Two hydrophilic conjugated polymers, PmP‐NOH and PmP36F‐NOH, with polar diethanolamine on the side chains and main chain structures of poly(meta‐phenylene) and poly(meta‐phenylene‐alt‐3,6‐fluorene), respectively, are successfully synthesized. The films of PmP‐NOH and PmP36F‐NOH show absorption edges at 340 and 343 nm, respectively. The calculated optical bandgaps of the two polymers are 3.65 and 3.62 eV, respectively, the largest ones so far reported for hydrophilic conjugated polymers. PmP‐NOH and PmP36F‐NOH also possess deep‐lying highest occupied molecular orbital levels of −6.19 and −6.15 eV, respectively. Inserting PmP‐NOH and PmP36F‐NOH as a cathode interlayer in inverted polymer solar cells with a PTB7/PC71BM blend as the active layer, high power conversion efficiencies of 8.58% and 8.33%, respectively, are achieved, demonstrating that the two hydrophilic polymers are excellent interlayers for efficient inverted polymer solar cells.
We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection. 相似文献
Materials with hydrophilic–oleophobic properties are of relevance due to their application to different fields such as self-cleaning coatings, liquid–liquid separation membranes and functional textiles for different technical applications. In this work, hydrophilic–oleophobic coatings have been deposited on cellulosic materials (filter paper and bleached cotton) by means of plasma assisted polymerization of acrylic acid solutions in water followed by cationic fluorosurfactant complexation. Chemical composition of the coatings on cellulosic materials was characterized by means of FTIR–ATR and XPS whereas their morphology was studied by SEM. Hydrophilic–oleophobic behavior was characterized by means of contact angle and wetting time. Additionally wetting properties of cationic, anionic and non-ionic surfactant solutions on the hydrophilic–oleophobic coatings were used to characterize the polyelectrolyte electrostatic forces upon the functionalized layer. 相似文献
An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd2(dba)3]?CHCl3 and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities. 相似文献
Three dimensional Liesegang spherical layers of CaHPO4 in gelatin ball were performed by employing CaCl2 and Na2HPO4 as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca2+ and HPO42? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca2+ as the inner electrolyte, LRs were prepared. However, employing HPO42? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca2+ and –COO? of gelatin chains, which dominated the formation of CaHPO4 LRs in gelatin. 相似文献
Increasing long‐term photostability of BiVO4 photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO4 junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO4 and NiOOH/electrolyte junctions. Further, adding Fe2+ into the borate buffer electrolyte alleviates the active but unstable character of etched‐NiOOH/BiVO4, leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long‐term durability. 相似文献
A new type of catalyst for the hydrosilylation of unsaturated monomers with dichloromethylsilane (DCMS) was prepared, which consisted of thiolmethylene-substituted styrene–divinyl benzene copolymer and platinum. When using DCMS as a hydrosilylation agent, these catalysts showed a high activity in the hydrosilylation of vinyl and acetylene monomers as styrene, alkyl vinyl silanes, acetylene, phenyl acetylene, butyl acrylate. The activities of catalysts were not significantly reduced even after 20 reuse cycles. 相似文献
To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries. 相似文献