Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Half-sandwich titanium(IV) complexes with Kläui's tripod ligand

Treatment of [Ti(O-i-Pr)(2)Cl(2)] with NaL(OEt) (L(OEt)(-) = [CpCo[P(O)(OEt)(2)](3)](-), Cp = eta(5)-C(5)H(5)) afforded [L(OEt)Ti(O-i-Pr)(2)Cl] that reacted with HCl in ether to give [L(OEt)TiCl(3)] (1). The average Ti-O and Ti-Cl distances in 1 are 1.975 and 2.293 A, respectively. Reaction of titanyl sulfate with NaL(OEt) in water followed by addition of HBF(4) afforded [L(OEt)TiF(3)] (2), the Ti-O and Ti-F distances of which are 2.020(2) and 1.792(2) A, respectively. The Zr(IV) analogue [L(OEt)ZrF(3)] (3) was prepared similarly from zirconyl nitrate, NaL(Oet), and HBF(4) in water. The Zr-O and average Zr-F distances in 3 are 2.139(2) and 1.938(2) A, respectively. Treatment of 1 with tetrachlorocatechol (H(2)Cl(4)cat) afforded [L(OEt)Ti(Cl(4)cat)Cl] (4). The average Ti-O(P), Ti-O(C), and Ti-Cl distances in 4 are 1.972, 1.926, and 2.334 A, respectively. Hydrolysis of 4 in the presence of Et(3)N yielded the mu-oxo dimer [(L(OEt))(2)Ti(2)(Cl(4)cat)(2)(mu-O)] (5). The average Ti-O(P), Ti-O(C), and Ti-O(Ti) distances in 5 are 2.027, 1.926, and 1.7977(9) A. Treatment of 1 with 1,1'-binaphthol (BINOLH(2)) in the presence of Et(3)N afforded [(L(OEt))(2)Ti(2)(mu-O)(2)(mu-BINOL)] x 2BINOLH(2) (6.2BINOLH(2)). Complex 1 is capable of catalyzing ring opening of epoxides with Me(3)SiN(3) under solvent-free conditions presumably via a Ti-azide intermediate.     

Hamaker constants in integrated circuit metalization

A new method for determining Hamaker constants was examined for materials of interest in integrated circuit manufacture. An ultra-high vacuum atomic force microscope and an atomic force microscope operated in a nitrogen environment were used to measure the interaction forces between metals, dielectrics, and barriers used during the metalization portion of integrated circuit manufacturing. The materials studied included copper, silver, titanium nitride, silicon dioxide, poly(tetrafluoroethylene), and parylene-N. Spheres coated with a material of interest were mounted on AFM cantilevers and brought into contact with substrates of interest. The interaction force was measured as the cantilever approached the substrate but before the two surfaces came into contact, and also when the particle was pulled out of contact with the substrate. The Hamaker constant calculation from the contact measurement is based on an adhesion model that quantifies the contribution of geometrical, morphological and mechanical properties of materials to the measured adhesion force. Hamaker constants determined with this new approach were compared with values found by using the Derjaguin approximation for a sphere to describe the interaction force as the cantilever approaches the surface. Both approaches produced similar values for most of the systems studied, with variations of less than 10%.     

Determination of volatile components in peptic powder by gas chromatography-mass spectrometry and chemometric resolution

Gas chromatography-mass spectrometry (GC-MS) coupled with chemometric resolution upon two-dimensional data was proposed as a method for the analysis of volatile components in a traditional Chinese medicinal preparation peptic powder which contains Rhizoma Atractylodis, Pericarpium Citri Reticulatae, Cortex Magnoliae Officinalis and Radix Glycyrrhizae. Ninety-three components were separated and 65 of them were qualitatively and quantitatively analyzed which represented about 90.28% of the total content. With the help of chemometric resolution, the data were resolved into a pure chromatogram and a mass spectrum of each chemical component. The accuracy of qualitative and quantitative results was greatly improved by using the two-dimensional comprehensive information of chromatograms and mass spectra. The example showed that chemometric resolution could greatly enhance separation ability. This makes it possible to analyze complicated practical systems like traditional Chinese medicinal preparations with the help of coupled instruments and chemometric resolution methods.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

Ab initio and variational transition state approach to beta-C3N4 formation: kinetics for the reaction of CH3NH2 with H

The CH3NH2 molecule has been considered as either an important intermediate in methane and ammonia mixtures or a precursor in methylamine and hydrogen mixtures in the synthesis of carbon nitride thin films. The fast Hydrogen (H) abstraction from CH3NH2 is an important process involved in the formation of HCN or CNH in the chemical vapor deposition (CVD) of carbon nitride thin films. The energetic and kinetic characteristics of the H abstraction reaction from CH3NH2 by atomic H used in CVD of beta-C3N4 were studied using ab initio direct dynamics methods for the first time. Two primary processes were identified for this reaction: H abstraction from the CH3 group and H abstraction from the NH2 group. On the basis of ab initio data, the rate constants of each channel have been deduced by canonical variational transition state theory with small-curvature tunneling correction over a wide temperature range of 200 to approximately 3000 K. The theoretical results were compared with available experimental data.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

高效石墨浮选剂的合成

高效石墨浮选剂的合成金婵，薛玉，汪进，刘欣荣，秦英海（哈尔滨工业大学应用化学系哈尔滨１５０００１）（大庆石化总公司大庆）关键词石墨，浮选剂，合成，混合烃由于石墨具有良好的力学性能、导电、高熔点等性质，广泛用于原子能、宇航和民用工业。隐晶质石墨属于微晶...