Thermal and topographical characterization of polyester- and styrene/acrylate-based composite powders by scanning probe microscopy

The thermal properties of two conventional polyester-based toners and a chemically prepared styrene/acrylate toner with different thermal histories were studied by scanning probe microscopy (SPM) and differential scanning calorimetry (DSC). The thermal transition temperatures detected by SPM agreed with the results of the DSC measurements. The validity of SPM for detecting thermal transitions was further confirmed by studying two amorphous reference polymers with different glass transition points (T_g) and three crystalline reference polymers with different melting points (T_m). When the toner sample was heated by the SPM probe above the glass transition temperature of the toner powder (T_probe > T_g), changes occurred in the surface topography and roughness causing different levels of local sintering of the particles. A set of roughness parameters calculated from the SPM image data were used to quantify the most essential features of toner surfaces. Environmental scanning electron microscopy (ESEM) was used to study the penetration depth of heat dissipated by the SPM probe. The probe-annealing was compared with oven-annealing in order to establish the effect of thermal history on the thermal properties of the materials.     

Photochemical generation of highly destabilized vinyl cations: the effects of alpha- and beta-trifluoromethyl versus alpha- and beta-methyl substituents

The photochemical reactions in methanol of the vinylic halides 1-4, halostyrenes with a methyl or a trifluoromethyl substituent at the alpha- or beta-position, have been investigated quantitatively. Next to E/Z isomerization, the reactions are formation of vinyl radicals, leading to reductive dehalogenation products, and formation of vinyl cations, leading to elimination, nucleophilic substitution, and rearrangement products. The vinyl cations are parts of tight ion pairs with halide as the counterion. The elimination products are the result of beta-proton loss from the primarily generated alpha-CH(3) and alpha-CF(3) vinyl cations, or from the alpha-CH(3) vinyl cation formed from the beta-CH(3) vinyl cation via a 1,2-phenyl shift. The beta-CF(3) vinyl cation reacts with methanol yielding nucleophilic substitution products, no migration of the phenyl ring producing the alpha-CF(3) vinyl cation occurs. The alpha-CF(3) vinyl cation, which is the most destabilized vinyl cation generated thus far, gives a 1,2-fluorine shift in competition with proton loss. The experimentally derived order of stabilization of the vinyl cations photogenerated in this study, alpha-CF(3) < beta-CF(3) < beta-CH(3) < alpha-CH(3), is corroborated by quantum chemical calculations, provided the effect of solvent is taken into account.     

Acidity and ionic structure of molten alkali silicates

An attempt has been made to identify the structural elements in binary lithium, sodium, potassium and cesium silicate melts by voltammetry. In the lithium melts g-SiO₂ or quartz-like clusters are proposed, although other interpretations are possible. Further, a second voltammetric wave may be an indication of peroxo bonds in lithium melts. In sodium melts, anions derived from cristobalite have been confirmed by comparison with information from Raman spectra, as have the tridymite derivatives in potassium melts. The structural elements in cesium silicate melts resemble those of potassium. The influence of the alkali ion on the acidity of the melt is calculated and is found to increase in the order Cs < K < Na < Li.     

Identification of the apolipoprotein E4 isoform in cerebrospinal fluid with preparative two-dimensional electrophoresis and matrix assisted laser desorption/ionization-time of flight-mass spectrometry.

Apolipoprotein E (apoE) was isolated from human cerebrospinal fluid (CSF) from control individuals and patients with Alzheimer's disease (AD). The purification was performed with preparative two-dimensional electrophoresis (2-DE), involving liquid-phase isoelectric focusing (IEF) in the Rotofor cell in combination with sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and electroelution in the Mini Whole Gel Eluter. ApoE was characterized by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis of tryptic digests. The known change of Cys to Arg in position 112 of the apoE4 isoform was identified. This was detected in CSF from AD patients, reflecting the increased frequency of the apoE4 allele in this population. This peptide was not detected in CSF samples from healty control individuals. The use of this rapid electrophoretic separation in proteomic studies of CSF proteins provides single proteins, such as apoE, of high purity in yields sufficient for characterization by MALDI-TOF-MS. Characterization of proteins and their modifications (amino acid substitutions, glycosylation or phosphorylation) in CSF will be a useful tool in the investigation of the pathophysiology of brain disorders such as AD.     

Graph Optimization Approaches for Minimal Rerouting in Symmetric Three Stage Clos Networks

We consider routing in symmetrical three stage Clos networks. Especially we search for the routing of an additional connection that requires the least rearrangements, i.e. the minimal number of changes of already routed connections. We describe polynomial methods, based on matchings and edge colorings. The basic idea is to swap colors along alternating paths. The paths need to be maximal, and the shortest of these maximal paths is chosen, since it minimizes the rerouting that needs to be done. Computational tests confirm the efficiency of the approach.     

Peculiarities of crystal structures and magnetic properties of Cu(II) and Ni(II) mixed-ligand complexes on the 1,3-dithiole-2-thione-4,5-dithiolate basis

Mixed-ligand Cu(II) and Ni(II) complexes, [Cu(dmit)(bpy)]₂ (I), [Ni(dmit)(phen)₂] (II) and [Ni(dmit)(phen)₂]·CH₂Cl₂ (III) (dmit=1.3-dithiole-2-thione-4.5-dithiolate, phen=1.10-phenantroline, bpy=2.2′-bipyridine) have been prepared by ligand exchange between phen or bpy and (Bu₄N)₂[M(dmit)₂] (M=Ni, Cu) and characterized by elemental analysis, IR spectroscopy, single-crystal X-ray analysis and by investigation of magnetic and resonance properties. In complex I, the monomeric units form dimers in a head-to-tail arrangement by weak coordination bonds between copper and dithiolate sulfur atoms and π–π interactions between dmit and bpy from neighboring monomers. Dimers in I are further extended into chains by weak Cu–S(thione) contacts. In crystal packing of complex II and III, there exists a weak π–π interaction between two parallel phen molecules of the adjacent complexes. As a consequence, the magnetic and resonance characteristics of copper complex may be described in approximation of exchange-coupled pairs of Cu²⁺ ions with ion spin S=1/2. The nickel complexes are described by isotropic exchange model for single-site spin S=1.     

Assessment of doped ceria as electrolyte

A model describing the performance of a fuel cell based on 10 mol% gadolinia-doped ceria, Ce_0.9Gd_0.1O_1.95−x (CG10), was formulated. The total electrical conductivity of CG10 was measured under very reducing conditions in the temperature range of 753 K to 948 K. Oxygen permeation experiments were carried out to measure the leak current through a ceria electrolyte. The results of the measurements are compared with predictions of the formulated model. Furthermore, the response of a fuel cell to changing operating conditions such as external load, temperature, electrode polarization resistances, and defect chemistry is investigated using the model. It is found that the maximum achievable efficiency of a CG10-based fuel cell is increased when (1) the temperature is decreased, when (2) the electrolyte thickness is increased, or when (3) the cathode polarization resistance is decreased. The efficiency can also in certain circumstances be increased by an increase of anode polarization resistance. Finally, the efficiency is reduced if the vacancy formation enthalpy is decreased to the level of fine-grained CG10. The performance of a CG10-based cell is evaluated by comparing it with a state-of-the-art zirconia-based cell. At 873 K, the efficiency of a fuel cell with a 10-μm CG10 electrolyte was limited to 0.74, whereas a cell with a perfect electrolyte would have an efficiency of 1. The power output of the CG10 cell at this efficiency is, however, four times larger than the zirconia-based cell at the same efficiency. This is due to the much lower cathode polarization resistance of -CG10 cathodes on CG10 compared to the (La_0.75Sr_0.25)_0.95MnO₃ cathodes on stabilized zirconia.     

Low-dimensional compounds containing cyanido groups. XXI. Crystal structure, spectroscopic, thermal and magnetic properties of two polymorphous modifications of [Cu(men)2Pt(CN)4]n complex (men = N-methyl-1,2-diaminoethane)

Violet (1) and blue (2) polymorphous modifications of [Cu(men)₂Pt(CN)₄]_n (men = N-methyl-1,2-diaminoethane) have been prepared and investigated by IR and UV-vis spectroscopy, thermal analysis, measurement of magnetic data and X-ray structural analysis. Both modifications are formed by similar but differently packed zigzag chains, which consist of [Cu(men)₂]²⁺ moieties bridged by two trans arranged cyanido groups of [Pt(CN)₄]²⁻ units. The Cu(II) atoms in both structures are hexacoordinated by four nitrogen atoms in the equatorial plane from two molecules of bidentate men ligands with the average Cu-N(Me) and Cu-N(H₂) bond lengths of 2.046(8) and 2.008(8) Å, respectively, and by two nitrogen atoms from bridging cyanido groups in the axial positions at average distance of 2.50(7) Å. Broad nearly symmetric bands observed in the UV-vis spectra of 1 and 2 of ²B_1g → ²E_g transitions are consistent with a deformed octahedral coordination of the CuN₆ chromophoric groups. One and two ν(CN) absorption bands observed in the IR spectra of 1 and 2, respectively, are in agreement with different local symmetries of [Pt(CN)₄]²⁻ units and different Cu-N(cyanido) bond lengths in these polymorphs and are subject of discussion on the spectral-structural correlations in 1D compounds. The complexes are stable up to 238 °C when their two-stage thermal decompositions start and ending up with a mixture of CuO and metallic Pt as the most probable final thermal decomposition products. The temperature dependence of the magnetic susceptibility suggests the presence of a weak antiferromagnetic exchange coupling between Cu(II) atoms in 1, J/hc = −0.17 cm⁻¹ and in 2, J/hc = −1.3 cm⁻¹.     

Management of the risk of wind damage in forestry: a graph-based Markov decision process approach

This study deals with the problem of including the risk of wind damage in long-term forestry management. A model based on Graph-Based Markov Decision Processes (GMDP) is suggested for development of silvicultural management policies. The model can both take stochastic wind events into account and be applied to forest estates containing a large number of stands. The model is demonstrated for a forest estate in southern Sweden. Treatment of the stands according to the management policy specified by the GMDP model increased the expected net present value (NPV) of the whole forest only slightly, less than 2%, under different wind-risk assumptions. Most of the stands were managed in the same manner as when the risk of wind damage was not considered. For the stands that were treated differently, however, the expected NPV increased by 3% to 8%.     

Heavy neutrinos and lepton number violation in ?p colliders

We discuss the prospects of studying lepton number violating processes in order to identify Majorana neutrinos from low scale seesaw mechanisms at lepton-proton colliders. In particular, we consider the scenarios of colliding electrons with LHC energy protons and, motivated by the efforts towards the construction of a muon collider, the prospects of muon-proton collisions. We find that present constraints on the mixing of the Majorana neutrinos still allow for a detectable signal at these kind of facilities given the smallness of the Standard Model background. We discuss possible cuts in order to further increase the signal over background ratio and the prospects of reconstructing the neutrino mass from the kinematics of the final state particles.