Spectrophotometric measurement of uranium(VI)-tributylphosphate complex in supercritical carbon dioxide

UV-visible absorption spectra of uranium(VI)-tributylphosphate (U(VI)-TBP) complex dissolved in supercritical CO(2) at 40-60 degrees C and 100-250 kg cm(-2) were recorded. Wavelengths and molar extinction coefficients for the absorption peaks of U(VI)-TBP were determined and confirmed to be in good agreement with those of UO(2)(NO(3))(2)(TBP)(2) complex dissolved in organic solvents such as n-hexane. The absorbance at a given wavelength was proportional to the concentration of U(VI) species in supercritical CO(2), indicating a feasibility of in-situ determination of U(VI) concentration in CO(2) phase. A lower detection limit of U(VI)-TBP complex was estimated to be ca. 1x10(-3)M. The molar extinction coefficient of U(VI)-TBP in supercritical CO(2) decreased slightly with an increase of the density of CO(2) medium, suggesting that the solute-solvent interaction of U(VI)-TBP complex with CO(2) was affected by the density. On the basis of the spectra obtained, phase behavior and solubility of UO(2)(NO(3))(2)(TBP)(2)+H(NO(3))(TBP)+TBP in supercritical CO(2) were elucidated.     

Deposition of polymer latices on grafted Nylon 6 fiber

Deposition of polymer latices on a grafted Nylon 6 fiber was studied as a function of pH and the degree of grafting. The latices were polystyrene (PS), styrene/acrylamide copolymer (P(St/AAm)) and styrene/acrylic acid copolymer (P(St/AA)). The deposition of the latices on the grafted fiber decreased in every case with increasing pH and no deposition was observed at alkaline pH. The grafting of fiber with acrylic and methacrylic acid reduced the deposition of P(St/AAm) and P(St/AA) latices but had no influence on the deposition of PS latex. The relation between the deposition rates and the interaction energy at acidic pH indicates that the deposition of PS latex on the grafted fiber mainly depends on the electrostatic interaction. These results suggest that the expansion of water-soluble polyelectrolyte layer on the surface of grafted fiber plays an important role on the deposition.     

Syntheses, structures, and redox properties of dimeric triruthenium clusters bridged by bis(diphenylphosphino)acetylene and -ethylene

Reactions of oxo-centered triruthenium acetate complexes [Ru3O(OAc)6(py)2(CH3OH)](PF6) (py = pyridine, OAc = CH3COO-) (1) with nearly equimolar amounts of dppa [bis(diphenylphosphino)acetylene] or dppen [trans-1,2-bis(diphenylphosphino)ethylene] gave [Ru3O(OAc)6(py)2(L)](PF6) (L = dppa, 2; dppen, 3). With 2.4 equiv of 1, the reactions provided diphosphine-linked triruthenium dimers, [[Ru3O(OAc)6(py)2]2(L)](PF6)2 (L = dppa, 4; L = dppen, 5), respectively. Similarly, the reactions of [Ru3O(OAc)6(L')2(MeOH)]+ [L' = dmap (4-(dimethylamino)pyridine), 1a; L' = abco (1-azabicyclo[2.2.2]octane), 1b] with dppen gave dppen-linked dimers, [[Ru3O(OAc)6(dmap)2]2(dppen)](SbF6)2 (6) and [[Ru3O(OAc)6(abco)2]2(dppen)](BF4)2 (7), respectively. The chemical reduction of 2, 4, and 5 by hydrazine afforded one- or two-electron-reduced, neutral products, Ru3O(OAc)6(py)2(dppa) (2a), [Ru3O(OAc)6(py)2]2(dppa) (4a), and [Ru3O(OAc)6(py)2]2(dppen) (5a), respectively. The complexes were characterized by elemental analyses, ES-MS, UV-vis, IR, and 31P NMR spectroscopies, and cyclic and differential-pulse voltammetries. The molecular structures of compounds 2, 4, 5, 5a, 6, and 7 were determined by single-crystal X-ray diffraction. In 0.1 M (Bu4N)PF6-acetone, the monomers and dimers of triruthenium clusters show reversible and multistep redox responses. The two triruthenium cluster centers in dimers undergo stepwise reductions and oxidations due to the identical redox processes of the individual Ru3O cluster cores, suggesting the presence of electronic communications between them through the conjugated diphosphine spacer. The redox wave splitting mediated by dppa containing an ethynyl group (C triple bond C) is found to be more extensive than that by dppen containing an ethenyl (C=C) one. It appears that the redox wave splitting is enhanced by the introduction of electron-donating substituents on the auxiliary pyridine rings.     

Highly regioselective diels-alder reactions of 2-trimethylsilylmethyl- 1,3-butadiene catalyzed by a lewis acid and applications to syntheses of terpenes

2-Trimethylsilylmethyl-1,3-butadiene undergoes highly regioselective Diels-Alder reactions with dienophiles such as acrolein and methyl vinyl ketone catalyzed by aluminum chloride in which the “para” isomers are obtained almost exclusively. The adducts are converted readily to a variety of naturally occurring mono and sesquiterpenes.     

Configuration-Interaction study of lower excited states of O2: Valence and rydberg characters of the two lowest 3Σu − states

Configuration-interaction calculations, with an extended basis, are carried out on the ground and lower excited states of O₂ and O₂⁺ at and near the equilibrium internuclear distance (R = 2.3 a.u.) of the ground state of O₂. Particular attention has been paid to the two lowest ³Σ_u^? states, and the mixing of the valence and Rydberg characters in these states are studied. The lowest ³Σ_u^? state is a Rydberg-type state for R < 2.3 a.u., but becomes valence-type for R ? 2.3 a.u. The second ³Σ_u^? state, which is 1.6 eV above the lowest ³Σ_u^? at R = 2.3 a.u., changes its character from Rydberg to valence, valence to Rydberg, and then to valence again when R increases from 1.9 to 3.1 a.u. Satisfactory agreement between the calculated and experimental vertical excitation energies is obtained.     

Synthesis and properties of new polyimides containing flourinated alkoxy side chains

A series of new polyimides containing fluorinated alkoxy side chains are prepared from novel fluorinated alkoxy diamines. The dieletric constant at 1 kHz in the fluorinated polyimides decreases from 3.3 to 2.6 as fluorine content increases. The refractive index also changes from 1.58 to 1.48, dependent on the fluorine content. In addition, the fluorinated polyimides exhibit lower water absorption than the reference polyimides prepared from m-phenylenediamine.     

Complexation of metal ion with poly(1-vinylimidazole) resin prepared by radiation-induced polymerization with template metal ion

Poly(1-vinylimidazole) (PVI) resin was prepared with Ni²⁺, Co²⁺, or Zn²⁺ as a template to study the adsorption of metal ions. The metal-1-vinylimidazole complex was copolymerized and crosslinked with 1-vinyl-2-pyrrolidone by γ-ray irradiation and the template metal ion was removed by treating the polymer complex with an acid. These PVI resins adsorbed metal ions more effectively than the PVI resin prepared without the template. The number of adsorption sites (As) and the stability constant (K) of Ni²⁺ complex were larger for the PVI resin prepared with the Ni ion template, caused by the smaller dissociation rate constant of Ni ion from the resin. The composition of the Ni²⁺ complex in the resin remained constant. This suggests that the complexation proceeded via a one-step mechanism.     

Metal atom synthesis ofsyn(1-3-η-but-2-enyl)(η-buta-1,3-diene)(triethylphosphine)cobalt

Summary Cocondensation of buta-1,3-diene with cobalt vapor followed by addition of triethylphosphine gave a new complexsyn-Co(C₄H₇)(C₄H₆)(PEt₃) (1) in 43% yield. The reaction pathway leading to (1) was investigated by matrix isolation i.r. spectroscopy. The monodentate butadiene, which was found as a reaction intermediate in the –196 toca. 0° temperature range, rearranges into a -butenyl or bidentate butadiene. The reaction of (1) with bromoethane gave cycloocta-1,5-diene and 4-vinylcyclohex-1-ene in quantitative yield. Complex (1) catalyzes the cyclotrimerization of phenylacetylene to 1,3,5-triphenylbenzene.     

Spectrophotometric determination of yttrium in aluminium base alloys with 1-[(5-Methyl-2-pyridyl)azo]-2-naphthol

Summary A highly sensitive and selective Spectrophotometric method has been developed for the determination of yttrium in aluminium base alloys. The method is based on the red water-insoluble complex formed when yttrium and 1-[(5-methyl-2-pyridyl)azo]-2-naphthol (5-Me--PAN) react in a pH 9.5–11.2 solution. This complex could be extracted into ether (absorption maximum, 530 nm). Beer's law is obeyed up to 1 p. p. m. of yttrium and the molar absorptivity is 6.4 · 10⁴ l · mole^–1 · cm^–1 at 530 nm.

---

Zusammenfassung Eine hochempfindliche und selektive spektrophotometrische Methode zur Bestimmung von Yttrium in Aluminiumlegierungen wurde ausgearbeitet. Sie beruht auf der Bildung der roten, wasserlöslichen Komplexverbindung des Yttriums mit 1-[(5-Methyl-2-pyridyl)azo]-2-naphthol(5-Me--PAN) bei pH 9,5–11,2. Diese Verbindung läßt sich mit Äther extrahieren und hat ein Absorptionsmaximum bei 530 nm. Das Beersche Gesetz ist bis zu 1 ppm Yttrium erfüllt. Die molare Extinktion beträgt 6,4 · 10⁴ 1 · Mol^–1 cm^–1 bei 530 nm.

     

An efficient glycosidation method using 2,3-unsaturated glycosyl donors

A novel class of ‘armed’ glycosyl donors containing a double bond at the C-2 position was designed by mimicking the mechanism of lysozyme-initiated hydrolysis. These donors were used to achieve chemoselective glycosidation of hex-2-enopyranosyl acetate and hexopyranosyl acetate, and synthesis of O-glycosidic linkages between highly deoxygenated sugars and tertiary alcohols.