Unsymmetrical Tetradentate Schiff Base Complexes Derived from 2,3-diaminophenol and Salicylaldehyde or 5-bromosalicylaldehyde

Salicylaldehyde or 5-bromosalicylaldehyde reacted with 2,3-diaminophenol in absolute EtOH in a 2:1 molar ratio to give new unsymmetrical Schiff bases (H₂L). The bases were used as ligands to coordinate Mn(III), Ni(II) and Cu(II) chlorides leading to [Mn^IIIClL] · EtOH and [M^IIL] or [M^IIL] · 2H₂O (M = Ni or Cu) complexes. Their structures were determined using mass spectroscopy, IR, u.v.–vis and ¹H-n.m.r. The cyclic voltammetry in acetonitrile showed irreversible waves for both ligands. Under the same experimental conditions, the complexes exhibited mainly the non-reversible reduction of the Ni(II) or Cu(II) ion to Ni(0) or Cu(0), while the reduction of Mn(III) to Mn(II) was found to be a quite reversible phenomenon.     

Electrodeposition of nanocrystalline Ni–Cu alloy from environmentally friendly lactate bath

A new environmentally friendly electroplating bath for Ni–Cu alloy deposition was developed. Lactic acid was used as a complexing agent. The influence of bath composition, current density, pH and temperature on cathodic polarization, cathodic current efficiency and alloy composition was studied. Different proportions of the two metals were obtained by using different deposition parameters, but at all [Ni²⁺] / [Cu²⁺] ratios studied, preferential deposition of Cu occurred and regular co‐deposition took place. The Ni content of the deposit increased with Ni²⁺ content and current density and decreased with temperature. The surface morphology of the deposited Ni–Cu alloy was investigated using scanning electron microscopy. The crystal structure was examined using the X‐ray diffraction technique. The results showed that the deposits consisted of a single solid solution phase with a face‐centered cubic structure. The crystallite size lies in the range of 12 to 25 nm for as‐plated alloys. Copyright © 2014 John Wiley & Sons, Ltd.     

Collisionally-induced dissociation of purine antiviral agents: mechanisms of ion formation using gas phase hydrogen/deuterium exchange and electrospray ionization tandem mass spectrometry

ESI and CID mass spectra were obtained for two purine nucleoside antiviral agents (acycloguanosine and vidarabine) and one purine nucleotide (vidarabine monophosphate) and the corresponding compounds in which the labile hydrogens were replaced by deuterium gas phase exchange. The number of labile hydrogens, x, was determined from a comparison of ESI spectra obtained with N(2) and with ND(3) as the nebulizer gas. CID mass spectra were obtained for [M+H](+) and [M -H](-) ions and the exchanged analogs, [M(Dx)+D](+) and [M(Dx)-D](-), produced by ESI using a Sciex API-IIIplus mass spectrometer. Compositions of product ions and mechanisms of decomposition were determined by comparison of the CID mass spectra of the undeuterated and deuterated species. Protonated purine antiviral agents dissociate through rearrangement decompositions of base-protonated [M+H](+) ions by cleavage of the glycosidic bonds to give the protonated bases with a sugar moiety as the neutral fragment. Cleavage of the same bonds with charge retention on the sugar moiety gives low abundance ions, due to the low proton affinity of the sugar moiety compared to that of purine base. CID of protonated purine bases [B+H](+) occurs through two major pathways: (1) elimination of NH(3) (ND(3)) and (2) loss of NH(2)CN (ND(2)CN). Minor pathways include elimination of HNCO (DNCO), loss of CO, and loss of HCN (DCN). Deprotonated acycloguanosine and vidarabine exhibit the deprotonated base [B-H](-) as a major fragment from glycosidic bond cleavage and charge delocalization on the base. Deprotonated vidarabine monophosphate, however, shows predominantly phosphate related product ions. CID of deprotonated guanine shows two principal pathways: (1) elimination of NH(3) (ND(3)) and (2) loss of NH(2)CN (ND(2)CN). Minor pathways include elimination of HNCO (DNCO), loss of CO, and loss of HCN (DCN). The dissociation reactions of deprotonated adenine, however, proceed by elimination of HCN and (2) elimination of NCHNH (NCHND). The mass spectra of the antiviral agents studied in this paper may be useful in predicting reaction pathways in other heteroaromatic ring decompositions of nucleosides and nucleotides.     

Mass spectral characterization of tetracyclines by electrospray ionization,H/D exchange,and multiple stage mass spectrometry

Electrospray ionization (ESI) and collisionally induced dissociation (CID) mass spectra were obtained for five tetracyclines and the corresponding compounds in which the labile hydrogens were replaced by deuterium by either gas phase or liquid phase exchange. The number of labile hydrogens, x, could easily be determined from a comparison of ESI spectra obtained with N2 and with ND3 as the nebulizer gas. CID mass spectra were obtained for [M + H]+ and [M - H]- ions and the exchanged analogs, [M(Dx) + D]+ and [M(Dx) - D]- , and produced by ESI using a Sciex API-III(plus) and a Finnigan LCQ ion trap mass spectrometer. Compositions of product ions and mechanisms of decomposition were determined by comparison of the MS(N) spectra of the un-deuterated and deuterated species. Protonated tetracyclines dissociate initially by loss of H2O (D2O) and NH3 (ND3) if there is a tertiary OH at C-6. The loss of H2O (D2O) is the lower energy process. Tetracyclines without the tertiary OH at C-6 lose only NH3 (ND3) initially. MSN experiments showed easily understandable losses of HDO, HN(CH3)2, CH3 - N=CH2, and CO from fragment ions. The major fragment ions do not come from cleavage reactions of the species protonated at the most basic site. Deprotonated tetracyclines had similar CID spectra, with less fragmentation than those observed for the protonated tetracyclines. The lowest energy decomposition paths for the deprotonated tetracyclines are the competitive loss of NH3 (ND3) or HNCO (DNCO). Product ions appear to be formed by charge remote decompositions of species de-protonated at the C-10 phenol.     

Mechanism of [M+H]+ formation in atmospheric pressure photoionization mass spectrometry: Identification of propionitrile in acetonitrile with high mass accuracy measurement and tandem mass spectrometry and evidence for its involvement in the protonation phenomenon

The role of propionitrile in the production of [M+H]+ under atmospheric pressure photoionization (APPI) was investigated. In dopant-assisted APPI using acetone and anisole, protonated acetone and anisole radical cations were the most prominent ions observed. In dopant-free or direct APPI in acetonitrile, however, a major ion in acetonitrile was detected and identified as propionitrile, using high accuracy mass measurement and collision induced dissociation studies. Vaporizing ca. 10(-5) M althiazide and bendroflumethazide under direct APPI in acetonitrile produced their corresponding protonated species [M+H]+. In addition to protonated acetonitrile, its dimers, and acetonitrile/water clusters, protonated propionitrile, propionitrile dimer, and propionitrile/water clusters were also observed. The role of propionitrile, an impurity in acetonitrile and/or a possible product of ion-molecule reaction, in the production of [M+H]+ of althiazide and bendroflumethazide was further investigated in the absence of dopant using propionitrile-d5. The formation of [M+D]+ species was observed, suggesting a possible role of propionitrile in the protonation process. Additionally, an increase in the [M+H]+ signal of althiazide and bendroflumethazide was observed as a function of propionitrile concentration in acetonitrile. Theoretical data from the literature supported the assumption that one possible mechanism, among others, for the formation of [M+H]+ could be attributed to photo-initiated isomerization of propionitrile. The most stable isomers of propionitrile, based on their calculated ionization energy (IE) and relative energy (DeltaE), were assumed to undergo proton transfer to the analytes, and mechanisms were proposed.     

Variability of two essential oils of Kundmannia sicula (L.) DC., a traditional Algerian medicinal plant

The essential oils of the aerial parts of Kundmannia sicula (L.) DC collected from two Algerian localities, El Kala (near the coast) and Béjaia (from a meadow about 10 km from the coast), were analysed by GC and GC-MS. Although both samples showed similar overall chemical compositions, the major components of the Béjaia sample were identified as being spathulenol (14.8%), caryophyllene oxide (12.2%), salvial-4(14)en-1-one (10.1%), 1,5-epoxysalvial-4(14)ene (5.2%) and germacrene D (3.2%), while in the ElKala sample the main compounds were found to be salvial-4(14)en-1-one (16.4%), 1,5-epoxysalvial-4(14)ene (6.5%), chrysanthenyl acetate (5.2%) and alpha-amorphene (2.9%).     

Three new flavonoid glycosides, byzantionoside B 6'-O-sulfate and xyloglucoside of (Z)-hex-3-en-1-ol from Ruellia patula

Three new flavonoid glycosides, demethoxycentaureidin 7-O-β-D-galacturonopyranoside, pectolinarigenin 7-O-α-L-rhamnopyranosyl-(1?→4″)-β-D-glucopyranoside and 7-O-α-L-rhamnopyranosyl-(1?→4″)-β-D-glucuronopyranoside, a new megastigmane glucoside, byzantionoside B 6'-O-sulfate, and a new (Z)-hex-3-en-1-ol O-β-D-xylopyranosyl-(1″→2')-β-D-glucopyranoside, were isolated from leaves of Ruellia patula JACQ., together with 12 known compounds, β-sitosterol glucoside, vanilloside, bioside (decaffeoyl verbascoside), acteoside (verbascoside), syringin, benzyl alcohol O-β-D-xylopyranosyl-(1″→2')-β-D-glucopyranoside, cistanoside E, roseoside, phenethyl alcohol O-β-D-xylopyranosyl-(1″→2')-β-D-glucopyranoside, (+)-lyoniresinol 3α-O-β-D-glucopyranoside, isoacteoside and 3,4,5-trimethoxyphenol O-α-L-rhamnopyranosyl-(1″→6')-β-D-glucopyranoside. Their structures were elucidated by means of spectroscopic analyses.     

Pressure‐Induced Conversion of a Paramagnetic FeCo Complex into a Molecular Magnetic Switch with Tuneable Hysteresis

A key challenge in the design of magnetic molecular switches is to obtain bistability at room temperature. Here, we show that application of moderate pressure makes it possible to convert a paramagnetic Fe^III₂Co^II₂ square complex into a molecular switch exhibiting a full dia‐ to paramagnetic transition: Fe^IICo^III ? Fe^IIICo^II. Moreover, the complex follows a rare behavior: the higher the pressure, the broader the magnetic hysteresis. Thus, the application of an adequate pressure allows inducing a magnetic bistability at room temperature with predictable hysteresis width. The structural studies at different pressures suggest that the pressure‐enhanced bistability is due to the strengthening of intermolecular interactions upon pressure increase. An original microscopic Ising‐like model including pressure effects is developed to simulate this unprecedented behavior. Overall, this study shows that FeCo complexes could be very sensitive piezo switches with potential use as sensors.     

Facile synthesis of Cu-LDH with different Cu/Al molar ratios: application as antibacterial inhibitors

Research on Chemical Intermediates - A range of Cu-LDHs has been synthesized by co-precipitation using metal nitrate precursors and sodium carbonate under varying molar ratios Cu/Al...     

Development of a Novel Automatic Potentiometric System for Determination of Selenium and Its Application in Pharmaceutical Formulations and Anodic Slime

Poly(vinyl chloride) polymeric membrane sensors containing Sn(IV) phthalocyanine dichloride (SnPC) and Co(II) phthalocyanine (CoPC) as novel electroactive materials dispersed in o‐nitrophenyl octylether (o‐NPOE) as a plasticizer are examined potentiometrically with respect to their response toward selenite (SeO₃^2?) ions. Fast Nernstian response for SeO₃^2? ions over the concentration ranges 7.0×10^?6–1.0×10^?3 and 8.0×10^?6–1.0×10^?3 mol L^?l at pH 3.5–8.5 with lower detection limit of 5.0×10^?6 and 8.0×10^?6 mol L^?1 and calibration slopes of ?25.4 and ?29.7 mV decade^?1 are obtained with SnPC and CoPC based membrane sensors, respectively. The proposed sensors reveals by the modified separate solution method (MSSM) a good selectivity over different anions which differ significantly from the classical Hofmeister series. A segmented sandwich membrane method is used to determine complex formation constants of the ionophores in situe in the solvent polymeric sensing membranes. Membrane incorporating CoPC in a tubular flow detector is used in a two channels flow injection set up for continuous monitoring of selenite at a frequency of ca. 50 samples h^?1. Direct determination of selenium in pharmaceutical formulations and anodic slime gives results in good agreement with data obtained using standard ICP method.