The Caputo–Fabrizio time-fractional Sharma–Tasso–Olver–Burgers equation and its valid approximations

Studying the dynamics of solitons in nonlinear time-fractional partial differential equations has received substantial attention, in the last decades. The main aim of the current investigation is to consider the time-fractional Sharma–Tasso–Olver–Burgers (STOB) equation in the Caputo–Fabrizio (CF) context and obtain its valid approximations through adopting a mixed approach composed of the homotopy analysis method (HAM) and the Laplace transform. The existence and uniqueness of the solution of the time-fractional STOB equation in the CF context are investigated by demonstrating the Lipschitz condition for $\varphi \left(x,t;u\right)$ as the kernel and giving some theorems. To illustrate the CF operator effect on the dynamics of the obtained solitons, several two- and three-dimensional plots are formally considered. It is shown that the mixed approach is capable of producing valid approximations to the time-fractional STOB equation in the CF context.     

Fluorometric determination of paraoxon in human serum using a gold nanoparticle-immobilized organophosphorus hydrolase and coumarin 1 as a competitive inhibitor

A dimeric organophosphorus hydrolase (OPH; EC 3.1.8.1; 72 kDa) was isolated from wild-type bacteria, analyzed for its 16s rRNA sequence, purified, and immobilized on gold nanoparticles (AuNPs) to form the transducer part of a biosensor. The isolated strain was identified as Pseudomonas aeruginosa. The AuNPs were characterized by transmission electron microscopy and localized surface plasmon resonance. Covalent binding of OPH to the AuNPs was confirmed by spectrophotometry, enzymatic activity assays, and FTIR spectroscopy. Coumarin 1, a competitive inhibitor of OPH, was used as a fluorogenic probe. The bioconjugates quench the emission of coumarin 1 upon binding, but the addition of paraoxon results in an enhancement of fluorescence that is directly proportional to the concentration of paraoxon. The gold-OPH conjugates were then used to determine paraoxon in serum samples spiked with varying levels of paraoxon. The method works in the 50 to 1,050 nM concentration range, has a low standard deviation (with a CV of 5.7–11 %), and a detection limit as low as 5?×?10^?11 M.

Synthesis of silver nanoparticles via green method using ultrasound irradiation in seaweed <Emphasis Type="Italic">Kappaphycus alvarezii</Emphasis> media

Green methods are a safer alternative to natural chemical and physical methods for the synthesis of silver nanoparticles (Ag-NPs), due to their being environmentally friendly and cost effective. This study offers a new green approach using ultrasound irradiation as the reducing agent and seaweed Kappaphycus alvarezii (K. alvarezii) as the natural bio-media. The seaweed K. alvarezii/Ag-NPs was characterised by ultraviolet–visible (UV–vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope with energy dispersive X-ray (FESEM-EDX), zeta potential, and Fourier transform infrared (FTIR) studies. UV–vis shows that surface plasmon resonance (SPR) arises from this solution due to the combined oscillations from the nanoparticles. The XRD study indicates the crystalline nature of the Ag-NPs. From the TEM images, the Ag-NPs are almost spherical with an average diameter of 11.78 nm. The FTIR spectrum provides adequate evidence of phytochemicals stabilising the nanoparticles. Synthesised Ag-NPs were successfully obtained using this green method.     

Antibacterial effect of silver nanoparticles prepared in bipolymers at moderate temperature

The purpose of this study was to investigate the antibacterial effect of silver nanoparticles in chitosan–poly(ethylene glycol) suspension. The silver nanoparticles (AgNPs) were prepared by use of an environmentally benign method from chitosan (Cts) and poly(ethylene glycol) (PEG) at moderate temperature and with stirring for different times. Silver nitrate (AgNO₃) was used as the metal precursor and Cts and PEG were used as solid support and polymeric stabilizer, respectively. The antibacterial activity of silver–chitosan–poly(ethylene glycol) nanocomposites (Ag–Cts–PEG NCs) against Staphylococcus aureus, Micrococcus luteum, Pseudomonas aeruginosa, and Escherichia coli was tested by use of the Mueller–Hinton agar disk-diffusion method. Formation of AgNPs was determined by UV–visible spectroscopy; surface plasmon absorption maxima were observed at 415–430 nm in the UV–visible spectrum. The peaks in the XRD pattern confirmed that the AgNPs had a face-centered cubic structure; peaks of contaminated crystalline phases were not observed. Transmission electron microscopy (TEM) revealed that the AgNPs synthesized were spherical. The optimum stirring time for synthesis of the smallest particle size (mean diameter 5.50 nm) was 12 h. The AgNPs in Cts–PEG were effective against all the bacteria tested. Higher antibacterial activity was observed for AgNPs with smaller size. These results suggest that AgNPs can be used as an effective inhibitor of bacteria and can be used in medical applications. These results also suggest that AgNPs were successfully synthesized in Cts–PEG suspension at moderate temperature with different stirring times.     

Determination of Flavonoid Markers in Honey with SPE and LC using Experimental Design

Determination of flavonoid markers quercetin, hesperetin, and chrysin, found in north Iranian citrus honey samples, was carried out by solid phase extraction (SPE) and isocratic liquid chromatographic separation using central composite design. Optimum conditions for SPE were achieved using 10 mL methanol/water (13:87, v/v, pH = 7) as the washing solvent and 4 mL methanol for elution. Good clean-up and high recovery >90% were observed for all analytes. The use of water/ACN/THF/AcOH (54:36:5:5, v/v) was found to serve as the optimum mobile phase composition and allowed for the separation of analytes from endogenous compounds present in honey. SPE parameters, such as maximum loading capacity and breakthrough volume, were also determined for each analyte. Limit of detection, linear range, recovery, repeatability of retention times, and peak heights were 3.11 × 10^?8–4.44 × 10^?8 g g^?1, 0.50–50.0 μg mL^?1 (R ² > 0.99), 90.7–96.9%, 3.0–3.6%, and 1.0–2.6%, respectively. Precision of the overall analytical procedure, estimated by five replicate measurements for quercetin, hesperetin and chrysin in citrus honey, as well as the relative standard deviations were 4.3%, 3.8%, and 5.5%, respectively.     

The Antifungal Activity of <Emphasis Type="Italic">Sarcococca saligna</Emphasis> Ethanol Extract and its Combination Effect with Fluconazole against Different Resistant Aspergillus Species

Microbial resistance is a major drawback in chemotherapy of microbial or fungal infection disease. In this study, the antifungal activity of ethanol extract of a selected plant (Sarcococca saligna) has been investigated against clinical isolates of Aspergillus niger, Aspergillus treus, Aspergillus flavus, and Aspergillus fumigatus. Also, the enhancement of the antifungal activity of fluconazole by this extract was further evaluated against mentioned test strains. Conventional disk diffusion method was used to assay the antifungal activity of S. saligna ethanol extract in the absence and presence of fluconazole. The highest antifungal activity was observed against A. treus. The ethanol extract of S. saligna enhanced the antifungal activity of fluconazole against A. niger and A. treus and A. flavus. At the highest tested contents (4 mg/disk), 1.15-, 0.64-, and 2.47-fold increases in inhibition zone surface area were observed for A. niger, A. treus, and A. flavus, respectively. However, no enhancing effect was observed for this plant extract against Aspergillus fumigates at tested contents (0.5, 1, 2, 3, and 4 mg/disk). In a separate experiment, the general cytotoxicity of the ethanol extract of S. saligna was examined with brine shrimp assay. This plant extract showed low cytotoxicity against Artemia salina (LC₅₀ = 186 μg/ml).     

Green synthesis of Fe3O4 nanoparticles for hyperthermia,magnetic resonance imaging and 5-fluorouracil carrier in potential colorectal cancer treatment

Research on Chemical Intermediates - Magnetite nanoparticles (Fe3O4 NPs) have received considerable attention in various biomedical applications due to their fascinating properties and multiple...     

Transformation of Single-Use Plastics into Lighter Hydrocarbons via an Economical Coal Fly Ash based Zeolite Catalyst

A mixture of zeolite X and A, derived from coal fly ash (CFA), was protonated and utilized as an acid catalyst to decompose single-use plastics (SUP) waste into lighter hydrocarbons. Low-density polyethylene (LDPE) was selected as the source of SUP, and this study aimed to investigate the catalytic effects of the protonated CFA-derived zeolite (H-XA) as an economical option on the LDPE pyrolysis temperature and output. CFA converted into H-XA through the conventional alkali fusion, followed by sonication and simplified hydrothermal and protonation processes. The impact of the alkali agent ratio on the resulting product was investigated, and outcomes were evaluated. The product with optimum properties was then selected for investigation in the LDPE pyrolysis studies. Finally, the results were compared with commercial Protonated Zeolite Socony Mobil-5 (H-ZSM5) and thermal decomposition without catalysts. Regarding LDPE degradation temperature, H-XA could lower that by 97 °C compared to thermal degradation, which was almost the same as commercial H-ZSM5 with 110 °C. The pyrograms obtained through the Pyrolysis-gas chromatography-mass spectrometry (Py-GCMS) analysis indicated the elimination of heavier hydrocarbons in the presence of H-XA and the product spectra laid in the range of C3 to C9, which was entirely different from the LDPE with hydrocarbons of varying lengths. Moreover, kinetic studies on the LDPE decomposition reactions in this work have revealed that LDPE conversion occurs at a lower activation energy level in the presence of H-XA, which is comparable to the energy level observed when H-ZSM5 is used as the catalyst. The synthesis of H-XA with desirable catalytic activity, such as the ability to lower the LDPE degradation temperature and make lighter hydrocarbons as the pyrolysis output, suggests the great potential of the CFA-based acid catalyst for use in SUP recycling. This represent a game of waste versus waste within the framework of the circular economy, where the environment is the ultimate winner.     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Response surface methodology and support vector machine for the optimization of separation in linear gradient elution

Experimental design methodology was used to optimize the linear gradient elution chromatography. The effect of initial mobile phase composition (φ_in), initial isocratic time (t_in), and gradient time (t_G) on the retention times of phenyl thiohydantoin aminoacids (PTH‐amino acids) was investigated. The experiments were performed according to Box–Behnken experimental design to map the chromatographic response surface. Then multiple linear regression and support vector machine (SVM) methods were used to fit the retention times of solutes. Results shows the SVM models have better ability to predict retention time and used for grid search in factor space. The SVM models were verified, as good agreement was observed between the predicted and experimental values of retention time in the optimal condition.