Study of quenching of anthracene fluorescence by [60]fullerene

[60]Fullerene has been shown to have a very high quenching effect on the fluorescence of anthracene at room temperature in n-hexane, n-heptane and carbontetrachloride medium. The possibility that the quenching is due to ground state electron donor-acceptor (EDA) complex formation between [60]fullerene and anthracene has been shown to be untanable in the concentration range used ( approximately 10(-5)moldm(-3) in both anthracene and C(60)). No exciplex formation under the present experimental conditions has been observed. In the non-quenching solvents n-hexane and n-heptane the Stern-Volmer constant follows the right trend with respect to change in solvent viscosity but in case of the quenching solvent CCl(4), the trend is opposite.     

Pharmaceutical grade sodium [99mTc] pertechnetate from low specific activity 99Mo using an automated 99Mo/99mTc-TCM-autosolex generator

Performance study of a computer controlled automated closed cyclic module for the separation and recovery of ^99mTc from low specific activity (n, γ) ⁹⁹Mo using methyl ethyl ketone (MEK) solvent extraction technique named ⁹⁹Mo/^99mTc-TCM-AUTOSOLEX (Technetium automated solvent extraction) Generator is described. The entire system is automated and controlled by a user-friendly PC based graphical user interface that actually supervises process via an embedded system based electronic controller. The average yield of separation of ^99mTc was above 85 % and ⁹⁹Mo breakthrough in ^99mTc pertechnetate was <0.002 %. The sodium pertechnetate obtained was a clear solution having pH 6–7, Radiochemical (RC). Purity >99 %, MEK content <0.1 % (v/v), Al and Mo content <10 µg/ml. R. C. Purity of ^99mTc-radiopharmaceuticals studied was not less than 96 %. Bio-Quality control studies confirm that sodium pertechnetate obtained was sterile and pyrogen free. Imaging studies in animals and humans with limited radiopharmaceuticals show that the quality of ^99mTc-pertechenate obtained in the present module was good enough to do clinical study.     

Effect of the Kaolin Particle Size on the Pozzolanic Behaviour of the Metakaolinite Produced

This paper reports an investigation of the effect of the particle size of kaolin on its transformation to metakaolinite. Kaolin from the island of Milos was either crushed or ground in order to produce four samples with different degrees of fineness (residue at 500 μm: 0–71.8%). The samples were treated thermally under different conditions in order to determine the optimum treatment conditions. The conversion of kaolinite to metakaolinite and the structural changes in the material during treatment were investigated by means of TG and XRD, respectively. Each sample was incorporated into a type I cement, at 20% by mass of cement, and the compressive strengths of the resulting blended cements were measured. It is concluded that the particle size of the raw kaolin does not affect the thermal conversion or the pozzolanic activity of the material. The use of crushed kaolin has many benefits since the furnace load can be increased, while the grinding process is needed only to reduce the size of the metakaolinite particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Blue–violet photoluminescence from colloidal suspension of nanocrystalline silicon in silicon oxide matrix

We report room temperature visible photoluminescence (PL), detectable by the unaided eye, from colloidal suspension of silicon nanocrystals (nc-Si) prepared by mechanical milling followed by chemical oxidation. The PL bands for samples prepared from Si wafer and Si powder peak at 3.11 and 2.93 eV respectively, under UV excitation, and exhibit a very fast (～ns) PL decay. Invasive oxidation during chemical treatment reduces the size of the nc-Si domains distributed within the amorphous SiO₂ matrix. It is proposed that defects at the interface between nc-Si and amorphous SiO₂ act as the potential emission centers. The origin of blue–violet PL is discussed in relation to the oxide related surface states, non-stoichiometric suboxides, surface species and other defect related states.     

Chromium removal technologies

Chromium can exist in different oxidation states (e.g. 0, III, VI). Chromium can be both beneficial and toxic to animals and humans depending on its oxidation state and concentration. At low concentration, Cr(III) is essential for animal and human health. Chromium(VI) compounds are highly soluble, mobile and bioavailable compared to trivalent chromium. Chromium(VI) is dangerous for humans due to its toxicity and carcinogenic properties. The presence of hexavalent chromium in waste water is a potential hazard to aquatic animals and humans. Various methods are adopted for the removal of hexavalent chromium from industrial effluents. Among these different techniques, biosorption is the most promising one. In this process, the various components present in biomaterial reduce the toxic hexavalent chromium to non-toxic trivalent chromium. Algae, fungi and bacteria have biosorption properties, and cell walls are responsible for biosorption of dead biomaterial. But this process removes chromium from waste water very slowly. So for chemical modification of biosorbents, optimization of biosorption parameters is required to increase the effectiveness of this process.     

Choice of a suitable hetero-aromatic nitrogen base as promoter for chromic acid oxidation of dl-mandelic acid in aqueous media at room temperature

Chromic acid oxidation of dl-mandelic acid in the presence and absence of different promoters has been studied in aqueous media under the kinetic conditions [mandelic acid]_T ? [Cr(VI)]_T and [promoter]_T ? [Cr(VI)]_T at 30 °C. The promoters used in this oxidation reaction, picolinic acid (PA), 2,2′-bipyridine (bpy), and 1,10-phenanthroline (phen), are strong chelating ligands which form complexes with most transition metal ions. The reaction is first-order with regard to [H⁺], [mandelic acid]_T, and [Cr(VI)]_T and also has first-order dependence on [promoter]_T. HCrO₄ ^? was found to be kinetically active in the absence of promoters; in the presence of promoters the Cr(VI)–promoter complexes were believed to be the active oxidants. In this path the Cr(VI)-promoter complex in each case undergoes nucleophilic attack by the mandelic acid to form a ternary complex which subsequently undergoes redox decomposition involving 3e transfer as the rate-determining step. Among the three promoters oxidation is much faster with 1,10-phenanthroline.