The Efficient K Ion Storage of M2P2O7/C (M=Fe,Co, Ni) Anode Derived from Organic-Inorganic Phosphate Precursors

Metal phosphates have been widely explored in lithium ion batteries and sodium ion batteries owing to high theoretical capacities, mild toxicity and low cost. However, their potassium ion battery applications are less reported due to the limited conductivity and the slow diffusion kinetics. Considering these drawbacks, novel structured M₂P₂O₇/C (M=Fe, Co, Ni) nanoflake composites are prepared through an organic-phosphors precursor-assisted solvothermal method and a subsequent high temperature annealing process. The designed Co₂P₂O₇/C composite exhibits the highest rate capacity with 502 mAh g⁻¹ at 0.1 A g⁻¹ and good cyclability for 900 cycles at 1 A g⁻¹ and 2 A g⁻¹ when compared with Ni and Fe based composites. The superior electrochemical performance can be attributed to their unique nanoparticle-assembled nanoflake structure, which can afford enough active sites for K⁺ intercalation. In addition, the robust pyrophosphate crystal structure and the in situ formed carbon composition also have positive effects on enhancing the long-term cycling performance and the electrode's conductivity. Finally, this organic-phosphors precursor induced simple approach can be applied for easy fabrication of other pyrophosphate/carbon hybrids as advanced electrodes.     

Difference systems of sets based on cosets partitions

Difference systems of sets （DSS） are combinatorial configurations that arise in connection with code synchronization. This paper proposes a new method to construct DSSs, which uses known DSSs to partition some of the cosets of Zv relative to subgroup of order k, where v = km is a composite number. As applications, we obtain some new optimal DSSs.     

Synthesis and mesomorphic properties of 4-[(4-n-polyfluoroalkoxy-2,3,5,6-tetrafluorophenyl)ethynyl]phenyl fluoro-substituted benzoates

A series of 4-[(4-n-polyfluoroalkoxy-2,3,5,6-tetrafluorophenyl)ethynyl]phenyl fluoro-substituted benzoate liquid crystals have been synthesized. Their phase transition temperatures have been measured by optical polarizing microscopy and confirmed by DSC. The results show that a highly fluorinated terminal chain impairs mesomorphic properties.     

Novel WS2/Fe0.95S1.05 Hierarchical Nanosphere as a Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Fe_0.95S_1.05 with high reactivity and stability was incorporated into WS₂ nanosheets via a one-step solvothermal method for the first time. The resulted hybrid catalyst has much higher catalytic activity than WS₂ and Fe_0.95S_1.05 alone, and the optimal WS₂/Fe_0.95S_1.05 hybrid catalyst was found by adjusting the feed ratio. The addition of Fe_0.95S_1.05 was proven to be able to enhance the hydrogen evolution reaction (HER) activity of WS₂, and vice versa. At the same time, it was found that the catalytic effect of the hybrid catalyst was the best when the feed ratio was W : Fe=2 : 1. In other words, we confirmed that there is a synergistic effect between W- and Fe-based sulfide hybrid catalysts, and validated that the reason for the improved HER performance is the strong interaction between the two in the middle sulfur. WS₂/Fe_0.95S_1.05-2 hybrid catalyst leads to enhanced HER activity, which shows a low overpotential of ∼0.172 V at 10 mA cm⁻², low Tafel slope of ∼53.47 mV/decade. This study supplies innovative synthesis of a highly active WS₂/Fe_0.95S_1.05 hybrid catalyst for HER.     

Adaptive Laser Aiming Through 2 km Horizontal Atmosphere with Precise-Delayed SPGD Algorithm

Journal of Russian Laser Research - Laser aiming is one of the key technologies of laser atmospheric transmission. The beam actually is affected by atmospheric turbulence and mechanical vibration;...     

Two heptadentate Co(III) and Mn(III) complexes with partially deprotonated cyclen derivative bearing four hydroxypropyl pendants: structure,DNA binding and DNA cleavage

Two new complexes, (Co^III)₂(H₃L^?)₂(0.5H₂O)₂(ClO₄)₄ (I) and (Mn^III)₂(H₃L^?)₂(0.5H₂O)₂ (ClO₄)₄ (II), were synthesized and crystallographically characterized [H₄L = 1,4,7,10‐tetra‐(2‐hydroxypropyl)‐l,4,7,10‐tetraazacyclododecane] using electrospray ionization mass spectrometry and X‐ray photoelectron spectrometery. The characterizations confirmed that the valences of the metal ions increased from divalent to trivalent due to deprotonation of one OH group (H₄L was in the form of H₃L^?). Owing to the instability of Co(III) and Mn(III) in both air and in solution, they preferred to exist in divalent form. The two heptadentate complexes are extraordinary in that the chiral pendants of the complexes are different in configuration. Spectroscopic studies, viscosity measurements, thermal denaturation experiments and circular dichroism spectra demonstrated that the complexes were prone to interact with DNA by groove binding. At micromolar concentrations and under physiological conditions, the two complexes were able to oxidatively cleave the supercoiled pUC19 plasmid DNA into its nicked and linear forms. Mechanistic studies using various additives suggest the complexes had structures different from those of other inorganic complexes. These are the first reported inorganic complexes not containing planar aromatic ligands and yet binding at the major groove. Copyright © 2012 John Wiley & Sons, Ltd.     

Facile Fabrication of Nanorod‐Assembled Fluorine‐Substituted Hydroxyapatite (FHA) Microspheres

Nanorod‐assembled FHA microspheres with different F contents were for the first time prepared through a facile one‐step hydrothermal method. The effect of the reaction time and pH value of reaction solutions on the FHA morphology was investigated to elucidate the self‐assembly process of FHA microspheres. The results showed pH values had significant effect on the morphology of the formed FHA crystals, which were self‐assembled into sphere‐like sturctures at high pH conditions and rod‐like structures at low pH values. The results suggested that formation of FHA crystals with varied morphology may be directly related to Ca²⁺ release kinetics from EDTA‐Ca‐Na₂ at different pH conditions. Furthermore, it was found that the chemical stability of FHA microspheres was dependent on the F content in the materials, and high F contents in FHA microspheres lead to improved chemical stability. These results suggest that the prepared self‐assembled FHA microspheres may be used for teeth substitution materials due to their unique hierarchical structures and controllable chemical stability.