Nanoimprint lithography is an economical and convenient method for manufacturing nanostructures, which has developed very quickly and has been widely used in the nanoindustry. However, during the process of nanoimprinting, mechanical instabilities of soft nanostructures could lead to buckling. In order to study the mechanism of this problem, we analyze the buckling of one vertical elastic column under its own weight. Based on the comparison between two critical heights of different substrates (rigid and elastic), we conclude that the approximation of considering the substrate as rigid is acceptable. Furthermore the interaction between columns with the deformation of a substrate could lead to collective buckling. Our theoretical calculations show that whether the columns are elastic or rigid makes little difference for the buckling modes. 相似文献
We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N?=?3).
Figure
Molecularly imprinted polymers (MIPs) and nanomaterials were combined to prepare a novel macroporous structured MIPs based electrochemical sensor for the investigation of an environmental pollutant, p-nitrophenol (p-NPh). The sensor exhibited a fast binding dynamics, good specific adsorption capacities, and high selective recognition to p-NPh. 相似文献
We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N = 3).
This paper presents a Monte Carlo code to get response spectrum of ions for the Neutron Depth Profiling (NDP) technique called Monte Carlo NDP (MC-NDP) that simulates the behavior of ions transmitted through a sample matrix and generates the energy spectrum for a specified detector. The MC-NDP model is based on the Ziegler–Biersack–Littmark Model, but incorporates the advantages of TRIM and CORTEO. The Impulse Approximation method is used to determine the flight length with the indexical interpolation method rather than the Magic algorithm for the scattering angle between ions and nucleus. This makes MC-NDP more efficient and convenient to simulate entire ion histories by a Monte Carlo approach. MC-NDP’s results agree well with both TRIM results and the experimental data. 相似文献
Two hydrophilic conjugated polymers, PmP‐NOH and PmP36F‐NOH, with polar diethanolamine on the side chains and main chain structures of poly(meta‐phenylene) and poly(meta‐phenylene‐alt‐3,6‐fluorene), respectively, are successfully synthesized. The films of PmP‐NOH and PmP36F‐NOH show absorption edges at 340 and 343 nm, respectively. The calculated optical bandgaps of the two polymers are 3.65 and 3.62 eV, respectively, the largest ones so far reported for hydrophilic conjugated polymers. PmP‐NOH and PmP36F‐NOH also possess deep‐lying highest occupied molecular orbital levels of −6.19 and −6.15 eV, respectively. Inserting PmP‐NOH and PmP36F‐NOH as a cathode interlayer in inverted polymer solar cells with a PTB7/PC71BM blend as the active layer, high power conversion efficiencies of 8.58% and 8.33%, respectively, are achieved, demonstrating that the two hydrophilic polymers are excellent interlayers for efficient inverted polymer solar cells.
We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection. 相似文献
Materials with hydrophilic–oleophobic properties are of relevance due to their application to different fields such as self-cleaning coatings, liquid–liquid separation membranes and functional textiles for different technical applications. In this work, hydrophilic–oleophobic coatings have been deposited on cellulosic materials (filter paper and bleached cotton) by means of plasma assisted polymerization of acrylic acid solutions in water followed by cationic fluorosurfactant complexation. Chemical composition of the coatings on cellulosic materials was characterized by means of FTIR–ATR and XPS whereas their morphology was studied by SEM. Hydrophilic–oleophobic behavior was characterized by means of contact angle and wetting time. Additionally wetting properties of cationic, anionic and non-ionic surfactant solutions on the hydrophilic–oleophobic coatings were used to characterize the polyelectrolyte electrostatic forces upon the functionalized layer. 相似文献
An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd2(dba)3]?CHCl3 and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities. 相似文献