Asymmetric deformation of bubble shape: cause or effect of vortex-shedding?

Two perpendicular projections of rising bubbles were observed in counter-current downstream diverging flow. Evidently, the bubbles did not enter the boundary layer at the channel wall and a plug liquid flow assumption was acceptable in our experimental equipment. This confirmed that the experiment was appropriate for simulation of bubble rises in a quiescent liquid column. Recent data obtained by a high-speed camera permitted recording over a period of 60 s. Image analysis by a tailor-made program provided a time-series of quantities related to the position, size, and shape of bubbles. In addition to determination of the aspect ratio of the equivalent oblate ellipsoid, deviation from this shape was investigated in respect of the difference between the bubble’s centre of mass and the geometrical centre of bubble projection. Autocorrelation of the data indicated that the bubble inclination oscillated harmonically with a frequency of 5–10 Hz; cross correlation showed that the horizontal shift of the centre of mass, as well as the horizontal velocity, increased with increasing bubble inclination, and the vertical shift of the centre of mass increased with an increases in the absolute value of the bubble inclination. There is no significant phase shift in the oscillation of these quantities. The bulky bottom side of the bubbles is in accordance with the model of bubble oscillation induced by instability of the equilibrium of gravity and surface tension forces. The oscillation frequency dependence on surface forces (Eötvös number) is evident, while viscosity does not play a significant role in low-viscosity liquids. Therefore, vortex-shedding is more likely to be an effect of the oscillation and not its cause.     

Magnetic mixed matrix membranes in air separation

Ethylcellulose (EC) or linear polyimide (LPI) and magnetic neodymium powder particles MQP-14-12 were used for the preparation of inorganic-organic hybrid membranes. For all the membranes, N₂, O₂ and air permeability were examined. Mass transport coefficients were determined using the Time Lag System based on dynamic experiments in a constant pressure system. The results showed that the membrane permeation properties were improved by the addition of magnetic neodymium particles to the polymer matrix. The magnetic ethylcellulose and polyimide membranes exhibited higher gas permeability and diffusivity, while their permeability selectivity and solubility were either unchanged or slightly increased. Polyimide mixed matrix membranes were characterised by a higher thermal and mechanical stability, larger filler loading, better magnetic properties and reasonable selectivity in the air separation.     

A spectrophotometric method for plant pigments determination and herbs classification

Twenty herbs, showing medicinal benefits on human life, like Taraxacum officinale, Plantago lanceolata, Hypericum perforatum, Ocimum basilicum, Melissa officinalis, Mentha piperita, and others, were tested. The percentage content of pigments, i.e. chlorophylls, carotenoids, and flavonoids, in the chosen herbs was determined. The spectrophotometric method, which is quick and readily available, was used. Measurements required pigment extraction with a solvent. Ethanol was used for the determination of chlorophylls and carotenoids, and acetone for the determination of flavonoids. Hierarchical agglomerative cluster analysis was performed in order to confirm the experimental results. The study of flavonoids content showed an interesting regularity which can be used for the classification of herbs. Plants belonging to the Lamiaceae family showed the flavonoids content in the range from 0.18 % to 0.68 %, whereas those belonging to the Apiaceaehas family showed the flavonoids content in the 0.75–1.20 % range.     

Covalent Adaptable Networks with Tunable Exchange Rates Based on Reversible Thiol–yne Cross‐Linking

The design of covalent adaptable networks (CANs) relies on the ability to trigger the rearrangement of bonds within a polymer network. Simple activated alkynes are now used as versatile reversible cross‐linkers for thiols. The click‐like thiol–yne cross‐linking reaction readily enables network synthesis from polythiols through a double Michael addition with a reversible and tunable second addition step. The resulting thioacetal cross‐linking moieties are robust but dynamic linkages. A series of different activated alkynes have been synthesized and systematically probed for their ability to produce dynamic thioacetal linkages, both in kinetic studies of small molecule models, as well as in stress relaxation and creep measurements on thiol–yne‐based CANs. The results are further rationalized by DFT calculations, showing that the bond exchange rates can be significantly influenced by the choice of the activated alkyne cross‐linker.     

Copper and Zinc as Potential Biomarkers of Mood Disorders and Pandemic Syndrome

The diagnosis of affective disorders has been the subject of constant research by clinicians from all over the world for many years. Making an appropriate diagnosis among patients suffering from mood disorders is sometimes problematic due to the personality-changing nature of patients and the similarity in the clinical picture of episodes in affective disorders. For this reason, there is a need to develop rapid and effective methods of determining biological markers that differentiate these diseases. The research was carried out with blood taken from 15 patients and 15 volunteers. The analysis of biological material for trace concentrations of zinc and copper was carried out with the use of ultrasensitive triple-quadrupole inductively coupled plasma mass spectrometry (TQ ICP-MS). The obtained results prove that the concentration of copper in the test group was lower than in the control group. For the zinc concentrations, the inverse relationship was observed. The group of patients was characterized by a higher concentration of this element than the group of healthy volunteers. Summarizing the obtained results and comparing them with the results of studies by other authors, it was found that zinc and copper may be potential biomarkers of affective disorders and pandemic syndrome.     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Fluorescence properties of some 2-(4-amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones

2-(4-Amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones have been studied to evaluate their fluorescence properties and possible use as molecular fluorescent probes. The amino group was substituted with various alkyl moieties possessing a suitable terminal functional group (such as hydroxy or amino group) that could serve to bind a 3-hydroxyquinolin-4(1H)-one (3HQ) fluorescence label to a biomolecule. Besides simple hydrocarbon chains, ligands containing ethylenoxy units as optimal spacers were also tested. The structure-fluorescence properties and theoretical applicability of the studied molecules are discussed.     

Hydrolysis of carboxylate and phosphate esters using monopyridinium oximes in cationic micellar media

The reactions of p‐nitrophenyl acetate (PNPA) with a series of monopyridinium oximes, viz. 2‐PAM (2‐hydroxyiminomethyl‐1‐methylpyridinium iodide), 3‐PAM (3‐hydroxyiminomethyl‐1‐methylpyridinium iodide), and 4‐PAM (4‐hydroxyiminomethyl‐1‐methylpyridinium iodide) have been studied in the presence of cationic surfactants of same hydrophobic chain length (C₁₆) within the concentration range of 0.5–6.0 mM at pH 8.0 under the pseudo‐first‐order condition. The observed rate constant (k_obs) increases with increasing surfactant concentration culminating into a maximum, and this has been analyzed in detail following the concepts of micellar catalysis. The structure–activity relationship of the investigated oximes has been discussed, and 2‐PAM was found to be the most reactive among all the three investigated oximes for the cleavage of PNPA. Esterolytic decomposition of p‐nitrophenyldiphenyl phosphate with oximate ions (? CH?NO^?) was followed in cetyltrimethylammonium bromide micelles at pH 9.0, and 4‐PAM was the most reactive oxime for the micellar hydrolysis of phosphate ester. The apparent acid dissociation constants (pK_a) of the investigated oximes have been determined spectrophotometrically. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 569–578, 2011