Density functional theory investigation of novel Eu(III) complexes with asymmetric bis(phosphine) oxides

Recently, we have developed novel Eu(III) complexes with three beta-diketonates and one asymmetric bis(phosphine) oxide whose light emission intensity is drastically increased. In this paper, one of these complexes is investigated by the density functional theory calculation. Sixteen isomers of this complex have been considered. The ratio of the existence for the most stable isomer (B1_1a) is found to be about 51%, and the sum of the ratio of the existence for the six most stable isomers (B1_1a, B1_3a, B1_8a, B1_2a, B1_1b, and B1_5a) is about 100%, assuming the Boltzmann distribution (T = 300 K). The coordination structures of the six most stable isomers in the ground states are similar, and we can expect asymmetric ligand fields for them, favorable for the efficient light emission. Vertical excitation energies and oscillator strengths for each isomer have been obtained by the time-dependent density functional theory. With the red-shift of the wavelength and the interpolation by Gaussian convolution, both the calculated absorption spectra for the most stable isomer B1_1a and the calculated absorption spectra for the ensemble average of the isomers are found to be similar to the experimental fluorescence excitation spectra. The efficiency of energy transfer from the triplet excited state to the Eu(III) ion is considered by calculating DeltaEET (difference between the adiabatic excitation energy of the complex for the lowest triplet state and the emission energy of the Eu(III) ion for 5D0 to 7F2). The characters for the lowest triplet states for the isomers are investigated by the spin density distributions of the triplet states.     

Infrared spectroscopy of ozone-water complex in a neon matrix

Matrix isolation infrared spectroscopy has been applied to study an ozone-water complex of atmospheric interest. The complex was identified in the spectral region of three normal modes of ozone and water. Ab initio calculation at MP4(SDQ), QCISD, and CCSD(T) levels indicates the existence of only one stable conformer, which accords with the present experimental result. This conformer belongs to the Cs symmetry group where two molecular planes of ozone and water are perpendicular to the Cs symmetry plane. The binding energy was calculated to be 1.89 kcal/mol at the CCSD(T)/6-311++G(3df,3pd)//CCSD(T)/6-311++G(d,p) level of theory. The formation constant and atmospheric abundance of the ozone-water complex are estimated using the thermodynamic and spectroscopic data obtained.     

Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 相似文献   

Pictet-Spengler reactions catalyzed by Brønsted acid-surfactant-combined catalyst in water or aqueous media

Perfluorooctanesulfonic acid (PFOSA), Brønsted acid-surfactant-combined catalyst, efficiently catalyzes the Pictet-Spengler reactions of β-arylethyl carbamate derivatives with aldehydes in water. The present reaction is accelerated by the addition of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP).     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXIII. Particle size control of poly(ethylene glycol)-coated polystyrene nanoparticles prepared by macromonomer method

Monodisperse polymeric nanospheres, which consist of polystyrene cores and poly(ethylene glycol) (PEG) branches on their surfaces, were prepared by the dispersion copolymerization of styrene (St) with PEG macromonomers that had a methacryloyl (MMA-PEG) or p-vinylbenzyl (St-PEG) end group in various organic solvent/water media. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces indicated that PEG macromonomer chains were favorably located on their surfaces. The morphologies of the nanospheres were observed via a scanning electron micrograph (SEM), and particle sizes were estimated by a submicron particle analyzer. When both the concentration of macromonomers and molecular weight were higher, small nanospheres in diameter were obtained. Larger nanospheres in diameter were obtained using macromonomers with low molecular weight at lower concentration. The functions that correlate the diameter (D_n) on different concentration units were D_n = K[St]^0.64[MMA-PEG]^{−0.53±0.01}[I]^−0.49 and D_n = K[St]^0.80[St-PEG]^{−0.69±0.01}[I]^−0.22, where [I], [St], [MMA-PEG], and [St-PEG] are initiator, styrene, MMA-PEG, and St-PEG macromonomer concentration in feed, respectively. When the reaction parameters such as the molecular weight of the macromonomers were properly chosen, the particle size could be controlled in a range from ca. 80 to 3100 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2155–2166, 1999     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

Development of silicon nitride fiber from Si-containing polymer by radiation curing and its application

A silicon nitride fiber (Si₃N₄) was synthesized from polycarbosilane (PCS) fiber by radiation application. PCS fibers were cured by electron beam (EB) irradiation in a helium gas atmosphere prior to the pyrolysis. The cured PCS fiber was converted to Si₃N₄ ceramic fiber with flexibility by nitridation in ammonia gas at a high temperature of 500–1000°C. The obtained Si₃N₄ fibre showed a high heat resistance up to 1300°C, a high tensile strength of 2 GPa and excellent electrical resistivity of 10¹³ Ω cm. The ceramic fiber was fabricated to cloth and applied for electric wire insulator. The wire cable is flexible and can be applied at a high temperature atmosphere of around 1000°C.