Discovery of Potential,Dual-Active Histamine H3 Receptor Ligands with Combined Antioxidant Properties

In an attempt to find new dual acting histamine H₃ receptor (H₃R) ligands, we designed a series of compounds, structurally based on previously described in our group, a highly active and selective human histamine H₃ receptor (hH₃R) ligand KSK63. As a result, 15 obtained compounds show moderate hH₃R affinity, the best being the compound 17 (hH₃R K_i = 518 nM). Docking to the histamine H₃R homology model revealed two possible binding modes, with key interactions retained in both cases. In an attempt to find possible dual acting ligands, selected compounds were tested for antioxidant properties. Compound 16 (hH₃R K_i = 592 nM) showed the strongest antioxidant properties at the concentration of 10⁻⁴ mol/L. It significantly reduced the amount of free radicals presenting 50–60% of ascorbic acid activity in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, as well as showed antioxidative properties in the ferric reducing antioxidant power (FRAP) assay. Despite the yet unknown antioxidation mechanism and moderate hH₃R affinity, 16 (QD13) constitutes a starting point for the search of potential dual acting H₃R ligands-promising tools for the treatment of neurological disorders associated with increased neuronal oxidative stress.     

New heterocyclic metallomesogens: synthesis,mesomorphic and thermal behaviours of Cu(II) complexes with 1,2,3-triazole-based Schiff bases ligands

Two series of new Cu(II) complexes derived from the reaction of copper acetate with the non-linear 1,2,3-triazole-based Schiff bases have successfully been synthesised. The structures of the ligands and its complexes were elucidated by elemental analysis, FT-IR, ¹H-NMR and UV–visible spectroscopic techniques. The differential scanning calorimetry and polarizing optical microscopy supported the anisotropic properties of uncoordinated ligands in which the focal conic fan-shaped texture and/or broken fan-shaped texture characteristics of respective SmA and SmC phases were recorded. However, not all of their corresponding Cu(II) complexes are mesogenic. Although the iodo-substituted ligands with even parity C₁₀H₂₉ to C₁₄H₃₃ are non-stable and exhibit SmA phase which is not reproducible, the ultimate Cu(II) complexes show exclusively stable SmA phase. This observation can be ascribed to the enhanced colinearity and molecular anisotropic by the presence of Cu-N and Cu-O coordination modes. On the other hand, the comparison studies show that different positions of ortho-hydroxyl group affect the mesomorphic and thermal behaviour of ligands and Cu(II) complexes.     

Protein structure prediction using a combination of sequence homology and global energy minimization: II. Energy functions

A protein energy surface is constructed. Validation is through applications of global energy minimization to surface loops of protein crystal structures. For 9 of 10 predictions, the native backbone conformation is identified correctly. Electrostatic energy is modeled as a pairwise sum of interactions between anisotropic atomic charge densities. Model repulsion energy has a softness similar to that seen in ab initio data. Intrinsic torsional energy is modeled as a sum over pairs of adjacent torsion angles of 2-dimensional Fourier series. Hydrophobic energy is that of a hydration shell model. The remainder of hydration free energy is obtained as the energetic effect of a continuous dielectric medium. Parameters are adjusted to reproduce the following data: a complete set of ab initio energy surfaces, meaning one for each pair of adjacent torsion angles of each blocked amino acid; experimental crystal structures and sublimation energies for nine model compounds; ab initio energies over 1014 conformations of 15 small-molecule dimers; and experimental hydration free energies for 48 model compounds. All ab initio data is at the Hartree–Fock/6–31G* level. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 548–573, 1998     

Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

A new continuous method for the determination of formaldehyde in air is described. A cylindrical wet effluent diffusion denuder is used for the collection of formaldehyde from air into a thin film of absorption liquid (distilled-deionized water). Formaldehyde in the denuder concentrate is on-line detected employing a chemiluminescence flow method based on a reaction of formaldehyde and gallic acid with hydrogen peroxide in an alkaline solution. The collection efficiency of formaldehyde is quantitative at the air flow rate of 0.5 L min⁻¹ (absorption liquid flow rate of 336 μL min⁻¹). The limit of detection (S/N = 3) is 0.60 μg m⁻³ HCHO (0.49 ppb). The calibration graph is linear up to 300 μg m⁻³ HCHO (244 ppb). The relative standard deviations of chemiluminescence method for 1 × 10⁻⁶ and 5 × 10⁻⁶ M HCHO are 2.87% and 1.49%, respectively. Acetaldehyde interferes negligible, other compounds do not interfere. The method was employed for formaldehyde measurement in ambient air. The comparison measurement illustrates the good agreement of results obtained by proposed method with those obtained by reference fluorimetric method.     

Magnetic mixed matrix membranes in air separation

Ethylcellulose (EC) or linear polyimide (LPI) and magnetic neodymium powder particles MQP-14-12 were used for the preparation of inorganic-organic hybrid membranes. For all the membranes, N₂, O₂ and air permeability were examined. Mass transport coefficients were determined using the Time Lag System based on dynamic experiments in a constant pressure system. The results showed that the membrane permeation properties were improved by the addition of magnetic neodymium particles to the polymer matrix. The magnetic ethylcellulose and polyimide membranes exhibited higher gas permeability and diffusivity, while their permeability selectivity and solubility were either unchanged or slightly increased. Polyimide mixed matrix membranes were characterised by a higher thermal and mechanical stability, larger filler loading, better magnetic properties and reasonable selectivity in the air separation.     

The preparation and properties of “porous silicon–nickel ferrite” nanoheterocomposites for gas detectors

This paper discusses the preparation and properties of gas detectors based on “porous silicon–nickel ferrite” nanocomposites. Impedance spectroscopy was used to measure sensitivity to ethanol and isopropanol vapours in the presence of an alternating electric field. The results were interpreted with the help of an equivalent electrical circuit. In the analysis of the resistive–capacitive properties in the equivalent circuit a constant phase element was used.     

Minimizing Side Product Formation in Alkyne Functionalization of Ruthenium Complexes by Introduction of Protecting Groups

The synthesis of alkyne functionalized bipyridine ruthenium complexes are reported. The improved synthetic approach through application of stable protecting groups prevents formation of possible side products while facilitating purification. By applying copper-catalysed azide-alkyne cycloaddition reactions (CuAAC) pyrene units with flexible alkyl linkers are introduced at the periphery of the complex, opening up various applications including surface immobilization and DNA intercalation. All complexes are characterized structurally as well as photophysically, especially regarding the influence of the introduced alkyne and triazolyl substituents on their photophysical behavior.     

A spectrophotometric method for plant pigments determination and herbs classification

Twenty herbs, showing medicinal benefits on human life, like Taraxacum officinale, Plantago lanceolata, Hypericum perforatum, Ocimum basilicum, Melissa officinalis, Mentha piperita, and others, were tested. The percentage content of pigments, i.e. chlorophylls, carotenoids, and flavonoids, in the chosen herbs was determined. The spectrophotometric method, which is quick and readily available, was used. Measurements required pigment extraction with a solvent. Ethanol was used for the determination of chlorophylls and carotenoids, and acetone for the determination of flavonoids. Hierarchical agglomerative cluster analysis was performed in order to confirm the experimental results. The study of flavonoids content showed an interesting regularity which can be used for the classification of herbs. Plants belonging to the Lamiaceae family showed the flavonoids content in the range from 0.18 % to 0.68 %, whereas those belonging to the Apiaceaehas family showed the flavonoids content in the 0.75–1.20 % range.     

Eco‐friendly HClO4–SiO2 catalyzed synthesis of mono‐ and bis‐diaryl‐2h‐1,4 benzothiazines

Mono‐ and bis‐diaryl‐2H‐1,4‐benzothiazines were obtained in quantitative yields through silica‐supported perchloric acid catalyzed reaction cascade of double condensation and 1,4 addition of diaroylacetylenes with 2‐aminothiophenol at room temperature. The structures were confirmed by spectroscopic analyses and X‐ray crystallographic studies. J. Heterocyclic Chem., (2011)     

Hydrolysis of carboxylate and phosphate esters using monopyridinium oximes in cationic micellar media

The reactions of p‐nitrophenyl acetate (PNPA) with a series of monopyridinium oximes, viz. 2‐PAM (2‐hydroxyiminomethyl‐1‐methylpyridinium iodide), 3‐PAM (3‐hydroxyiminomethyl‐1‐methylpyridinium iodide), and 4‐PAM (4‐hydroxyiminomethyl‐1‐methylpyridinium iodide) have been studied in the presence of cationic surfactants of same hydrophobic chain length (C₁₆) within the concentration range of 0.5–6.0 mM at pH 8.0 under the pseudo‐first‐order condition. The observed rate constant (k_obs) increases with increasing surfactant concentration culminating into a maximum, and this has been analyzed in detail following the concepts of micellar catalysis. The structure–activity relationship of the investigated oximes has been discussed, and 2‐PAM was found to be the most reactive among all the three investigated oximes for the cleavage of PNPA. Esterolytic decomposition of p‐nitrophenyldiphenyl phosphate with oximate ions (? CH?NO^?) was followed in cetyltrimethylammonium bromide micelles at pH 9.0, and 4‐PAM was the most reactive oxime for the micellar hydrolysis of phosphate ester. The apparent acid dissociation constants (pK_a) of the investigated oximes have been determined spectrophotometrically. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 569–578, 2011