Propagation of a focused light beam in a circuital system of tunnel-coupled waveguides

The propagation of a pencil beam in a circuital system of tunnel-coupled waveguides is considered. It is shown that the beam periodically focuses into a point when moving along the trajectory. A maximal number of waveguides supporting the propagation of the beam can be estimated in simple terms. The cross-sectional area of the waveguides can be subdivided into three zone with the beam pulsing only in the central one.     

Structure of (Ba0.7Sr0.3)TiO3 films prepared by chemical solution deposition during crystallization on a sublayer

Barium strontium titanate (BST) films on Si-SiO₂-Ti-Pt substrates are prepared by chemical solution deposition upon crystallization on a sublayer. The structure of the BST films is investigated using transmission electron microscopy, high-resolution electron microscopy, and x-ray diffraction analysis.     

Nonlinear-optical and micro-Raman diagnostics of thin films and nanostructures of ABO3 ferroelectrics

Ferroelectric composite two-dimensional ferroelectric/aluminum oxide nanostructures were studied. A porous aluminum oxide matrix was used as a template into which a ferroelectric precursor was introduced, followed by annealing. The prepared nanostructures were studied using optical second harmonic generation and micro-Raman scattering.     

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.     

Fatty acid binding site of mitochondrial uncoupling protein UCP2 as probed by EPR spectroscopy of spin-labeled fatty acids

Electron paramagnetic resonance (EPR) spectroscopy of spin-labeled fatty acids was used to investigate their interaction withEscherichia coli-expressed human mitochondrial uncoupling protein UCP2 refolded from inclusion bodies in nonaethylene glycol monododecyl ether (C₁₂E₉) micelles. 5-DOXYL-stearic acid and 4-PROXYL-palmitic acid bound to UCP2 exhibited additional clearly separated h_+1I, h_?1I “immobile” peaks in the low- and high-field region, respectively, separated by 42 and 44 Gauss, and extensively reduced h_+1M, h_?1M “mobile” peaks, separated by about 30 G, whereas with 7-DOXYL-stearic acid the I and M peaks were smoothed together into one wide peak. Competition of 4-PROXYL-palmitic acid with added palmitic acid, arachidonic acid, and all-cis-8,11,14-eicosatrienoic acid and of 7-DOXYL-stearic acid with arachidonic acid was indicated by the disappearance of the h_+1I, h_?1I “immobile” peaks, whereas redistribution in micelles without protein was indicated by the rising of the h_+1M, h_?1M “mobile” peaks. In conclusion, a competition of palmitic, arachidonic, and eicosatrienoic acid within a putative fatty acid binding site was observed for mitochondrial uncoupling protein UCP2. This finding together with the observation of EPR spectra of highly immobilized probes exclusively in the presence of the recombinant UCP2 suggest the existence of a fatty acid binding site on UCP2 which is a prerequisite of the fatty acid cycling mechanism as previously postulated for UCP1.     

Efficient multi and single line atomic fluorine lasers

Intense multi- and single-line laser operation is reported from semiconductively preionised atomic fluorine lasers employing an optimised capacitor transfer excitation circuitry. The performance and spectral characteristics of these lasers are discussed and compared to the characteristics of previously described atomic fluorine lasers. The efficiency of one of these lasers described, at optimum conditions, is reaching a value as high as 0.14%. To the best of our knowledge, this is the highest efficiency reported up date, for an atomic fluorine laser.     

Preparation of MgB<Subscript>2</Subscript>/Fe superconductor wire by electrical self-heating

MgB₂/Fe wires were prepared by electrical self-heating of in situ powder-in-tube wires for the first time at ambient conditions. Characterization of the wires processed at 750 °C, 800 °C and 850 °C for 15 min by XRD, SEM, ϱ–T, susceptibility and J_C measurements shows that the MgB₂ formed is of high quality particularly with respect to phase purity and transport J_C. The method considerably reduces the overall energy consumption vis-à-vis the production cost, simplifies the complexity of the fabrication procedure and is promising for manufacture of high-quality MgB₂ superconducting wires. PACS 74.70.Ad; 74.62.Bf; 74.25.Fy; 74.25.Ha; 81.20.Hy     

Long-wavelength GaInAsSb/AlGaAsSb DFB lasers emitting near 2.6 μm

We have successfully fabricated and characterized room temperature continuous wave (cw) GaInAsSb/AlGaAsSb distributed feedback lasers emitting in the wavelength region between 2.499 and 2.573 μm. To the best of our knowledge, this is the longest emission wavelength realized with a GaSb-based DFB laser diode. The laser structure used for DFB processing was grown by solid source molecular beam epitaxy. A DFB concept requiring no subsequent overgrowth step was used by defining first-order Cr-Bragg gratings laterally patterned to a ridge waveguide. Threshold currents smaller than 60 mA and room temperature cw output powers up to 6.5 mW were obtained. The laser diodes show single mode emission with side mode suppression ratios (SMSR) of up to 32 dB.     

Some observations on uncertainty propagation through a simple nonlinear system

This paper discusses a number of issues relating to the analysis of uncertain systems or data in the context of (low-frequency) structural dynamics. In order to illustrate potential problems in applying ‘classical’ uncertainty analysis methods to nonlinear systems, a simple nonlinear system is simulated and the breakdown of two standard approaches is demonstrated on data from the system. By relaxing the requirements of the analysis, it is shown that an alternative uncertainty theory gives useful qualitative information about the system. This motivates a discussion of how uncertainty frameworks should be chosen to suit the problem in hand and leads to a clustering of uncertainty problems in structural dynamics into three types: quantification, fusion and propagation.