1 riboswitch reveals calcium-induced changes in conformation and dynamics

Riboswitches regulate gene expression via specific recognition of cognate metabolites by their aptamer domains, which fold into stable conformations upon ligand binding. However, the recently reported solution and crystal structures of the Bacillus subtilis preQ(1) riboswitch aptamer show small but significant differences, suggesting that there may be conformational heterogeneity in the ligand-bound state. We present a structural and dynamic characterization of this aptamer by solution NMR spectroscopy. The aptamer-preQ(1) complex is intrinsically flexible in solution, with two regions that undergo motions on different time scales. Three residues move in concert on the micro-to-millisecond time scale and may serve as the lid of the preQ(1)-binding pocket. Several Ca(2+) ions are present in the crystal structure, one of which binds with an affinity of 47 ± 2 μM in solution to a site that is formed only upon ligand binding. Addition of Ca(2+) to the aptamer-preQ(1) complex in solution results in conformational changes that account for the differences between the solution and crystal structures. Remarkably, the Ca(2+) ions present in the crystal structure, which were proposed to be important for folding and ligand recognition, are not required for either in solution.     

Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel

Barnacle cement (BC) was beneficially applied on stainless steel (SS) to serve as the initiator anchor for surface-initiated polymerization. The amine and hydroxyl moieties of barnacle cement reacted with 2-bromoisobutyryl bromide to provide the alkyl halide initiator for the surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA). The hydroxyl groups of HEMA polymer (PHEMA) were then converted to carboxyl groups for coupling of chitosan (CS) to impart the SS surface with both antifouling and antibacterial properties. The surface-functionalized SS reduced bovine serum albumin adsorption, bacterial adhesion, and exhibited antibacterial efficacy against Escherichia coli (E. coli). The effectiveness of barnacle cement as an initiator anchor was compared to that of dopamine, a marine mussel inspired biomimetic anchor previously used in surface-initiated polymerization. The results indicate that the barnacle cement is a stable and effective anchor for functional surface coatings and polymer brushes.     

Alveolar macrophages modulate allergic inflammation in a murine model of asthma

The role of alveolar macrophages (AMs) in the pathogenesis of asthma is still unknown. The aim of the present study was to investigate the effects of AM in the murine model of asthma. AMs were selectively depleted by liposomes containing clodronate just before allergen challenges, and changes in inflammatory cells and cytokine concentrations in bronchoalveolar lavage (BAL) fluid were measured. AMs were then adoptively transferred to AM-depleted sensitized mice and changes were measured. Phenotypic changes in AMs were evaluated after in vitro allergen stimulation. AM-depletion after sensitization significantly increased the number of eosinophils and lymphocytes and the concentrations of IL-4, IL-5 and GM-CSF in BAL fluid. These changes were significantly ameliorated only by adoptive transfer of unsensitized AMs, not by sensitized AMs. In addition, in vitro allergen stimulation of AMs resulted in their gaining the ability to produce inflammatory cytokines, such as IL-1β, IL-6 and TNF-α, and losing the ability to suppress GM-CSF concentrations in BAL fluid. These findings suggested that AMs worked probably through GM-CSF-dependent mechanisms, although further confirmatory experiments are needed. Our results indicate that the role of AMs in the context of airway inflammation should be re-examined.     

Beating cancer in multiple ways using nanogold

Gold nanoparticles possess a unique combination of properties which allow them to act as highly multifunctional anti-cancer agents (X. H. Huang, P. K. Jain, I. H. El-Sayed and M. A. El-Sayed, Nanomedicine, 2007, 2, 681-693; P. Ghosh, G. Han, M. De, C. K. Kim and V. M. Rotello, Adv. Drug Delivery Rev., 2008, 60, 1307-1315; S. Lal, S. E. Clare and N. J. Halas, Acc. Chem. Res., 2008, 41, 1842-1851; D. A. Giljohann, D. S. Seferos, W. L. Daniel, M. D. Massich, P. C. Patel and C. A. Mirkin, Angew. Chem., Int. Ed., 2010, 49, 3280-3294). Not only can they be used as targeted contrast agents for photothermal cancer therapy, they can serve as scaffolds for increasingly potent cancer drug delivery, as transfection agents for selective gene therapy, and as intrinsic antineoplastic agents. This tutorial review will highlight some of the many forms and recent applications of these gold nanoparticle conjugates by our lab and others, as well as their rational design and physiologic interactions.